'cept he wrote "bari", not "Bari"....so not really confusing, eh ? (If Bari made a 'Graphtonite' model, heck I would probably try it....)
I appreciate your insights and inputs, pure gold.
It is all a part of understanding or misunderstanding one's communication. At least we do not have a brand yet named "Barry's"
(or do we?).
But the beauty of decent cheapies is you can pay around a total of $85 and get three of 'em.
That explains my motivation for experimenting with the Graftonites. It allows me to try out different chamber sizes, tip opening gap and facing length to help narrow down the specifics say, for another brand / make of mouthpiece. Also, I have found specific Graftonites that are decent and work for me. The "Graftonite" plastic used is tougher, withstands teeth marks better than the legacy Brilhart plastic mouthpieces of the 1970's.
sometimes enjoy to order from China and try. Usually they are so closed to be unplayable for me. But this is one is a 0.95 no name black plastic that can actually be played.
Graftonite B5 Mouthpiece:
Interestingly the Graftonite B5 mouthpiece for tenor sax I tried today has the same tip gap. This is with me playing on my recently repaired Le Blanc Vito 7133T tenor made by Jupiter.
(Closest match I could find was the Jupiter JTS-689. The Jupiter plays extremely well in tune, it's tone is superb, definitely a keeper for me, couldn't ask for anything more.)
Today I found that it is actually a decent performing mouthpiece.
(Please note, your results may be different.) I put a new Rico Jazz Select 2.0 tenor reed on it. I can get that classic breathy tenor tone from it. I definitely have projection from it, would be good for large room / outdoor play.
The B5's spec's using D'Addarrio's numbers: SKU# RRGMPCTSXB5, tip gap 0.95" (2.41mm), facing length 23mm (0.906"), chamber Medium.
I have had good luck with the B5 "Medium" chamber mouthpieces on my sop, alto, baritone and now my tenor.
Graftonite C Chamber Mouthpieces:
The C5 I purchased a while back did not work well with me, until I mounted a soft baritone sax reed on it. It's spec's (D'Addarrio's): SKU# RRGMPCTSXC5, tip gap 0.95" (2.41mm), facing length 23mm (0.906"), chamber Small.
I cannot explain the differences because apparently the facing length and gap are the same. Yet I have not experienced satisfactory results with either the C5 tenor or C7 alto mouthpieces.
Yet, the Berg Larson small chambered metal mouthpiece that I used on my alto sax while with a military band in Hawaii back in the 1970's worked well with me with good projection in stage band and outdoor play. There is something about that Graftonite C chambering that just doesn't work well with me.