- Messages
- 12,964
- Location
- KIC 8462852
Then one of them came up with some crapper ideas.Sometimes. But in cases where there was water in the pipes they couldn't solder so they used leather until somebody came up with the bread trick.
Then one of them came up with some crapper ideas.Sometimes. But in cases where there was water in the pipes they couldn't solder so they used leather until somebody came up with the bread trick.
Brown tape happens !Brilliant idea. I've wasted 2 1/2 years.
Off to the post office to get some tape right away.
And where did they shove the bread stick?Sometimes. But in cases where there was water in the pipes they couldn't solder so they used leather until somebody came up with the bread trick.
Done it many times myself. Shove the bread in the pipe, it makes a great seal or plug for about 15 minutes and then dissolves. Saved my ass more than once in old structures.And where did they shove the bread stick?
Ah, I get it!
That conjured up a rather unfortunate image.Done it many times myself. Shove the bread in the pipe, it makes a great seal or plug for about 15 minutes and then dissolves. Saved my ass more than once in old structures.
Strangely that's the same image I had when asking the question.That conjured up a rather unfortunate image.
That is also a time when some water pipes where made from lead using the first industrial twin screw extruder. Could be tricky to solder lead pipes as they melt almost as fast as the solder.Sometimes. But in cases where there was water in the pipes they couldn't solder so they used leather until somebody came up with the bread trick.
'Because it's there' was the reply given to the question of why he wanted to climb Everest by George Mallory, he and Andrew Irvine were the first to conquer the mountain.Just as Edmund Hilary said: because it was there.
As an innovator in saxophone pads I feel I should react to this topic. First I want to point to Iwan Müller was the first known inventor to use a leather felt pad and a metal ligature around 1810. So This pad exists for more than 200 years. Of which my silicon pad project only used 17. Making it the longest R&D project I have ever done. The fastest was to bring a new product in production in three hours and the second longest was to introduce a new concept in candy in 9 years.
I am a bit embarrassed by this, but it is a one man project with minimal back-up against the gold standard in pads backed by most of the saxophone world.
So why did I decide to go against the gold standard. Just as Edmund Hilary said: because it was there.
Now for the argumentized version. There is a small flaw in the gold standard of a leather felt pad on a perfectly flat tone hole. Saxophones are made of bendy material so the tone holes do not stay flat in the long run.
Correcting this without using abrasive methods is a Sisyfus labor. Using a file means that you lose some material and in the long run the tone hole becomes too shallow for leather pads.
So the project is to make a usable seal on a non-flat saxophone tone hole. You can do this with a leather pad, but it is sub standard and doesn't last as long as a leather pad on a flat tone hole.
All other pad projects I know of work with the assumption of perfect flat tone holes and have a similar small flaw.
At the moment I am confident in fitting small and medium sized pads in a reasonable time. Small corrections can be done in one day due to the hardening time of the silicone paste used.
The order of my present priorities for this project are:
1 have fun
2 doing large pads faster
3 understanding the differences between rolled and straight tone holes for this method
4 ordering the first industrial made version of these pads
5 expanding to ringpads for a padless system
6 looking for a more optimal type of silicon.
Agreed with one exception. Working on lots of sopranos lately, I did find that the depth of the seat, that is how far the center cushion sticks into the tone hole definitely makes a difference in intonation. Gorilla grip makes the notes play sharp. But that's really just noticeable on sopranos, even on alto, there is hardly any difference.“Don’t stay flat in the long run”??? Why would you make such a statement?
“In the long run the tone hole becomes too shallow…”. How is it that people are playing saxes over 50 years old? Shouldn’t those tone holes have disappeared a long time ago?
I’m all for you having fun with your projects, but your claims are just false.
As to rolled vs straight tone holes, modern pads work just fine on either.
It has not been my experience that once a tonehole has been correctly* levelled, it does not stay flat. I regularly work on horns that I'd carried out tonehole work on decades ago - and aside from a little dressing to remove hardened gunk deposits from the rims, they're as flat now as they ever were. And if they're not it's always as a result of damage.Saxophones are made of bendy material so the tone holes do not stay flat in the long run.
Correcting this without using abrasive methods is a Sisyfus labor. Using a file means that you lose some material and in the long run the tone hole becomes too shallow for leather pads.
still only opinions and no arguments?“Don’t stay flat in the long run”??? Why would you make such a statement?
“In the long run the tone hole becomes too shallow…”. How is it that people are playing saxes over 50 years old? Shouldn’t those tone holes have disappeared a long time ago?
I’m all for you having fun with your projects, but your claims are just false.
As to rolled vs straight tone holes, modern pads work just fine on either.
There are some technicians who can keep it to 1/10 of a mm but there are a lot more technicians who work at 2 mm in 30 years.Agreed with one exception. Working on lots of sopranos lately, I did find that the depth of the seat, that is how far the center cushion sticks into the tone hole definitely makes a difference in intonation. Gorilla grip makes the notes play sharp. But that's really just noticeable on sopranos, even on alto, there is hardly any difference.
Grinding down tone holes, with a little bit of swabbing one may lose 1/10 of a mm in the course of 50 years. so that's the part I don't buy.
As for rolled tone holes, I can see an effect with respect to seat depth but other than soprano, nobody will be able to hear the difference.
It is good to hear that I am a bit pessimistic on the bendy character of saxophones. Still dents and dent work can affect the flatness of the tone hole. I have a lot of technicians in my family so I know how difficult non-abrasive leveling is and I decided to reach the same effect with a method more fitting to my skill level.It has not been my experience that once a tonehole has been correctly* levelled, it does not stay flat. I regularly work on horns that I'd carried out tonehole work on decades ago - and aside from a little dressing to remove hardened gunk deposits from the rims, they're as flat now as they ever were. And if they're not it's always as a result of damage.
If the work is done properly it's a one-time operation - and if remedial work is necessary, the initial process of mechanical levelling will reduce the amount of dressing required to the region of a few thou.
* Taking into account the flex in the tubing during the levelling process.
Toneholes only become too shallow because of inappropriate levelling methods. The exclusive use of rotary (or large flat) files defers to the lowest dip - resulting in an excess of metal being removed. This is not a problem with the process - rather the method.
Non-abrasive levelling methods require a fair degree of skill, experience and bespoke tooling - so yes, it's initially a slow process...but one that speeds up considerably once you've 'got your eye in'.
I think your original statement was rather more than a bit of pessimism - it came across more like "I have studied this phenomenon in depth and can categorically say that...".It is good to hear that I am a bit pessimistic on the bendy character of saxophones. Still dents and dent work can affect the flatness of the tone hole. I have a lot of technicians in my family so I know how difficult non-abrasive leveling is and I decided to reach the same effect with a method more fitting to my skill level.
Agreed with one exception. Working on lots of sopranos lately, I did find that the depth of the seat, that is how far the center cushion sticks into the tone hole definitely makes a difference in intonation. Gorilla grip makes the notes play sharp. But that's really just noticeable on sopranos, even on alto, there is hardly any difference.
Grinding down tone holes, with a little bit of swabbing one may lose 1/10 of a mm in the course of 50 years. so that's the part I don't buy.
As for rolled tone holes, I can see an effect with respect to seat depth but other than soprano, nobody will be able to hear the difference.
It is good to hear that I am a bit pessimistic on the bendy character of saxophones. Still dents and dent work can affect the flatness of the tone hole. I have a lot of technicians in my family so I know how difficult non-abrasive leveling is and I decided to reach the same effect with a method more fitting to my skill level.
