- Messages
- 23
Yes, and also a BW curved soprano.@Toots so you got a BW bari in the end?
Yes, and also a BW curved soprano.@Toots so you got a BW bari in the end?
My other horn I have is a (slightly leaking) King Zephyr low Bb.
I expected to like the Kings tone more, but this wasn't the case. I prefere the modern sound. And I need a low A for Bigband, which I didn't expect either. So you never know....
Intonation and ergos are not bad on the King but I think I'll sell it sooner or later. I don't need two baris.
Regarding the Mark VI, the two biggest innovations were the tilting Bb lever on the pinky table, and the logo on the octave key. I’m sure there were some other changes to bore and tone hole location between the SBA model that preceded it. But as you point out, those kinds of changes happened during the 20 year run of the Mark VI too.The Selmer Mk VI was introduced over 75 years ago in 1954, and from what I can gather it helped revolutionise saxophone design with several new features. Like any radically new design (and its associated manufacturing process), it’s not surprising to me that problems were encountered and corrected during its production run of 20 years. In the case of the Mk VI this included corrections to intonation problems. Clearly intonation issues are a very poor feature in any instrument and one which manufacturers will make great efforts to avoid or correct. Presumably nowadays saxophone designs are stable, and manufacturing methods are greatly improved compared with yesteryear. Are there any examples of modern (say post-2000) or currently produced saxophones that are known to experience intonation problems?
For anyone interested there is a list of mk vi production changes here. As you mention there were changes to the cone angle of the body as well as three variations in bow length.Regarding the Mark VI, the two biggest innovations were the tilting Bb lever on the pinky table, and the logo on the octave key. I’m sure there were some other changes to bore and tone hole location between the SBA model that preceded it. But as you point out, those kinds of changes happened during the 20 year run of the Mark VI too.
I own a SBA alto, and the horn I had previously was a Mark VI (which I sold to buy the SBA), and from an ergonomic standpoint, there was no change in where I placed my fingers, or indeed in the overall experience of playing the horn.
Regarding intonation, no saxophone made is perfectly in tune. Most can be PLAYED in tune, but we need to use our old-fashioned flesh and cartilage appendages, attached to the sides of our heads, for that.
Bottom line, the VI is a great horn, and IMO stands out as the pinnacle of hand-made saxophone manufacture. But it’s definitely an evolutionary step, not a radical change. Were they the “best” in their time? Absolutely. Are they the “best of all time”? Not so sure of that, there are some really great modern horns out there. That said, my Mark VI tenor is not for sale, and my daughter has strict instructions on how to dispose of it when I pass on!
Actually in the early 1970's whilst a member of the 264th Army Band, Honolulu (the Army Band of the Pacific), the supply room had about 8 saxes that were older Bueschers about to be excessed. I tried them, the intonation on them was truly bad, difficult to play in tune. (The oldest in the inventory, they were in deep need of tech attention.)Regarding intonation, no saxophone made is perfectly in tune. Most can be PLAYED in tune, but we need to use our old-fashioned flesh and cartilage appendages, attached to the sides of our heads, for that.
Seems today with other manufacturers, they would introduce these changes as a new different model.For anyone interested there is a list of mk vi production changes here. As you mention there were changes to the cone angle of the body as well as three variations in bow length.
A very good point, well made! 🙂 But no doubt some are less imperfect than others 😉Regarding intonation, no saxophone made is perfectly in tune. Most can be PLAYED in tune, but we need to use our old-fashioned flesh and cartilage appendages, attached to the sides of our heads, for that.
Setup matters. Key heights can make a huge difference in how in tune a saxophone plays. And then there is the issue of mouthpiece placement / embouchure / voicing. Finding the right spot for a your mouthpiece is, IMO, critical to being able to play in tune. And of course, there are those older (1920's and '30's) vintage horns that require large or medium chamber pieces because of the neck geometry.Actually in the early 1970's whilst a member of the 264th Army Band, Honolulu (the Army Band of the Pacific), the supply room had about 8 saxes that were older Bueschers about to be excessed. I tried them, the intonation on them was truly bad, difficult to play in tune. (The oldest in the inventory, they were in deep need of tech attention.)
Based on that experience alone, I'd be of the impression that Bueschers were the worst domestic brand available.
Seems today with other manufacturers, they would introduce these changes as a new different model.
They don't call it the devil's horn for nothing...A very good point, well made! 🙂 But no doubt some are less imperfect than others 😉
Perhaps I was not as clear as I should have been. My point was that this appeared to be an isolated incident. Also I would not rule out the government's habit of seeking the lowest bid, which sometimes results in work that reflects marginal technical competence.I have not heard that Bueschers in particular are less in tune than, say, Conns or Selmers. I suspect that your experience with them is not typical; lots of people play them and have no issues. I played a Buescher tenor in high school, it had been refurbished, and it played very well. With a Brilhart LevelAire 🙂
I think my GAS is fairly well suppressed at the moment I have a BW baritone plus BW curved and straight sopranos which are currently my main instruments / back ups for each other. A localish store has both a straight and a curved BW sop for sale at the moment. Second Hand Bauhaus Wallstein Curved Soprano SaxYes, and also a BW curved soprano.
That’s all really interesting, thank you. I noticed that there are two build versions of the BW saxes: standard and deluxe. As far as I know, deluxe versions are indicated by the letter D at the end of the model number. For the brass-finished baritone, for example, this would be BS-YD instead of BS-Y. Do you have the deluxe or standard models, and do you think it makes any particular difference?I think my GAS is fairly well suppressed at the moment I have a BW baritone plus BW curved and straight sopranos which are currently my main instruments / back ups for each other. A localish store has both a straight and a curved BW sop for sale at the moment. Second Hand Bauhaus Wallstein Curved Soprano Sax
