Tech/maintenance Shellac or Hot Glue for pads?

There is another variation to using flakes to make sticks of shellac. You heat the shellac to a liquid state and pour into a silicone ice mold designed to make ice for water bottles. The photos show the process. I used flakes from Ferree's and the home made sticks perform sort of the same as the more expensive pre made sticks, but I still prefer the originals since I am more familiar with them.

12916
12917
12919
12918
 
Beautiful! I'm sure you will love using them. I'm curious. Did you just fill the mold with flakes and "bake" them in the oven till melted? If so, my method was a lot more messy than that.

Not exactly. I poured some flakes into the mold and melted them using my 'Vortex Air Torch' but it was slow and didn't melt the flakes completely, so I thought I'd better put the whole thing into the oven and bake it. So I added a fair amount of flakes over the partially melted ones and let it cool for 20' at 210°C (410°F) as the mold is said to be capable of sustaining 250°C. And flakes don't need very high temperature to melt. I normally set my air torch to 200°C to heat the key cups and it's enough to melt the shellac, float the pads, etc...

I used an aluminium foil to avoid overspill as flakes just tend to fly where they like... I will probably try the oven method straight away next time. In several stages, adding flakes as required.
 
Beautiful! I'm sure you will love using them. I'm curious. Did you just fill the mold with flakes and "bake" them in the oven till melted? If so, my method was a lot more messy than that.

That's a neat idea.
Whenever I need to make sticks up from flake I faff around with a line a flakes and a gas gun - and each time I do it I think "There has to be an easier way".
And so there is,
 
I know, old thread, but...

So, on Friday I phoned Windplus. They advised which pads to buy (Premium Deluxe) for my Yamaha Vito, and I ordered them (all in stock) online.

I'm now in just this situation - other than YTS vs YAS 23 / Vito as mentioned here.

I was wondering how you got on?

WP still offer pads in 4.3mm, 3.8mm or 3.2->4.3. As I mentioned, the MM sample bag pads seemed thick compared to the old pads.

cheers
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,059
Messages
578,328
Members
8,127
Latest member
PJ2116
Back
Top Bottom