Saxophones Recommendations for first Baritone

means a modern Low-Bb bari could've lost it's acoustic balls in the transitions to and from its original form
I wouldn't have thought it would make any acoustic difference. Maube the low Bb would sound a bit different on a low Bb bari compared with the low Bb on a low A baritone of the same model, but purely to being the lowest note and the tube ending at the Bb. I can't see why it would affect other notes significantly
 
If you're going to buy your first baritone saxophone ....

..... the best you find if money is not a problem. A new Selmer, Yamaha, Yani ....... You don't have to worry too much. Ready to play.
..... a new intermediate? Less money .....
..... a new beginner bari? You are probably going to from a big on-line seller.
..... used baritone. You will probably need at least 50% of the price to pay tech to make the bari in basic playing condition (change some pads, cleaning, oiling, adjust keys, cure leaks, some new corks/felts )

I saw a nice Dolnet Bel Air bari to low Bb. Probably made in the mid or late 60's. Not made in France. Ok condition. Nickel plated, It went for 7500. 00 s e k (c 590.00 GBP). If you spend around 250.00-300.00 GBP on the Dolnet you would probably have an ok bari. It was not sold on internet, an ordinary "small add" for private persons. For ten years ago I would grab it. A good first baritone for less money.
 
I'm fairly sure I know the origin of the System 54 instruments and it has nothing to do with P.Mauriat. There is a lot of hearsay, speculation and maybe wishful thinking out there.

I would be quite confident that Howarth's own line would be good though.
Went into howarths today and was told the same line of same factory as mauriat, presumably they aren’t lying to customers!

regardless of where it was built the sax was awfully dull and didn’t have much bari fun to it on my (albeit close tipped mouthpiece) - not for me!

the octave mech and low note keys were also not very ergonomic! relative to both conn-selmer and yani bari’s
 
Last edited:
I don't mind admitting that I don’t know enough to say for sure, but I think the P.Mauriat low Bb Bari may be an adaptation of a low A Bari (as opposed to the Conn 11M being a low A adaptation of a Bb) .
I can't verify this as it is second hand, but apparently the reason the PMB-302 came to be was that Jason Marshall was approached by P. Mauriat to play their baris, and since at that time he was only playing low Bb horns, he said he would do it if they made him a low Bb version of their bari. So yes, perhaps Mauriat had the tooling used to produce the low A modified to produce the low Bb.

There are recent videos of Jason stating his current preference for the low A, also a P. Mauriat.
 
Last edited:
I saw that but it went off FB straight away so I think someone has got in first.
Worth giving Pete an email anyways as if you tell him your looking for a bari in a certain budget you might get first dibs!

The YBS-62 I got from him at a £500 discount and with first dibs as I told him I only had £3000 to spend on a bari when I bought an alto from him, he emailed me with pics of the bari when he got it! Fair warning you'll have to go to Southend to get the bari tho as he doesn't ship them🙂
 
Worth giving Pete an email anyways as if you tell him your looking for a bari in a certain budget you might get first dibs!

The YBS-62 I got from him at a £500 discount and with first dibs as I told him I only had £3000 to spend on a bari when I bought an alto from him, he emailed me with pics of the bari when he got it! Fair warning you'll have to go to Southend to get the bari tho as he doesn't ship them🙂
It’s a long trek to Southend from here and so probably a non starter at moment unfortunately
 
More of an indication of the quality of the production line and the implication that those who like how the factory tunes the mauriat's might like the chiltern/howarths
I wouldn't immediately reach that conclusion. It depends partly on what is meant by "tunes the Mauriats"

Any factory can make identical looking instruments but with different quality control and different playing characteristics. My experience is limited but it comes from talking to agents for both Taiwanese and Chinese Instruments.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,433
Members
8,130
Latest member
tommyliehe
Back
Top Bottom