Accessories Selmer Iigature

Tidied up my garden shed and found a bag of thick heavy duty elastic bands.
I use one at the shoulder and one at the heel, sounds just as good (to me) as
my rovner dark. Next week who knows.πŸ™‚
Dale


Probably not going to do much in the short term but elastic bands can react with things and cause burns and chemical reactions on various surfaces
 
Tidied up my garden shed and found a bag of thick heavy duty elastic bands.
I use one at the shoulder and one at the heel, sounds just as good (to me) as
my rovner dark.
I think an elastic band is going to be as good as it gets, but...
Probably not going to do much in the short term but elastic bands can react with things and cause burns and chemical reactions on various surfaces
Will not be reliable.

The problem with rubber is that it can degrade very quickly with only small bits of contact from oily things.

If it happens in the middle of the best solo you've ever done (and potentially will do) in your life it's tough titty.
 
Three. Always have. Because they do.

Yes they matter. Many people think so.
That brought to mind this thread πŸ™‚

 
The general opinion was that a std 2 screw ligature was as good as other ligatures. The ligature didn't changed the tone/sound. I can agree a little bit when it comes to tone/sound. If I can't use a std 2 screw ligature on my mouthpiece I can't play!!! I still think different ligatures matters when it comes to tone/timbre and other functions. For me it's important a ligature ......

.... fit the mouthpiece
.... holds the reed on the mouthpiece in a good way
.... is adjustable so a dull/dark or a sharp/bright reed and be "tuned up and down"
.... easy to adjust when playing (one screw and the be able to mount so it easy for both right and left handed persons)
.... some mouthpieces are designed to to work with most of the stock of the reed free.

Ligatures shouldn't ,if possible, leave any scratches/marks on the mouthpiece. There are other things to consider when it comes to ligatures as well.
 
I still think different ligatures matters when it comes to tone/timbre and other functions. For me it's important a ligature ......
I agree that ligs can change tone/timbre just as embouchure. Embouchure has potentially the larger influence on tone but ligs can make a certain sound easier to play and others more difficult. For example, if you use your Wikenia lig upside down it is easier to make screaming sounds but it is generally more difficult to make dark sounds.
For an inventors game in 2014 I made a lig not described in the 40 patents on ligs at that moment, with the opposite effect.
 
Dropped the baritone ligature. Stepped back to find it. Found it with my boot and bent it. After much faffing about with pliers I couldn't get it quite right so I ordered a new one.

The new one has a slightly smaller circumference and fits much better. Maybe the old one stretched. I'll be more careful with this one. Doh!
 
Dropped the baritone ligature. Stepped back to find it. Found it with my boot and bent it. After much faffing about with pliers I couldn't get it quite right so I ordered a new one.

The new one has a slightly smaller circumference and fits much better. Maybe the old one stretched. I'll be more careful with this one. Doh!
Screenshot 2025-09-10 14.55.19.webp
 
The Selmer single screw works great on the Baritone S80 and Yam5c. It worked great on the alto soloist and yam 7c.
So...I got one for the tenor soloist. No. No good. Borrowed the Selmer two screw off the S80. Marvelous.
How annoying. 😑
When I got my tenor Soloist it didn't have a ligature so I used a Yamaha twin-screw which was fine.
Then saw a genuine Selmer Paris twin-screw in silver for Β£20 which I nabbed. It fits perfectly and contrasts with the gold Selmer Paris mpc cap, and repeats the silver keywork on the horn πŸ™‚ I have a spare Yamaha 2-screw in gold but my OCD voice said Selmer mpc should have a Selmer lig:rolleyes:

No difference in sound between them as far as I can hear.
 
When I got my tenor Soloist it didn't have a ligature so I used a Yamaha twin-screw which was fine.
Then saw a genuine Selmer Paris twin-screw in silver for Β£20 which I nabbed. It fits perfectly and contrasts with the gold Selmer Paris mpc cap, and repeats the silver keywork on the horn πŸ™‚ I have a spare Yamaha 2-screw in gold but my OCD voice said Selmer mpc should have a Selmer lig:rolleyes:

No difference in sound between them as far as I can hear.
Silver will be brighter. >:):doh::rofl:



Only joking.
 
When I got my tenor Soloist it didn't have a ligature so I used a Yamaha twin-screw which was fine.
Then saw a genuine Selmer Paris twin-screw in silver for Β£20 which I nabbed. It fits perfectly and contrasts with the gold Selmer Paris mpc cap, and repeats the silver keywork on the horn πŸ™‚ I have a spare Yamaha 2-screw in gold but my OCD voice said Selmer mpc should have a Selmer lig:rolleyes:

No difference in sound between them as far as I can hear.
My post you quoted was three years ago.

I had another look at the tenor single screw later. It needed a little adjusting to reshape it. I bought it second hand and it must have been damaged. Maybe somebody trod on it. It fits and plays great now. Fit is everything.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,294
Members
8,127
Latest member
PJ2116
Back
Top Bottom