Accessories Selmer Iigature

Update. I went for the gold lacquered finish. The lacquer has chipped or worn and there are green spots. The inside surfaces are showing signs of verdigris too. A quick pollish with autosol and everything is fine.
To save myself some hassle, I think I should have gone for the silver plate version. I didn't like the colour. Form over function. Doh!
Lesson relearned.
 
The lacquer alto ligature is a right mess now. Green and crusty on the inside and leaving marks on the mouthpiece.

I can't keep up with metal polish so will have to resort to something more abrasive.

Go silver if you fancy one. My tenor lig. is only very slightly tarnished. Pity I don't like it. 😑

Baritone is fine btw.
 
I picked up a Jupiter straight sop last week. Much better than my curvy G4m which has been an ornament for some time.
I have a S80 F and thought I'd treat it to a Selmer lig. Went for silver plate.
A noticeable improvement especially up high.

Update: I had a close look at the tenor lig that I bought used on eBay and it was deformed. I straightened it and reformed it and it plays great now.
It could have been postal damage either to me or to the original owner, which is probably why it was not liked and sold on.

So, I have Selmer mouthpieces and one screw ligs on SATB now and all is well. I highly recommend them.
Still no sign of one for clarinet. πŸ™
 
If you don't have this you're nothing.

img-3.webp
 
If we lose "power" up there it will be ten times worse down in the tube. But this is my own theory.
I've thought of it like that, just that the mouthpiece/neck area is more important than the tube and second only to the actual player

This assumes that the tube and associated bits have their integrity. So if a tube has been squashed or if all the palm keys have fallen off, no amount of expensive mouthpieces or necks will make the slightest difference.
 
It really bugs me that a lot of ligatures, even when used as designed cause damage to mouthpieces in terms of dents scratches and gouges. Some may determine this damage as purely cosmetic, and therefore inconsequential, I for one, can't get passed it.

I also think the quality of plating on mouthpieces and ligatures is incredibly varied between brands: I saw some brand-new Otto Link metal mouthpieces in a shop a few months ago that were virtually black in places where the plating layer below the gold had tarnished.

I use Rovner ligatures and all of them except one have gold coloured screw and thumb nut. the one that is plain silver coloured alloy requires more maintenance than the gold ones - the threads stop running smooth - so need cleaning and a smear of cork grease applying every 6 months or so.
 
Recently bought Rovner Platinun ligs for alto abd
I always thought so too: I am not saying there is a difference between say a gold plated one and a rhodium plated one, but between a soft "Rovner style" lig and a metal one definitely!
Recently bought Rovner Platinum ligs for my alto and tenor from Sax Co...well pleased with fit and difference to tone..I was concerned that they may not have fitted my Syos mouthpieces...but they do and I am delighted with them both.
 
Recently bought Rovner Platinum ligs for my alto and tenor from Sax Co...well pleased with fit and difference to tone.
Platinums are great, you are lucky they fit your Syos.

I have a cheap and easy hack to help these fit when the mouthpiece has a large taper. That is to use a drill to slightly increase the size of the hole the screw goes into so that there is more wiggle room. (NB: not the bit with the screw thread!)
 
I've thought of it like that, just that the mouthpiece/neck area is more important than the tube and second only to the actual player

This assumes that the tube and associated bits have their integrity. So if a tube has been squashed or if all the palm keys have fallen off, no amount of expensive mouthpieces or necks will make the slightest difference.
I think the mouthpiece, ligature, reed and the neck is important for us to play the sax. If it's efficient up there (no leaks, no or less "nooks and crannies" (skrymsle ooh vrΓ₯r, Swedish), flat table, ligature that supports the reed, no bad reed ..... that interfere the airstream. I think all this is like a carburetor. The carburetors had produced different sounds as well. Dellorto, Weber, Holley .... needed more less air to work. The player use to support the carburetor/mouthpiece with air. The sax body is like an engine dealing with power and the bow and bell is the exhaust.

I think the ultimate sax was/is Martin Home model. Keyed from C1 to C3. No leaking palm keys, and no key leafs, no bell keys ...... . A sax that probably would make sax players to play better. You could play overtones and D3, Eb/D#3, F3 on a Home Model as well. But I would miss Jr Walker's low Bb overtones on his Bb tenor in the sax key of Bb/A# ... perfect for the Bb tenor sax,. But we can transpose songs to fit C tenors as well.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,292
Members
8,127
Latest member
PJ2116
Back
Top Bottom