Saxophones Conn 10m.... Could this be the one?

[teen37]

So guys😊☺️. I ve recently discussed with some of you, possible upgrades to move on from my Arbiter Pro jazz tenor. I almost went to try out a selmer SA80I but decided against it in the end.

Now, whilst I am not in any rush to move on just yet, I think it is definitely on the cards to happen at some point over the coming months. 😉

I was very drawn to a Selmer initially, but have stumbled across some YouTube videos on the Conn 10m.

Having watched a few comparison videos on Selmer mark VI Vs Conn 10m, (not that I was looking at the Mark VI 😳) I immediately noticed how different the tone was between them. The selmer sound much cleaner, crisper, whereas the Conn was a little warmer, fluffier 😳 (is that sacrilege to use fluffy and Conn in the same sentence?.... 🤔😳🤷)
I thought it would be just that one video so I watched a few others and yeah, it was still "fluffy" ☺️ I really liked the "fluffy" sound.
Someone said it was because they were made during the Swing era and so were more "harmonic" and "softer" built for a more acoustic environment and they blended well in a section with the likes of Buescher's. In context, this made so much sense to me.
Someone commented in my last post that perhaps I didn't really know at this stage what direction I wanted to go in looking for a new/old tenor, they were correct, I didn't know. But now I think I do 💡😳🤔

So... If this is a light bulb moment could y'all please enlighten me as to your opinions and experience with the Conn 10m tenor sax.

Is there a particular year or time period that was better than others to look for?

Any faults to look out for?

Are they harder to blow because they are so old?

What's an average price these sell for?

And really any other areas I've not thought about 🤔☺️

 

[turf3]

I've been playing Conn saxophones as my preferred make since 1978.

The 10M is not any harder to play than any other tenor. They key positions are slightly different than the modern "Selmer-derived" layout.

They have a big, husky tone that is characteristic of most of the old American saxophones - Conn, Martin, and King are much in the same category.

A lot of people complain about "ergonomics" of anything that isn't the latest model Yamaha, but it takes a week or so of practicing to accustom your hands to where things are. The Conn tenors have very slick fast keywork. Some people complain a lot about where the strap ring is located; much ado about nothing.

The single biggest potential fault on Conn tenors is that some (MAYBE on the order of 10%????) have an acoustic fault where the low notes (it's worst on low D) have an incurable tendency to "warble" or fluctuate between two nearby frequencies. This can make it very difficult to play softly in that range. This is NOT due to an undiagnosed leak, and while mouthpiece choice can make the tendency worse or better, it's not because of your mouthpiece, nor is it because of "how you blow". It is some kind of manufacturing/design defect. You simply need to test the horn in question, blowing some soft low Ds, to find out. The horns that don't have this issue, don't have it.

Unlike the Conn baritone, the Conn tenor seems pretty adaptable to a variety of mouthpiece design types. I've used everything from a Dukoff to a Selmer C* on mine. Intonation is excellent.

The single biggest thing to consider is condition of the individual horn. The newest 10M is more than 50 years old now; and all during the 1960s 70s and 80s these were considered (incorrectly) as crappy student horns, so a large number of them have been marched in the rain, generally abused, and given the absolute minimum of maintenance and care. Very many of the oldest silver plated horns were sanded down to brass and polished when silver plating went out of fashion.

Prices tend to be highest for pre-war horns with rolled tone holes; then postwar with RTH; then late 40s/early 50s with straight tone holes, then declining from there. I've had both straight and rolled tone holes on my Conns and can't tell a bit of difference in the playing. In the 1950s they fiddled around with the design of the octave key on the neck, which doesn't mean anything; at some point in the 50s they went to nickel plated keys, which devalue the horn but have no functional effect; and sometime in the early 60s (??) they rejiggered the octave mechanism, locating the key on the underside of the neck, for no known reason. I suppose one MIGHT be able to sense the tiniest difference in how the machinery feels, but I rather doubt it.

 

[turf3]

As for when these horns were designed, the basic Selmer tonal concept really comes from the Balanced Action, 1936, which means design work was underway a couple years before that, right at the height of the big band swing era. The Conn tenor acoustic design, I believe, probably dates back to the mid 1920s. Buescher had three different acoustic design generations - the True Tones from the 20s, the Aristocrat from the 30s, and the 400 from the 40s. A great deal has been written and pontificated about how such and such a horn was designed for such and such an application, but unless you have a copy of the actual design brief from the factory in which the tonal design goals for the product were stated, I'd treat all such statements with a block of salt.

