Saxophones Recommendations for first Baritone

To play the baritone saxophone is fun. I played a Weltklang low A in a punk rock band in the late 70's. I traded the bari for a Selmer MkVI saxophone bass. A wreck that would cost me lots of money to get back in good playing condition. I was soo happy when I sold the bassax. But I wanted a baritone so I bought a "The Martin Baritone". I've to work hard to make my bari to sing well. Nowadays I just play baritone at home or out in the woodshed. The days when I played baritone in a 3-horn section are gone. I was more or less the only horn/saxplayer and it was the tenor that I played 90% of the time.

I think it's easier to play like a baritone on tenor than to play like a tenor on baritone!?!?!
 
Last edited:
These jupiter bari’s always seem to have a bit of a muted mid register though - that was a sticking point for the jbs1000 and you can hear it in recordings of the 593 too.
Mine doesn't. Using my preferred mouthpiece (Yanagisawa metal 9) it's consistent and punchy right through the range.
 
Still looking. Any thoughts on Hanson baritone saxophone used | eBay
I saw that one. Immediate though was the seller doesn't give enough detail. No indication of which model it is, what the mouthpiece is, and the pictures are absolutely awful. Might be worth following up to ask some questions and get some reasonable pictures. I would very much doubt they'd get any bids even at the starting price with an advert as bad as that one.

It's amazing anyone thinks they can sell an item for the thick end of two grand without any details or reasonable pictures.
 
I saw that one. Immediate though was the seller doesn't give enough detail. No indication of which model it is, what the mouthpiece is, and the pictures are absolutely awful. Might be worth following up to ask some questions and get some reasonable pictures. I would very much doubt they'd get any bids even at the starting price with an advert as bad as that one.

It's amazing anyone thinks they can sell an item for the thick end of two grand without any details or reasonable pictures.
He didn't seem to know anything about it in messages - other than that it's "lovely". hmm
 
There 'may' be a very nice old H Couf low Bb on eBay right now....not in the best condition but plenty of gas left in the tank.
It's OK to post a link, as long as it's not yours?:

 
To buy a baritone sax is not easy. Play before you buy. A baritone that is bad condition and not playing well needs more money to reach a good playable level. Play before you buy means play several hours/day and if possible with the band/group you are going to play it. The combo mouthpiece - baritone is a lot more complicated than for a tenor, alto. A good baritone mouthpiece is expensive.

If it's possible to trace the manufacture you can save some money. Ok, Selmer, Selmer US, Conn, Buescher, Buffet, B&S (Weltklang), Amati, Kohlert, .... and later Yamaha, Yanagisawa .... were big to made and sell their own saxes. But they made saxes for other brands as well. I don't understand why I should spend more money on a stencil when I buy the "original" (or close) for less money.
 
I actually spoke with the main 'Brass' guy at Thomman concerning a colour variation of the brass between the website picture and what actually arrived(wearing my 'nerd' hat) and was told in the general conversation Mauriat are the only ones that bother with a Bb as a 'stock' version. I also bought a Thomman silver plated 'custom line' curved soprano, and that I think is also a mauriat stencil. Thomman run 3/4 different 'lines' of curved soprano some are 'Chinky' some Taiwan, my two arrived clearly marked 'made in Taiwan'. Must add the Thomman 'setup' was first class.

Thommans purchasing power is immense and they are not afraid to deviate from the norm(look at their 'gamble' on a Bass...it's a stock item). I really have always liked MelodyC's... I've owned/played them for 50+ years.(back in the day when you all laughed… 😉 ) I missed the Aquila Sax re-manufacture episode but when Thomman took the plunge approx. 8 years ago I bought one of the first (silver plate) C's it's been a great player and worn well(I play it almost every day)
So then can we conclude that the LowJazz is in fact either made from the same components and assembled in the same facility as the P. Mauriat 302, or made from the same components and assembled elsewhere?

Or is there just no way to know for sure?
 
So then can we conclude that the LowJazz is in fact either made from the same components and assembled in the same facility as the P. Mauriat 302, or made from the same components and assembled elsewhere?

Or is there just no way to know for sure?
I would not conclude that. It may well be it is made from the same design template but I don't think there is enough difference in tooling, etc to assume that just because it looks the same it is from the same facility. I don't mind admitting that I don’t know enough to say for sure, but I think the P.Mauriat low Bb Bari may be an adaptation of a low A Bari (as opposed to the Conn 11M being a low A adaptation of a Bb) .

But there isn't much difference for manufacturing apart from removing a key and linkage and stamping out a shorter bell.

But I'm still always dubious when someone says "it's identical therefore is a stencil made in the same factory" when in fact it could be made in a different factory, just to the same design. And a design can be sold, licensed, reverse engineered or stolen. And once you put that possibility into the mix you can have different raw materials, different skill and different QC.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,433
Members
8,130
Latest member
tommyliehe
Back
Top Bottom