Oops I wrote "students of wine", I never drove my student to alcholism, I swear!
Wine - Page 52 - CafeSaxophone ForumAdmit it, you were thinking of Jeanette.

Jx
Oops I wrote "students of wine", I never drove my student to alcholism, I swear!
Wine - Page 52 - CafeSaxophone ForumAdmit it, you were thinking of Jeanette.

I have two almost identical 1945-46 silver-plated 12Ms. One of them has a modification on it with a plate to attach the G# to the C# and B. I recently went back to this baritone from the other (which is currently having the neck loop braces resoldered because they came loose). I find the C# and B extremely heavy because of the extra spring from the G#, but the G# *on its own* should not be too heavy.. You could have the two opposing springs on the G# mechanism adjusted but that's probably looking for trouble if it's done badly.Thanks. One more question, maybe for @fabriziodalisera or @turf3 or anyone who plays a Conn 12M. View attachment 25452One key I had real problems with was the left-hand pinky G# key - I found it really heavy and almost impossible play without re-adjusting the angle of my whole hand. My tech 'unattached' the key from the B/Bb cluster by bending back the little piece of of metal under the key so it plays independently. It's now very free and easy to play, but of course I've lost the convenience of holding down the key when playing from G# to B/Bb. Is it just a case of doing some weight-lifting with my LH pinky until it's Schwarzenegger-like? Or can that cluster be made light(ish) and responsive?
They gave me baritone charts with several low A tones to play on my bari to low Bb. And also on tenor. It's tricky when bandleaders don't know so much horns. I think we should blame some of the mistakes to computers and synths.
Please see my post above about how to effect the linkage to low B, C# keys, with friction reduction. Proper attention to this will make huge improvements.
I have a Holton/Couturier soprano with the combined G#/C# key and it renders a couple arpeggios very difficult to play (can't remember which).
Let's not forget Harry Carney, probably the most influential and possibly the best big band bari player ever! He may have played a little 11M towards the end (that's the low A adaptation of the 12M, but don't get any ideas!), but he was a 12M man from the time they came out.I started playing baritone sax just over a year ago, after a few decades playing clarinet and bass clarinet. I'd always had a 'thing' for the beautiful sound of the bari, and, along with turning 50, I finally made the leap because I met someone selling a 1936 Conn 12M that had belonged to a recently departed local jazz great (Gijs Hendriks, in case anyone's interested in Dutch jazz...)
At the time, I also watched some videos by Cafe Saxophone member (legend!) @fabriziodalisera and thought - Wow! That's the instrument for me!
Fast forward a year, and after some mouthpiece and reed fiddling, I've found a set-up that works for me (Aizen LS 7 and Alexander DC 2.5) and is responsive and in tune. Apart from some discomfort in my right wrist (I think because of where the thumb rest is placed), I find it pretty comfortable overall.
And I've totally fallen for bari playing... the bass clarinet is gathering dust, and I'm working on the chops necessary to get a big band spot (much harder than I naively/arrogantly thought...)
Anyway, my question is it realistic/sensible to use this as my main/only instrument? If I'd known I was going to fall so hard for bari playing, I might have thought a bit more carefully about practicalities (like Low A or no, and whether a vintage beauty like this is more suited to, well, a jazz legend, with mere mortals better sticking to a modern Yamaha, Yanagisawa etc.)
Any thoughts/advice/experience welcome. (The sound is beautiful, of course...!)
View attachment 25428
Agreed with everything except the hard to work on. The one thing that can be a bit iffy is the correct spring tension, too little and the keys won't open correctly and you'll have more than one flat note. Too much and it'll turn into an exercise machine.Let's not forget Harry Carney, probably the most influential and possibly the best big band bari player ever! He may have played a little 11M towards the end (that's the low A adaptation of the 12M, but don't get any ideas!), but he was a 12M man from the time they came out.
A '36 is a great horn, with two caveats: one, it will have gone on and out of adjustment a hundred times in 88 years, and through the hands of many techs, and it's a challenging model to work on, so if you haven't already, have a trusted tech go through it meticulously. Baris are more forgiving of leaks than smaller saxes, but they're also easier to knock into things, so you could be surprised at how much a servicing will improve it. Second caveat, and a small one for most players, is that a '36 will probably not have a front high F lever. The high notes are not really the point of the bari, but if you find you miss it, there are easy (Yamaha style lever) and hard (later Conn) ways to add one. If you find yourself almost getting gigs, but losing them because you can't get down to A, there are a surprising number of cheap but solid horns from both sides of the Taiwan Strait that will do the job, at a price that will let you keep the Conn--provided you have room for two baris, of course.
Here's a little trick that might help.Where does one buy Delrin or UHMW-PE in a form useful for saxophones?
One of the popular UK suppliers of bits and bobs for repairs and maintenance, for example, lists lots of corks and synthetic corks, but only lists PTFE, not Delrin or UHMW-PE on their website.
But a Martin shows them the door 🙂Agreed with everything except the hard to work on. The one thing that can be a bit iffy is the correct spring tension, too little and the keys won't open correctly and you'll have more than one flat note. Too much and it'll turn into an exercise machine.
But the 12M sound is the best, next to a King Zephyr
But a Martin shows them the door 🙂