 

[teen37]

As for when these horns were designed, the basic Selmer tonal concept really comes from the Balanced Action, 1936, which means design work was underway a couple years before that, right at the height of the big band swing era. The Conn tenor acoustic design, I believe, probably dates back to the mid 1920s. Buescher had three different acoustic design generations - the True Tones from the 20s, the Aristocrat from the 30s, and the 400 from the 40s. A great deal has been written and pontificated about how such and such a horn was designed for such and such an application, but unless you have a copy of the actual design brief from the factory in which the tonal design goals for the product were stated, I'd treat all such statements with a block of salt.

That's a whole load of info, thank you ☺️👍
With regards to the "such & such designed for such & such an application" the guy I was listening to was speaking from his experience having owned minimum of 4 Conns and minimum of 4 Mark VI 's. He had played in sax sections with either/or in and he said there was a definite lack of a certain sound in that swing era music that the Mark VI' s lacked. 🤷
I could hear the difference between the two horns myself and so would have to agree with him in his observation.

 

[turf3]

That's a whole load of info, thank you ☺️👍
With regards to the "such & such designed for such & such an application" the guy I was listening to was speaking from his experience having owned minimum of 4 Conns and minimum of 4 Mark VI 's. He had played in sax sections with either/or in and he said there was a definite lack of a certain sound in that swing era music that the Mark VI' s lacked. 🤷
I could hear the difference between the two horns myself and so would have to agree with him in his observation.

Well, if you compare the sound of a saxophone section from 1935 full of Conns, certainly that's the sound you'll associate with the sound of a saxophone section from 1935 full of Conns. That doesn't mean that Conn set out to design in 1920 a horn that would give people in 2020 a sound they associate with a sax section in 1935.

If I put a clarinet section full of Oehlert and Albert players next to a clarinet section full fo Boehm players, they'll sound different, too.

Now if you take the Count Basie sax section of 1935 and the Basie section of 1975, they'll sound quite different, but there was a lot more that changed than just the make of the horns.

 

[turf3]

At any rate, what you need to do is to try some of them. Conns ARE different than Selmers or Selmer-inspired horns. Personally I prefer them.

 

[Stephen Howard]

Time for some counter-perspective then.

Yep, the Conn 6M/10M horns are still popular today. To put that into perspective they rank, at least in terms of what turns up on the workbench in the 'pro horn' category, 4th...after Yamaha/Yanagisawa/Selmer.
Lots of players still using them.
But...not so many working pros. Mostly enthusiasts. Plenty of pro players who express 'an affection' for the M series Conns - but who nonetheless find that modern horns cut the mustard as far as they're concerned.

Chasing a particular sound by chasing a particular horn seldom works out well. It's essentially the last link in the chain - so proceed with caution.

The M series horns are well-built, but their inbuilt foibles require competent servicing, over and above that required for a modern horn. It's not cheap - and if I had a quid for every Conn I'd seen where these fundamentals had been missed I'd be sitting on a rather well-stacked wine cellar.
Did a 6M (transitional) service this week. Can you believe that the last tech that worked on it fitted pads that were at least 1mm too small in diameter?? Yeah, I know, right?? On a tranny Conn!! And they thought that the locking grub screws on the point would actually work. Bless.
I know that means nowt to you - but the client is £350 down on what should have been a £140 service because of those mistakes. Fair do's - get those issues sorted and they won't be recurring problems (point screws aside...that Loctite doesn't last forever) - but unless you know the M series inside out, these are costs that might land on your doorstep from day one.

I disagree with the statement that "the basic Selmer tonal concept really comes from the Balanced Action, 1936" because I'm not a fan of the modern Selmer soundscape...but I do rather like the sound of a good BA/SBA. It's very different to the MkVI and beyond.

And if you're going to go down the rabbit-hole of vintage horns in search of THAT tone, then a Martin should be top of your list. Same old 'vintage' quirks and issues - but (from a purely personal perspective) they kick a Conn into a corner...and then pour its beer over its head. And that's coming from someone who CAN tell the tonal difference between a Yamaha/Yanagisawa/SA80 Selmer.
And there are plenty of other fish in the sea, for less dosh.

