Saxophones Venus Baritone

Have you ever thought of writing a book - geat story, had me laughing... Tell your mate, if he doesn't want to keep that bari, there's a good home waiting for it here in Bavaria....

Kev, if I wrote a book about my life as a musician in the early sixties, I'd be in court with lot's of people (selebs) gunning for me. Believe me I have lot's of stories to tell, all of them very spicey :w00t:

John.
 
Kev, if I wrote a book about my life as a musician in the early sixties, I'd be in court with lot's of people (selebs) gunning for me. Believe me I have lot's of stories to tell, all of them very spicey :w00t:

John.
Sounds like a good retirment plan to me - just think how many zeroes you can tag on for the gagging rights ;} Even better, you could just let it be known that you were writing it and not actually write it >:)
 
You sly old dog, John!
Martin and I reckoned you were up to something - he reckoned you had rather a spring in your step, and I thought you had the look of a man who'd dropped a quid and found a tenner.

Regards,
 
You sly old dog, John!
Martin and I reckoned you were up to something - he reckoned you had rather a spring in your step, and I thought you had the look of a man who'd dropped a quid and found a tenner.

Regards,

Stephen, I was splashing money about, but still forgot to give you the tenner I feel I owe you for the work you did.
The next time we meet, please remind me about this post!!!!

John.
 
Wot work??
We had a bit of a natter while I was working on one horn or another, but I don't rememeber doing anything for you.

Or was it the old ploy of keeping me talking while you craftily substituted the horn I was working on for one of your own!!?

Regards,
 
Last year??
I can't even remember what I was doing last week!!

Regards,

This getting old thing and the memory going to pot, is really worrying. It was in August this year :shocked:
My memory really has gone up the creek, I have a sound clip of the Venus on my H2, but can't rember how to get it on the sound clip thread! It doesn't sound to good, but that's down to me, not the instrument! I am still recovering from the radio therapy treatment I finished over a year ago and am still a bit short of breath (excuses, excuses) ;}

John.
 
Last edited by a moderator:
This getting old thing and the memory going to pot, is really worrying. It was in August this year :shocked:
My memory really has gone up the creek, I have a sound clip of the Venus on my H2, but can't rember how to get it on the sound clip thread! It doesn't sound to good, but that's down to me, not the instrument! I am still recovering from the radio therapy treatment I finished over a year ago and am still a bit short of breath (excuses, excuses) ;}

John.

Just think how much good all these heavy breathing exercises are doing you.:thumb:
At least with a bari, you don't need to use the phone>:)
 
It's coming,
I listened to the clip on the H2 and decided it didn't do the sax justice (I'm going to blame the Chinese m'piece ;}). The Metalite 'piece arrived last week, but I just haven't had the time to do any playing. The amateur stage show I'm involved in is all I can think about at the moment (wish I'd never got involved 🙁).
What I will say, is that the small amount of time I've played the sax, seemed to affect the way my tenor sounded, but the gigs on Thursday and Sunday, all was back to normal - Strange :confused:

John 🙂🙂🙂🙂🙂🙂;}
 
Having had the 'Venus' bari for a few months now, I feel that I can now give it a fair appraisal.
A visual inspection revealed some very minor acid bleed, but apart from that it looked well set up and impressive.
The first attempts at playing scales with the m'piece (Chinese, tip opening about 0.100") supplied and using a Fibracell reed, showed that the sax had indeed been well set up, with all notes sounding cleanly (I was really surprised as this was a new reed straight out of the box!). The m'piece though, did, I feel let the sound down. So a Metalite M7 was ordered!
Upon examination of the m'piece, to my inspectors eye, the machining of the table wasn't concentric to the chamber opening and so required reworking. I spent half an hour rubbing it back and forth on a sheet of glass paper, while applying pressure to one side,so as to correct the error. After that it played perfectly!
Now we come to the main problem, and this is serious and to be watched out for!!!!!
After a week of playing, I thought that the m'piece was getting loose on the cork, as it appeared to be moving up and down.
I was mistaken, it was the neck socket that had come away from the body!!
What had happened was that the two screws that hold the bracing strut (that fits between the body and neck socket), had not been fully tightened. Which meant that the full leverage from the neck/ m'piece, was being transmitted directly to the socket, resulting in the failure of the soldered joint!
Now some will say that I should have sent it straight back to the supplier, but as I had successfully made the same repair before (to a tenor sax), I couldn't be bothered with the hassle.
The repair was quite simple. All it involved was to thoroughly clean up the soldered area, mask off the surrounding lacquer and using an incredible adhesive called J-B Weld (tensile strength 3,600 PSI) glue the socket back in place, fit the bracing strut. Leave for 24 hours, and that was that. No visible sign of a repair (probably stronger than original!).
I did contact the supplier and inform him of the problem of both the socket and the mouthpiece. He was of course most apologetic and said he would inform the manufacturer.
So the lesson is, always check all screws for tightness.
Am I satisfied with my 'Venus' bari. - YOU BET, I'm over the moon with it (my wife says that I would take it to bed with me if I could!). Would I recommend it - Yes - but do check all screws for tightness!!!!!
As for the m'piece,
After rework, it performs perfectly. I love the sound and use it all of the time. I just need a new set of lungs :w00t:

John 🙂;}
 
Thanks for the update. Although lots of people will say you should have returned it when the socket failed, I'm with you when it comes to making a simple repair to avoid the hassle (and time without sax).

JB Weld is indeed amazing stuff. They also do another one called Water Weld which is FDA approved for use in drinking vessels. It's great for reconstructing missing bite plates or chips from ebonit mouthpieces.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,576
Members
8,133
Latest member
walthang
Back
Top Bottom