Mouthpieces Graftonite for tenor

I dunno, to each his own. Last night used the $20 mouthpiece kit (with lig and cover) Bari Esprit tenor in community band rehearsal. Tip gap wise, I say roughly equivalent. YMMV.
For me, a Yamaha 4C was great to get started followed with a 5C which was easier, sweeter and a bit more manipulable. Before I got a Soloist Style Long-shank E which is a dream! (thank you @Pete Thomas) I bought a Bari Esprit tenor but I just cannot get on with it. There are many positive reviews of it on here, @ghostler seems impressed so I thought it was me.

Compared with the Yams and the Soloist the Esprit sounds bright and unsubtle.
I asked MrsC which she thought sounded nicer - I didn't tell her beforehand which I preferred. She thought the Soloist was 'lush' and the Esprit 'harsh'.

The more discussions I read about mouthpieces, reeds, sax, ligatures, embouchures et al. the more "I dunno, to each his own." rings true!
 
the Esprit sounds bright and unsubtle.
I have learned that one needs to adjust the reed to the embouchure and mouthpiece. Also, I have learned that I can control the "brightness" by the embouchure, reed, and breath support I use.

Yes, there are some truly terrible mouthpieces. I have not found the Bari Esprit to be one of them.
 
Yes, there are some truly terrible mouthpieces. I have not found the Bari Esprit to be one of them.
@ghostler Don't mean to sound like I'm denigrating the Esprit or your experienced opinion.
There's nothing wrong with the Esprit, easy to blow, good through the range, powerful when needed etc. but I personally didn't like it.
I have learned that one needs to adjust the reed to the embouchure and mouthpiece. Also, I have learned that I can control the "brightness" by the embouchure, reed, and breath support I use.
I agree that some of the issue could have been me but I hear a much better sound from the Soloist or the 5C. I know in another thread I was bemoaning my tone but this is different. Same embouchure, breath support and reed brand /strength on both, the Esprit sounded less pleasant (to me).

Different folk, different physiognomies, different hearing, different sound preferences. :thumb:
 
I love a good deal. So when I read all the rave reviews about Metallite (which I assume is similar to Graftonite), I bought alto, tenor and bari for about $20 each. I figured what have I got to lose. I found out the answer was precisely $60. I'm with @turf3 and @JayeNM, better to save up a little more money and get a good mouthpiece instead. Just a little more can get you a high quality, low cost Yamaha.
 
Count me in the β€œDon’t Like Graftonite” camp. I have two. I don’t mind spending money on mouthpieces, I kind of enjoy it actually, but I won’t be buying any more of those, even as candidates for practicing refacing.
 
Last edited by a moderator:
Rico mouthpieces, Klangbogens, necks and double lip embouchures are some of the most divisive sax subjects around. Religious fervor on both sides, no middle ground. Best to just agree to disagree.
 
Rico mouthpieces, Klangbogens, necks and double lip embouchures are some of the most divisive sax subjects around.
I was too old for Sesame Street, but one thing isn't like the others. I mean... you need a mouthpiece. You need a neck. You need an embouchure. Like what you did there though. One day it will stick.
 
I love a good deal. So when I read all the rave reviews about Metallite (which I assume is similar to Graftonite), I bought alto, tenor and bari for about $20 each. I figured what have I got to lose. I found out the answer was precisely $60. I'm with @turf3 and @JayeNM, better to save up a little more money and get a good mouthpiece instead. Just a little more can get you a high quality, low cost Yamaha.
The Metalite is nothing like the Graftonite. The Metalite is coarse, bright and punchy. Can be useful depending on circumstances, but it really is limited to noisy rock sax, in my opinion. Graftonites come in a total of nine variations, with different baffles and tip openings, so they vary from quite warm to quite bright. But the brightest of them is nothing like as brash as the Metalite.
 
Have you lately checked mouthpiece prices available to us in US? There really isn't much to choose from in the $25 to $45 category except for entry level beginner mouthpieces, just saying.

Nice mouthpiece, yes, (I have the alto S90-190), but got a bit of sticker shock when I looked it up. It cost more than a $200 US Mendini alto sax that I donated to a high school student several months ago: $339 US.
Well, your reply has a bit to debate. First off ...."except entry-level beginner mouthpieces".

OK...what the heck is a Rico, though ?
Because that's exactly what it is. It is nothing but, and was never intended to be anything but.

Next...there ARE others at that price point which are better.

Hite Premier if you are OK with a moving-towards medium tip. (Nobody considers a Hite Premier a "beginner" 'piece, it is firmly established as a step-up 'piece).

Bari Esprit, a great cheapie...you even admitted that yourself a few posts above πŸ˜‰

Fobes Debut, harks back to old-school design.

Any of those 3....are significantly more refined and better finished than any Rico, Graftonite, Metalite, whatever.

So again, -given these three simply are built more precisely, blow better, and sound better, all of them sub $50 Tenor, sub $40 alto 'pieces....why spend that $ on a Rico ?


The ONLY reason Ricos have remained in circulation was because they were so dang cheap...almost forever. But the thing is, now, today....even THAT is harder to argue for because....they ain't $9 anymore....they are $25-40.
That's absurd, imho. They aren't worth that....
 
Wow, what a tough crowd. I guess I have been out of the online community for a while. Trying to figure out when the world turned against Graftonite & Metalite MPs. Sure, they have always had their detractors b/c of their price, but quite frankly, what people are writing here is new to me.

My experience with them is mostly limited to the original ones. I have played, and even have had a couple of the newer, re-introduced ones. All played very well. I still recommend them to many students, and schools for their school horns.

Arnold Brilhart originally designed these MPs. The bari and soprano pieces are most definitely regarded as the best, while the alto & tenor pieces are regarded alright.

I originally was given a bari Graftonite piece by my tech in Halifax back around 2001 or so. He told me to try it on my Mark VI, and suggested that it would be a good backup--replacement--piece for my vintage, HR Berg that I was so protective of.

I must admit I was impressed. It did everything my Berg did, except "break" when pushed too hard. (You Berg bari players likely know what I'm talking about.) I ended up using the Graftonite piece for over a decade, and even added an original Metalite piece for when I really needed my VI to sound edgy. 😎

I also added a Graftonite soprano to my collection and used it for years, before switching to a Runyon Custom--another brand that has fallen out of favour. πŸ˜‰

I have had a series of articles on my site about these MPs for years. These were some of the most popular articles for a really long time. Why? B/C people really liked the old pieces, and really wanted them to be reintroduced again.

I realize there are many more MP choices out there now then there were say, 20, or even 10 years ago. However, I try to avoid making blanket statements about any brand of anything if I can avoid it. What works for me, or what I have experienced, might not jive what other people have experienced.

Look no further than Stephen Howard's insistence that JK has a problem with the rings on its rolled tone, SX90R leaking. My experience is 100% different.

I worked for a JK dealer, and even own a JK with this type of rolled tone holes. Guess what? It doesn't leak. Nor do any of the others the shop had/has for sale.

I am not saying that a Metalite or Graftonite MP is the right choice for everyone. Far from it. But that's why it's important to try gear BEFORE you buy it.

I realize that in this day on online shopping this concept has become old fashioned, and perhaps even quaint. But before you spend hundreds of $$ on anything, don't you want to make sure it's right for you? And let's face it, when it comes to MPs, necks, ligs, reeds, & horns, it is anything but one size fits all.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,272
Members
8,127
Latest member
PJ2116
Back
Top Bottom