If you decide to get your act together and bring your Arbiter in for a shakedown, I'll bring my TJ RAW tenor in - and then you'll get a chance to hear what at really well-balanced modern horn sounds like. And feels like - so bring your mouthpiece.

 

[teen37]

Time for some counter-perspective then.

Yep, the Conn 6M/10M horns are still popular today. To put that into perspective they rank, at least in terms of what turns up on the workbench in the 'pro horn' category, 4th...after Yamaha/Yanagisawa/Selmer.
Lots of players still using them.
But...not so many working pros. Mostly enthusiasts. Plenty of pro players who express 'an affection' for the M series Conns - but who nonetheless find that modern horns cut the mustard as far as they're concerned.

Chasing a particular sound by chasing a particular horn seldom works out well. It's essentially the last link in the chain - so proceed with caution.

The M series horns are well-built, but their inbuilt foibles require competent servicing, over and above that required for a modern horn. It's not cheap - and if I had a quid for every Conn I'd seen where these fundamentals had been missed I'd be sitting on a rather well-stacked wine cellar.
Did a 6M (transitional) service this week. Can you believe that the last tech that worked on it fitted pads that were at least 1mm too small in diameter?? Yeah, I know, right?? On a tranny Conn!! And they thought that the locking grub screws on the point would actually work. Bless.
I know that means nowt to you - but the client is £350 down on what should have been a £140 service because of those mistakes. Fair do's - get those issues sorted and they won't be recurring problems (point screws aside...that Loctite doesn't last forever) - but unless you know the M series inside out, these are costs that might land on your doorstep from day one.

I disagree with the statement that "the basic Selmer tonal concept really comes from the Balanced Action, 1936" because I'm not a fan of the modern Selmer soundscape...but I do rather like the sound of a good BA/SBA. It's very different to the MkVI and beyond.

And if you're going to go down the rabbit-hole of vintage horns in search of THAT tone, then a Martin should be top of your list. Same old 'vintage' quirks and issues - but (from a purely personal perspective) they kick a Conn into a corner...and then pour its beer over its head. And that's coming from someone who CAN tell the tonal difference between a Yamaha/Yanagisawa/SA80 Selmer.
And there are plenty of other fish in the sea, for less dosh.

If you decide to get your act together and bring your Arbiter in for a shakedown, I'll bring my TJ RAW tenor in - and then you'll get a chance to hear what at really well-balanced modern horn sounds like. And feels like - so bring your mouthpiece.

Oh Stephen.... (Big sigh here)...... I'm Soooo not worthy 🙌🙌🙌

Thanks for the perspective ☺️
I was lured in by the beautiful sounds I was hearing 🤔🤷😉

Yes I'll bring my mouthpiece 😉🤗

 

[turf3]

For me, I'd put Conn, King, Martin and Buescher tonally aside from Selmers. (to me, Conn and Martin are closer to each other and Buescher seems a bit different. It's been so long since I played a King that I can't characterize it tonally.

Conns ARE, mechanically, a bit "string and sealing wax". Martins and Bueschers are fine machinery, and it's been too long since I had a screwdriver on a King for me to say.

I agree with Stephen that chasing tone by chasing horns is probably not the fastest most straightahead path to getting yourself playing comfortably and rebuilding your chops - I suspect that path goes through the horn you already own.

 

[Colin the Bear]

A great player sounds great. A great player who is a salesman, sounds great on what he's selling.

You're not a great player yet. You won't sound great on anything yet.

You're buying a conical tube, not a recording of a player who sounds great. You can't buy your sound. You have to earn it.

No matter the horn, I sound like me. You will sound like you.

Get your Arbiter fixed and put some hours in. You've had an offer from a top of the line tech. It'll play great when you get it back.

10m? Do you really need an antique collectors item to learn on? Would you buy a model T to learn to drive? Not the same I know, but... 🙄

 

[Tuppertn]

I agree with Stephen that chasing tone by chasing horns is probably not the fastest most straightahead path to getting yourself playing comfortably and rebuilding your chops...

No, but it nets you a nice collection of horns over the years.

