Saxophones Selmer Pennsylvania serial numbers

I'd love to know who made abd where mine was made,
When it comes to baritone saxes it's not easy to say who made it. A bartione sax can be a collaboration betwen two saxophone makers. Lets say a saxopnone producer got an order for 300 baris. They didn't had the capacity so they outsourced some of the order.

Your bari is close to a Malerne Artist. I'm nnot saying is a Malerne Artist .... it' soo hard to say who did what and why.
1760353815426.webp
 
When it comes to baritone saxes it's not easy to say who made it. A bartione sax can be a collaboration betwen two saxophone makers. Lets say a saxopnone producer got an order for 300 baris. They didn't had the capacity so they outsourced some of the order.

Your bari is close to a Malerne Artist. I'm nnot saying is a Malerne Artist .... it' soo hard to say who did what and why.
View attachment 30876
Thank you I have not heard of Marlene artist what’s their history ?
 
It sounds as if Selmer London stencilled different saxes over the years Kohlert in the 1930s Italian brands later and then Yanagisawa. I had a 1930s Kohlert made baritone labelled Pennsylvania Special Made in Czechoslovakia. It was really good soloing, loud if it needed to be and clear people used to comment on what a nice sound it made but it had taken a battering over the years and was prone to spring leaks so a real battle if, as was often the case you had to try and play bass lines. I really regretted getting rid of the Jiffy stand it came with (especially when I saw how much they were). I bought it from Trevor Jones in Bristol. I bought a Bauhaus Walstein when I found myself playing Bari annd sold the Pennsylvania. I was somewhat anttached to it but the B-W is good. I noticed that Trevor Jones had sold my old Pennsylvania recently again 25 or so years later. Vintage Pennsylvania Baritone Saxophone
 
This thread illustrates the difficulty in identifying stencil horns. Selmer Penn, as noted by others, was made by a lotta different mfrs over time.

Ed's links above clearly show TWO different mfr versions, then Kohlert was mentioned as another.
The horn in question is neither, it looks Italian.

Helen's site suggests Borgani....but that is an extrapolation- because she was examining a Tenor, not a baritone.

I think by it's keyguards, bellbrace location, and the generic pinky table which appeared on stencil horns made by Malerne, Santoni, early Grassi, and others....this is actually an Orsi, not a Borgani.

One other thing which leans me that way - I have never seen an early Borgani that uses that stock, Malerne-Santoni style pinky table. I do not think Borgani ever sourced those pinky tables.
I would say I am 70% confident it's Orsi.

Borgani of course still exists, you could email them and send some pics and ask. But unfortunately, unlike Rampone-Cazzani, which still has an archival historian type guy on-board (Claudio), I am not sure Borgani entertains those sort of inquiries anymore,.
But you can try

So IMHO - you'd want to dig up a serial list for Orsi.
I do not believe that will be possible....I do not know where one would be.
But that is what you'd wanna do.

I can guesstimate this:
... the sheet guards on Orsis stylistially suggest a 60's-70's sax.
I have seen older Orsis with wire guards, which seem to predate the 1960's based on other details (keywork, posts, mechanisms, etc.)

These with sheet guards seem to be slightly later.
 
I've had a few horns with the Orsi key guards which don't have the heart shaped centres of the OP's horn.

Have a look at the baris in the Orsi catalogue, courtesy again of @helen here:


I'd like Helen to weigh in with her thoughts... Helen, are you there?...
 
Yup, I'm here. Doesn't look like any Orsi I have seen. I have A LOT of Orsi and Orsi stencils of all models in our gallery. This doesn't look like any of them.

There were also Italian horns that used parts that appeared to come from both Orsi & R&C. After reaching out to R&C, they confirmed that their parts appeared to have been used, but it wasn't their horn. This tells us there was likely some some homeworking business buying parts from established companies and making stencils.

If we are thinking Italian, then yes, Borgani is a better bet. But as @JayeNM points out, this is based on a tenor. However, it wouldn't be surprising to see left-sided bell keys on a bari. As all of us bari players know, the bigger horns are always the last to see design improvements. πŸ˜‰
 
Yup, I'm here. Doesn't look like any Orsi I have seen. I have A LOT of Orsi and Orsi stencils of all models in our gallery. This doesn't look like any of them.

There were also Italian horns that used parts that appeared to come from both Orsi & R&C. After reaching out to R&C, they confirmed that their parts appeared to have been used, but it wasn't their horn. This tells us there was likely some some homeworking business buying parts from established companies and making stencils.

If we are thinking Italian, then yes, Borgani is a better bet. But as @JayeNM points out, this is based on a tenor. However, it wouldn't be surprising to see left-sided bell keys on a bari. As all of us bari players know, the bigger horns are always the last to see design improvements. πŸ˜‰
Thx for contributing .Horn here has some details resembling this Orsi below, on first glance, the keyguards and spat key touches, minus the reverse bellbrace....whih is why I went there. Also Orsi tended to locate their wire bellbraces LOW on the bell, the way the OP's looks. Which is why I went there....But yeah, Borg used those keyguards as well, if memory serves.

Screenshot 2025-10-21 101526.webp
 
Thx for contributing .Horn here has some details resembling this Orsi below, on first glance, the keyguards and spat key touches, minus the reverse bellbrace....whih is why I went there. Also Orsi tended to locate their wire bellbraces LOW on the bell, the way the OP's looks. Which is why I went there....But yeah, Borg used those keyguards as well, if memory serves.

View attachment 31040
Oh, this reminds me of a horn I had pics sent to me of... Huh... I will have to dig through my photos to see if I still them.

Edit/update:

Here's why it looked familiar, it's the same damn horn. πŸ˜‰

 
Oh, this reminds me of a horn I had pics sent to me of... Huh... I will have to dig through my photos to see if I still them.

Edit/update:

Here's why it looked familiar, it's the same damn horn. πŸ˜‰

No.... if you look at the details of the blades of grass, you can see that it's a different species of lawn πŸ˜›
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,223
Members
8,127
Latest member
PJ2116
Back
Top Bottom