Saxophones Corton Foreign tenor .

So my friend bought the Corton foreign tenor , for 325 pounds of eBay , however on delivery it’s great condition solid clean , no dinks crisp engraving original felts and corks all in place and tip top to be honest

However it would not play looking at it the palms key pads look dried out and one is persisted. I noticed the other pads all original not bad condition with big metal resonators.

He complained to eBay and rather than the stress of packing it and posting it would you believe rather than sending back the seller offered and refunded him 225 pounds so it’s cost him 99 pounds and a few pence.

I looked at horn it like a tank hardly been played looking at it , the question is it worth him putting money into it to no doubt will need pads and serviced , he wants to use it for busking so makes sense as it’s a robust horn.

Due to the mechanical condition is it worth putting money into to get sorted as it’s only cost him 99 quid .

Interesting I found the below video about Amati factory.
 
So my friend bought the Corton foreign tenor , for 325 pounds of eBay , however on delivery it’s great condition solid clean , no dinks crisp engraving original felts and corks all in place and tip top to be honest

However it would not play looking at it the palms key pads look dried out and one is persisted. I noticed the other pads all original not bad condition with big metal resonators.

He complained to eBay and rather than the stress of packing it and posting it would you believe rather than sending back the seller offered and refunded him 225 pounds so it’s cost him 99 pounds and a few pence.

I looked at horn it like a tank hardly been played looking at it , the question is it worth him putting money into it to no doubt will need pads and serviced , he wants to use it for busking so makes sense as it’s a robust horn.

Due to the mechanical condition is it worth putting money into to get sorted as it’s only cost him 99 quid .

Interesting I found the below video about Amati factory.
£99 is a lot closer to what I'd have paid than £325. A full repad will take it out to the original purchase price, which, personally, I feel to be more than the sax is worth. I'd be inclined to take it to a repairer and ask that the minimum work be done to make it play. If it's just the palm keys that won't be much. It'd then make an ideal busking horn. Stick a loud, bright mouthpiece on and it'd also be a good rock sax.
 
So my friend bought the Corton foreign tenor , for 325 pounds of eBay , however on delivery it’s great condition solid clean , no dinks crisp engraving original felts and corks all in place and tip top to be honest

However it would not play looking at it the palms key pads look dried out and one is persisted. I noticed the other pads all original not bad condition with big metal resonators.

He complained to eBay and rather than the stress of packing it and posting it would you believe rather than sending back the seller offered and refunded him 225 pounds so it’s cost him 99 pounds and a few pence.

I looked at horn it like a tank hardly been played looking at it , the question is it worth him putting money into it to no doubt will need pads and serviced , he wants to use it for busking so makes sense as it’s a robust horn.

Due to the mechanical condition is it worth putting money into to get sorted as it’s only cost him 99 quid .

Interesting I found the below video about Amati factory.
From Amati's website:

"In 2021, thanks to the uneconomical approach of the foreign owner, AMATI found itself on the verge of bankruptcy and insolvency proceedings were launched. The new owner saved AMATI and transformed it into a cooperative. At the same time, he invested over 100 million crowns in it to restore its lost prestige and world fame."


To buy a new sax that is made in Europe is important to me. Why buy from China och PRC made?
 
I'd agree that 99 quid as it stands is as much as it's worth, and as above show it to a repairer and get a quote for the most minimal 'playing condition' service, as Jon f says if just a few palm key pads etc it shouldn't be too tragic !
Interesting to see how it pans out anyway
 
Palm key pads are very easy to replace. Run a leak light down it and have a go yourself.
The problem for a person who is playing an Amati, Weltklang is to find a pad without paying too much. I used to help players with thier Amati and Weltklang ... saxes with pads, corks, felts ..... . A low priced sax must be cheap to run as well. Blues and rock playes use to give more than we take ..... .
 
The problem for a person who is playing an Amati, Weltklang is to find a pad without paying too much. I used to help players with thier Amati and Weltklang ... saxes with pads, corks, felts ..... . A low priced sax must be cheap to run as well. Blues and rock playes use to give more than we take ..... .
Ebay. Be prepared to buy a set that contains what you need and a big box for the spares. I bought a soprano set because it had several of the pads I needed for the baritone. I now am the proud owner of several very small spare pads.
 
I used to buy standard pads in boxes: 200 pad assortment, .160" (c 4,0 mm) and .185" (c 4,7 mm) thickness but I just bought pads in inches. So I don't have pads in mm, just in 32/in. I was just doing old american school/beginner saxes. Rock & Roll saxes for the guys who couldn't spend too much money on thier hobby. MM or 32/IN, I just picked a pad that fit. The I.D. of key cups on beginner-/ secondline saxes varies. I have been doing some easy/basic sax repair latley and it's fun again. I have some saxes that I'm going to put playable condition again (new pads, corks, felts ..... ): "Diamond" (Dörfler und Jörka), "SMG" (B&S), "Winneden" (Keilwerth), "Louis Robert" (Amati) ...... . All terrible junk saxes compared to ultra cheap PRC saxes. Maybe I start a new RockSax group? To make an ok beginner sax playable and sell it not so hard. To get them into RockSax is a little bit harder. A "RockSax Package" you can't resist.
 
It's funny. Most of us are with you when you write that Guban is a "rotter." I have one hanging on the wall in the woodshed. @JayeNM likes them. The saxophone world is great.
I actually DO like Arta Gubans.
After a full overhaul on a few, getting everything tightened back up and regulated, they were actually monster Tenors. Granted not the sort of horns one would go looking for, but should one fall into someone's lap for cheap, I would not dismiss them.
 
Amati are well built saxes. If I was going to buy a used sax and I could choise between a Amati (from the 70's/80's) or a modern ultra cheap Yani copy I would choice the Amati. There is more core in an Amati. A modern RPC have a more "kazoo-like" voice. Amati baritones are also great. My friend played an Amati stencil to low A from the 70's. Perfect for R&B soul, Rock .... big voice. Then he bought Yani stencil (B6) and we all missed to big low tones from the Amati.
 
Corton was a brand that had saxes made by Amati and B&S. Maybe baritone saxes as well?

I just want to point out that what is is engraved on a sax doesn't mean it's a better/more suitable sax. The Corton Deluxe saxes were made by Yangisawa. No realationship , at least not what I know, to Amati.
 
Lots of amalgamation of resources in the old Eastern block.
As far as I'm aware Cortons were made by what was left of Amati.

Earlier Amati saxophones were of a different design.

My horns were made in Czecoslovakia and stamped Lafleur imported by Boosey and Hawkes but were obviously Corton design.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,059
Messages
578,315
Members
8,127
Latest member
PJ2116
Back
Top Bottom