The most desirable (pre_war/RTH) Artist series Conns will often command utterly unreasonable prices. All of us have seen dealers asking upwards of £4000 for these horns in original lacquer. That's just nuts. I mean, they're cool, but c'mon.

Not that @Stephen Howard needs a second, but I second his above comments regarding Martin. The craftsmanship is absolutely top-notch. They were so confident in their product that every new horn came with a 50 year guarantee. Of course, if you find a manufacturing defect on your Martin in 2026 you're out of luck...but you won't. The only thing that sucks on a Martin is the lacquer.

 

[Pete Effamy]

Sorry @teen37, I don’t know if you gig or you play for kicks at home. If you gig, this might have a say in what you go after.

Us non - name players get booked for any type of job, so you need a setup that allows you to be flexible in your sound. Sanborn and Brecker were never top of the list when a Glenn Miller band was being put together, or a tribute to some West Coast style player.

Through technique you can dial up your sound to a pop / smooth genre or dial it back to an old school Miller thing etc. Mostly. If it was a dedicated Miller band then I’m sure the guys would not be playing on a Mk 6 or later, more likely the vintage American horns with some kind of mouthpiece that goes hand in glove.

It’s not the whole story at all, but somewhere down the line it becomes relevant. It’s surprising just how much vibrato style / useage impacts a sound - more than the horn really.

My mate used to play in a 20’s band years ago with Tim Garland. He said that he’d be practicing frantically in a corner in between sets as the music “screwed his sound up”.

So, us mere mortals do need to be sound Chameleons if you want to get out and about and if so; I think that needs to inform your choice.

 

[Saxlicker]

There is no Martin or Yamaha in this equation (or TJ Raw for that matter).
But for what these video's are worth you are getting 3 small differences and a Selmer v Conn.
Still each Selmer and Each Conn will be different. Yanagisawa will be more consistent.
While we are not splitting hairs, Ergo's and condition along with your mouthpiece will outweigh tonal differences more than anything else when you are playing making tone quite a small thing IMO.
Headhones or Earphones will make a difference to your listening experience of this video too.
Jim is quite clever at having a bt of a push towards new horns as a salesman but in general very fair.

View: https://youtu.be/QA76KnBz6D0?si=dIc_zGPheI-DJO20

 

[teen37]

Sorry @teen37, I don’t know if you gig or you play for kicks at home. If you gig, this might have a say in what you go after.

Us non - name players get booked for any type of job, so you need a setup that allows you to be flexible in your sound. Sanborn and Brecker were never top of the list when a Glenn Miller band was being put together, or a tribute to some West Coast style player.

Through technique you can dial up your sound to a pop / smooth genre or dial it back to an old school Miller thing etc. Mostly. If it was a dedicated Miller band then I’m sure the guys would not be playing on a Mk 6 or later, more likely the vintage American horns with some kind of mouthpiece that goes hand in glove.

It’s not the whole story at all, but somewhere down the line it becomes relevant. It’s surprising just how much vibrato style / useage impacts a sound - more than the horn really.

My mate used to play in a 20’s band years ago with Tim Garland. He said that he’d be practicing frantically in a corner in between sets as the music “screwed his sound up”.

So, us mere mortals do need to be sound Chameleons if you want to get out and about and if so; I think that needs to inform your choice.

Thanks Pete, I haven't played a gig for some years and it was reggae style music the band played, which was way out of my comfort zone, not really my style at all and you are totally right about having a struggle to fit "our sound" to certain types of music. My style didn't fit reggae at all so I struggled with the whole set but got through it tolerable OK 🤷
I realise my playing ability needs to improve and I'm working on that, I have gotten a little rusty for sure. And I also realise that any horn is only as good as the player, but I'm also hearing differences in how these horns sound and recognising what sound I prefer to hear myself. I also realise this can change with moupiece and reed choice.

At the moment I'm playing for myself at home but I am trying to wiggle my way in to a couple of bands just to try and keep me on my toes, although I'm not overly keen on the genre of music they play tbh. Maybe I'll start my own band/ practice group 🤔🤷

Anyway, guys, I apologise,.... I feel with my curiosity about certain horns I've opened a can of worms here. Not my intention at all, just voicing my thoughts/questions out loud is all.

I appreciate all your thoughts and advice/experience here 🙏