Accessories The buzz oversized neck screw

I noticed recently little figurines, angels etc for sale, that fit into your empty lyre socket. Purely decorative, useless and fun. I think we get too focused on functionality and forget whimsy and silliness. Who wouldn't want some little effigy of a mythical being or hero stuffed into their lyre socket for no apparent reason. πŸ€”
 
Lubrication enables more torque to be applied and will stress the screw, promoting premature failure. Brass isn't steel.
Disagree. Lubrication permits the screw to properly engage the threads without binding, extending the life of the threads.

It should not require excessive tightening to hold the neck in place.

An instructor will usually teach this to the pupil the first week of class.

I imagine techs like @PigSquealer , @turf3 , @JayeNM , etc. may have come across a sax neck socket on the sax body that required thread repair or shrinkage of the stretched socket brass metal to get the neck to fit and secure leak free, because some guerilla muscled it frequently.
 
Keeping the neck and lig screws, as well as the threaded holes they go into, clean, and a very very light coat of oil, is what I do.
Gorilla hands over torque.
My VI, requires just a gentle twist, to keep the neck in place. Being careful, with how I put the neck in the horn, never in a clumsy hurry, is prudent.

When strobing or adjusting a guitar's string height, at the bridge, I loosen the string, before turning the screws.

Oil or lubricants can capture stuff, so take the time to inspect and clean.
In the wood/metal shop, on some tools, I use graphite powder, to keep things moving freely, as oil attracts more stuff.
Comes in different grinds, like coffee.

Don't Blame Me.
IMG_4896.webp
 
I noticed recently little figurines, angels etc for sale, that fit into your empty lyre socket. Purely decorative, useless and fun. I think we get too focused on functionality and forget whimsy and silliness. Who wouldn't want some little effigy of a mythical being or hero stuffed into their lyre socket for no apparent reason. πŸ€”
Mr PigSquealer will now have a flying pig no doubt..
 
Don't Blame Me.
IMG_4896.webp
You got a point. I've replaced overtightened self-tapping screws in various plastic cased appliances around the house and musical instrument electronics to include radios, amps, speakers, even plastic car panels, where previous owner thought he was doing good. Over time, a universal ATX computer case needs an oversized, because the only thing holding the scrrew in place is the sheet metal behind without a spot welded nut. Sometimes it is not another's fault, just a poor design. (And a few times younger I played the guerilla.) 😳

Usually requires an oversized screw, possible redrilling the cover. When I bin something, I salvage the easily accessible screws, nuts, botls, washers, kept in a tin on the shelf for future repairs. Where case is plywood or particle board, the self cut screw threads wear out, needing an oversized screw. Other option I have used is drill hole slightly larger, glue in a wood dowel, then drill a new hole in the dowel after glue dries.

Back to the neck screw, if the orignal wing bolt has been properly lubricated, it will tighten the joint sufficiently without having to resort to an oversized hand-knob screw. This is most preferred. And this is why I resort to cork grease. It is readily available, is easily wiped off with a paper towel. The socket can easily wiped down of old lubricant and easily put back into order.

Basically you will even get dust and dirt if you do nothing. Keeping the joint dry over fear of dust and dirt just causes premature wear by metal rubbing against metal. Some of these threads are not deep and course, which makes them easier to prematurely wear them out without some form of lubricant.

Anyway, my 2 (of your favourite denomination of coin). πŸ˜‰
 
Looking into this new technology as we speak. Prototype without wings and dry fit shows potential. Will attempt a test with a high pressure waterproof anti crossive grease. Chops Lube for screwy needs appears to be marketable.
View attachment 30123
A bit of an undignified position for the poor old piggy there, I was thinking something a bit more 'heroic' tbh πŸ™‚
 
I've made a bunch of them myself and tried them all, including a spectrum analyzer. The ligature worked better but I didn't like the look too much.

@LostCircuits Have you played with the spectrum analyzer to learn how much you can vary the spectra using only physical inputs (oral cavity, embouchure, etc.) while keeping setup constant? I can hear a substantial variation in my tone while manipulating my inputs. I wonder how those scale compared to the effect of a ligature or K-bogen. The next order of interest would be mapping the spectra of various reeds (ex. changing reed stiffness, changing reed cut).
 
@LostCircuits Have you played with the spectrum analyzer to learn how much you can vary the spectra using only physical inputs (oral cavity, embouchure, etc.) while keeping setup constant? I can hear a substantial variation in my tone while manipulating my inputs. I wonder how those scale compared to the effect of a ligature or K-bogen. The next order of interest would be mapping the spectra of various reeds (ex. changing reed stiffness, changing reed cut).
That was exactly my point in one of the other threads - somewhere here on the cafe - where the effect of ligatures was discussed. Even the slightest change in embouchure, reed alignment etc. has a much greater impact on tone than any of the "boosters - bΓΆgen - screws"
 
I guess lubricating the neck tenon screw would do no harm, but I've been using my Mark VI tenor for 45 years on a very regular basis, and I've never lubricated that screw. It has always worked smoothly and still does to this day. I've never over-tightened it, though and haven't had any problem with the neck tenon leaking. In fact, as @John Laughter mentioned, I can leave the screw untightened, the tenon still doesn't leak, and the horn plays fine. However, the screw needs to be tightened to prevent the neck from turning, so I do tighten it gently. Never had a problem with it and I sure am not enough of a sucker to fall for those oversized 'buzz screws'. I'll stick with the neck screw that came with the horn.
 
I guess lubricating the neck tenon screw would do no harm, but I've been using my Mark VI tenor for 45 years on a very regular basis, and I've never lubricated that screw. It has always worked smoothly and still does to this day.
Perhaps your tech during COA lubricated it for you, so you did not have to do it? I go for long periods without lubbing it. But if I notice it acts like it needs it, then I do it; same with keys. But then my saxes were not maintained by a tech until recently. I was doing my own teching, which may explain oddities. And because I speak from memory, since I don't keep records, even that sometimes is more by premonition (if you know what I mean).

Example:
Purchase Year - Make / Model - Tech Service Year
2012 - used Vito (Jupiter) Tenor - 2025
2012 - new Venus Soprano - 2025
2003 - used Selmer Bundy II Alto - 2025
2016 - new Venus Tenor - 2025

The first 2 it was 13 years, 3rd - 22 years, 4th - 9 years before a tech touched. The Bundy, I purchased it serviced. Over time replaced a couple pads, installed missing cork bumpers, put a new neck cork. Others, occasional missing cork bumpers. The Jupiter? Over time, a couple pads, bumpers, neck cork. Then, seems rest of the pads needed replace, so I did my first repad. Tech completed the adusting.

Just a side note: I must have done the repad acceptably, because the comment was further adjustments needed on some pads to correct leakage. If I didn't do it right, he might have recommended a complete overhaul.

Those who have their saxes regularly serviced may never have to worry about it at all.
 
Perhaps your tech during COA lubricated it for you, so you did not have to do it?
Good point. And yeah, I thought of that. You could well be correct. I have an excellent tech.
Those who have their saxes regularly serviced may never have to worry about it at all.
+1. I learned my lesson on this many years ago when my Mark VI tenor became nearly unplayable. At the time, I didn't realize it needed to be checked out once in a while (at least every couple of years, or more often depending on how much you play). The horn was full of leaks and needed a complete overhaul. Once that was done, it was like a brand-new horn, maybe better. Since then, I've kept it pretty well-maintained. Usually, it will need a couple of pads replaced, depending on how long I let it go. I did recently get a re-pad done when I had let it go a bit too long.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway πŸ˜€

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,292
Members
8,127
Latest member
PJ2116
Back
Top Bottom