Mouthpieces upgrade alto mpc

For alto specifically, a metal mouthpiece will not necessarily be an upgrade. What’s wrong with your current piece? What are you trying to achieve by switching mouthpieces? Answers to these questions might result in some more definitive suggestions.

If the tip opening is measured in thousandths of an inch, a 77 is somewhere between a 6 and a 7, using Meyer numbers. Most other makers are in that same ballpark, though the exact opening may be slightly different. That may help you in your search.
 
Vote:
Upvote 0
The NYZ is an old mouthpiece that I've used for many, many years. I don't know anything about it, except that it's not a high baffle. So, I was wondering if anyone knows anything about it - chamber size etc, that would help me get something similiar in a metal piece. I tried a high baffle piece, but didn't like it.
I don't want to get into a massive rabbit hole of getting lots of mouthpieces. I have very few!
 
Vote:
Upvote 0
The Selmer Jazz is a metal piece, with low, roll over baffle. They measure their openings in metric.

The closest to a 0.077" is an F at 1.95mm.

I myself play a Selmer D. I have tried an E but found it too wide. Maybe an F would be too wide.

Yanagisawa do a nice metal mouthpiece. A quick Google will reveal tip opening equivalents.
 
Vote:
Upvote 0
Another option is the Jody Jazz DV NY. And Theo Wanne has several low baffle metal pieces - Earth, Gaia and Mantra. All of these are on the pricey side, except for Earth which is only just high priced, not stratospheric 🙂

Good luck in your search. You might also look at other hard rubber pieces. Theo Wanne’s new Essentials line is actually made of a hard resin material, and they are a little smaller than a traditional hard rubber piece.

BTW, in Jody Jazz or Theo Wanne, you would want a size 6. They are 0.076” tip opening, so almost exactly the same as your current piece.
 
Vote:
Upvote 0
Why do you want to change a good HR lowish baffle (probably a rollover) for a metal one? Why not just keep playing the MP you have? What is it not giving you that you want, and why do you think a metal mouthpiece will give it you??
 
Vote:
Upvote 0
Why do you want to change a good HR lowish baffle (probably a rollover) for a metal one? Why not just keep playing the MP you have? What is it not giving you that you want, and why do you think a metal mouthpiece will give it you??
It's very very old, and very discolored - I've been playing it for nearly 20 years, and I did get it 2nd hand.
I have a metal mouthpiece on tenor, and it's much easier to keep clean, and generally a bit more hygienic. That's the main reason I want to change to a metal piece.
 
Vote:
Upvote 0
Age and discoloration have nothing to do with whether a mouthpiece is doing what it needs to do.

If you bought it second hand 20 years ago, I'm sure that any schmutz in it is YOUR schmutz by now.

Wash it periodically with hand soap and cold water, just like you'd do with anything else you put in your mouth.
 
Vote:
Upvote 0
If you like the mouthpiece, you can improve its looks by rubbing it gently with olive oil. Don’t use hot water to clean it, that discolors it.

Personally, I don’t really care how my mouthpieces look. I do care how they play. Swab after each use, and occasionally cold water and Dawn dish soap to clean.
 
Vote:
Upvote 0
Don’t use hot water to clean it, that discolors it.
Or even warm water
Personally, I don’t really care how my mouthpieces look. I do care how they play.
The other thing to care about is how they taste. HR mouthpieces that have been left in the sun or gone green for other reasons can taste quite nasty.
 
Vote:
Upvote 0

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,294
Members
8,127
Latest member
PJ2116
Back
Top Bottom