Stephen Howard
Well-Known Member
Brass - aka various shades of yellow(ish).What color is the metal under that layer of dust, grime and cobwebs? 😂
Brass - aka various shades of yellow(ish).What color is the metal under that layer of dust, grime and cobwebs? 😂
Well someone I knew round about 25 years ago took a packet of wire wool to his MKVI hoping it would make him sound like Branford Marsalis.succumbed, disassembled my Mark VI, stuck it in a giant pot of boilng water, and removed all the lacquer.
I can’t say I regret it, but I’ll never do anything like that again.
Well, no. Because they use some sort of patina chemical to darken it. It's only brass coloured where the patina finish has worn off. It's the finish that is particularly the problem.Brass - aka various shades of yellow(ish).
Once the verdigis has formed the finish has gone. It's just a top layer (which can wear off) which is easily removed. The XS model is the same horn - after someone's taken the ol' wire wool to it.Well, no. Because they use some sort of patina chemical to darken it. It's only brass coloured where the patina finish has worn off. It's the finish that is particularly the problem.
I've managed to wash the keys - one at a time, drying with a towel straight after. Then tackling remaining calcium carbonate with some meths rubbed on. Tried isopropyl alcohol too. Both a bit slow.
Tried the old lemon juice mix which works well but a bit ran and caused a streak on the body. You have to be very slow and steady with just a little on a cloth. And yes, it does seem to discolour certain areas. So it's just a pain in the backside to deal with.
It is a wax finish on the RAW.Because they use some sort of patina chemical to darken it.
I remember many years back I played a P.Mauriat unlacquered, I think it was something like a 66 UL. I really liked and asked if I could get a custom one but have it lacquered. It would have been a lacquered unlacquered tenor.Just to make it clear, I don't buy into the unlacquered finishing making a difference to the sound,
I had one of the early P Mauriat system 76's with that fake vintage look, the horn played well but I never really liked that finish.I remember many years back I played a P.Mauriat unlacquered, I think it was something like a 66 UL. I really liked and asked if I could get a custom one but have it lacquered. It would have been a lacquered unlacquered tenor.
From what I remember this one was not a fake vintage look, just unlaquered. I don't like the fake vintage look either.I had one of the early P Mauriat system 76's with that fake vintage look, the horn played well but I never really liked that finish.
I doubt it's a wax finish in the traditional sense, otherwise it'd come off with the application of heat or a suitable solvent. It's possible that a wax finish is applied which contains a patination chemical, but that seems a bit unlikely.The 'RAW' model is enriched by a wax finish applied to both the body and mechanism, enhancing the inherent charm of the raw material with an instant aged appearance.
You would have more knowledge regarding this than me Stephen, the quote was from their website and if I remember right I was told the same from the shop I bought mine from, in all probability I would have bought the XS version had it have been available at the time, but have no regrets its a great horn and still love mine 13 years on.I doubt it's a wax finish in the traditional sense, otherwise it'd come off with the application of heat or a suitable solvent. It's possible that a wax finish is applied which contains a patination chemical, but that seems a bit unlikely.
I suspect it might be a case of something being lost in translation.You would have more knowledge regarding this than me Stephen, the quote was from their website and if I remember right I was told the same from the shop I bought mine from, in all probability I would have bought the XS version had it have been available at the time, but have no regrets its a great horn and still love mine 13 years on.
I may be imagining it but I very vaguely recall something about TJ saying that some MKVI owners finding the tuning different, ie the Raw was bang in tune and as they'd been compensating on their MKVI that TJ tech (Dave Farley?) did some kind of custom fettling.Aftermarket add-on?
I guess that's a possibility. I can't say I've ever noticed a tuning problem on the top F myself.I may be imagining it but I very vaguely recall something about TJ saying that some MKVI owners finding the tuning different, ie the Raw was bang in tune and as they'd been compensating on their MKVI that TJ tech (Dave Farley?) did some kind of custom fettling.
No it’s the MKVI that has the tuning problem hence the idea of a mod to make it like the MKVI for players used to it like that. I can’t imagine I would have made that up but I know it sounds far fetched.I guess that's a possibility. I can't say I've ever noticed a tuning problem on the top F myself.
It's not an unreasonable assumption. There are horns out there that I struggle to play in tune, though plenty of other players don't. I guess it's what you get used to.No it’s the MKVI that has the tuning problem hence the idea of a mod to make it like the MKVI for players used to it like that. I can’t imagine I would have made that up but I know it sounds far fetched.
Don't fight it... my 12 year old RAW looks like this, plays pretty well tho. You can't win with this, just enjoy how it soundsI hate working on these modern 'bare brass' finishes. Typically they have some kind of patina chemical to darken the brass. If you wash the sax this can dissolve the chemical a bit and if you have any drips or runs this can result in marks or streaks forming.
Also the bare metal often gets hard green deposits I'm guessing is calcium carbonate and/ or verdi gris. If you use anything too aggressive it can remove the patina finish too.
Has anyone found any effective method of cleaning these things without causing more problems?
The current victim on the bench is a Trevor James Raw.
View attachment 26817View attachment 26818
