soprano clarinet I posted earlier in another thread, its mouthpiece apparently was never cleaned by the previous clarinetist.
Today, I took an old worn toothbrush and dish soap, got most off but still had some stubborn residue that would not come off. So, it will need further cleaning work with something more abrassive like a green pad. It needs more TLC.
I found after examining its markings that it is a Bundy #3, even has in nice signature script,
"Geo. M. Bundy" on the portion covered by the ligature.
Further research it is hard rubber, the default mouthpiece that came with these clarinets when new.
(Discontinued, some music stores want $95 for these new! (unsold stock) I would opt for a less expensive Yamaha 4C or Bari Esprit)
The nickel plated 2-screw sheet metal lig has the words on the back side,
France
Al Sax
D. Bonade
Patent Pending
A bit better than budget ligs, it has 2 welded or silver soldered metal bars about 0.5 mm thick and 3 mm wide the full width of the lig, weld bonded along both sides of the lig joined by the screws. These are the contact pressure points for the reed. So I am happy about this. After cleaning with soap, water and toothbrush, the couple spots small spots about 2 mm in diameter at the edge where acidic saliva corroded pin holes in the plating cleaned up so it is less noticeable. Corrosion wasn't rust. Possibly brass?