- Messages
- 810
- Location
- London
I’ve been meaning to post about my return to Roberto Buttus’ workshop in Friuli, Italy ever since I visited in November. @aldevis and I travelled together and spent much time playing the new saxes there, comparing necks and mouthpieces – a great trip! Roberto was his usual generous and hospitable self, and it was great to see the people at his workshop again, particularly Cristina the workshop manager and Nino the machinist. The last time I was there was in 2016 when I bought my current saxes and I am pleased to report that the genuine kindness and warmth of the Buttus crew was the same as ever.
My reasons for visiting were of course partly social, but also to check out the new versions of the Sequoia horns. He and his team have been working hard on the new instruments: I demonstrated the new RB1 Alto at Howarth’s last summer along with the original Sequoia Soprano and Tenor, but now the RB2 Alto is also entering production and a prototype RB1 Tenor was there for Aldevis and me to play.
The RB series has some very interesting improvements from the original Sequoia instruments. I consider the earlier instruments to be very finely made conventional saxes; the RBs however are an innovation. Visually, the two changes that really stand out on the RBs are the neck tenon mechanism and the body to bow joint – two historically problematic junctions on the saxophone. I wish I had taken pictures of them which might have been easier to understand!
The conventional neck tenon mechanism works by laterally compressing what is hopefully a well machined tenon into the receiver by tightening a screw. Roberto’s new mechanism works by means of a threaded circular ferrule around the tenon that compresses the neck onto the body vertically by means of a complimentary thread on the receiver. It took me a little while to get used to locking the ferrule down correctly, but once understood, the mechanism and the thought behind it seemed patently excellent. The bow joint works similarly, and rather than the usual collar with lateral tightening screws, two rings tightened by vertical screws achieve a compression of the body to the bow. Both these innovative mechanisms are extremely light-weight and I hardly noticed any difference in weight between my original Alto and the RBs, or between the original Tenor and the prototype RB tenor.
The difference between the RB1 and RB2 Altos is one of bore dimensions. Simply put, the RB1 (which I prefer) is loosely similar in intonation curve to the Selmer Series 2 Alto, and the RB2 is closer to the Series 3. (I must come clean and say that despite quite liking the Selmer Series 3 Soprano and Tenor, I have always hated the Series 3 Alto and do not understand it’s tuning curve at all, although some excellent classical players sound good on it).
Subjectively, the experience of playing the new RB instruments is one of greatly increased clarity and evenness: of a strong unified voice throughout, without ever becoming over-focused (which would be my criticism of some modern instruments). I like to approach playing wind instruments in a way that is open, connected, and involves as little messing around as possible – the feeling that the air leaves the body unhindered and that the embouchure is merely a visible extension of the diaphragm, surrounding the mouthpiece and reed optimally and allowing the breath to do its best job. Of course this takes time to achieve to any level, but the RB1 instruments get me closer to this ideal than I have before experienced.
Objectively – i.e. at a physical distance - when listening to Aldevis play both the RB tenor and the original Sequoia, there is an evenness to the instrument is that is very apparent and a luminosity to the sound of the RB which is unique and the result of superb attention to detail.
There are also many changes to the materials and methods of construction Roberto uses that I didn’t really take on board so I cannot comment on them - I’m more inclined to comment on the playability of an instrument.
I helped to demonstrate Roberto’s instruments at Howarth last summer, and I am pleased to report that the ‘RB1’ Alto is now stocked at Howarth along with the standard Soprano and Tenor. I encourage anyone to go along and try these saxes, they are excellent and priced very favourably – in fact I believe they are under-priced for what they are and are a very good deal indeed.
I hasten to add that I paid for my Sequoia instruments and beyond some excellent food and wine, I paid for my recent trip to Italy myself. Although I endorse Roberto’s instruments wholeheartedly, I play them out of choice and I am writing this without renumeration.
My reasons for visiting were of course partly social, but also to check out the new versions of the Sequoia horns. He and his team have been working hard on the new instruments: I demonstrated the new RB1 Alto at Howarth’s last summer along with the original Sequoia Soprano and Tenor, but now the RB2 Alto is also entering production and a prototype RB1 Tenor was there for Aldevis and me to play.
The RB series has some very interesting improvements from the original Sequoia instruments. I consider the earlier instruments to be very finely made conventional saxes; the RBs however are an innovation. Visually, the two changes that really stand out on the RBs are the neck tenon mechanism and the body to bow joint – two historically problematic junctions on the saxophone. I wish I had taken pictures of them which might have been easier to understand!
The conventional neck tenon mechanism works by laterally compressing what is hopefully a well machined tenon into the receiver by tightening a screw. Roberto’s new mechanism works by means of a threaded circular ferrule around the tenon that compresses the neck onto the body vertically by means of a complimentary thread on the receiver. It took me a little while to get used to locking the ferrule down correctly, but once understood, the mechanism and the thought behind it seemed patently excellent. The bow joint works similarly, and rather than the usual collar with lateral tightening screws, two rings tightened by vertical screws achieve a compression of the body to the bow. Both these innovative mechanisms are extremely light-weight and I hardly noticed any difference in weight between my original Alto and the RBs, or between the original Tenor and the prototype RB tenor.
The difference between the RB1 and RB2 Altos is one of bore dimensions. Simply put, the RB1 (which I prefer) is loosely similar in intonation curve to the Selmer Series 2 Alto, and the RB2 is closer to the Series 3. (I must come clean and say that despite quite liking the Selmer Series 3 Soprano and Tenor, I have always hated the Series 3 Alto and do not understand it’s tuning curve at all, although some excellent classical players sound good on it).
Subjectively, the experience of playing the new RB instruments is one of greatly increased clarity and evenness: of a strong unified voice throughout, without ever becoming over-focused (which would be my criticism of some modern instruments). I like to approach playing wind instruments in a way that is open, connected, and involves as little messing around as possible – the feeling that the air leaves the body unhindered and that the embouchure is merely a visible extension of the diaphragm, surrounding the mouthpiece and reed optimally and allowing the breath to do its best job. Of course this takes time to achieve to any level, but the RB1 instruments get me closer to this ideal than I have before experienced.
Objectively – i.e. at a physical distance - when listening to Aldevis play both the RB tenor and the original Sequoia, there is an evenness to the instrument is that is very apparent and a luminosity to the sound of the RB which is unique and the result of superb attention to detail.
There are also many changes to the materials and methods of construction Roberto uses that I didn’t really take on board so I cannot comment on them - I’m more inclined to comment on the playability of an instrument.
I helped to demonstrate Roberto’s instruments at Howarth last summer, and I am pleased to report that the ‘RB1’ Alto is now stocked at Howarth along with the standard Soprano and Tenor. I encourage anyone to go along and try these saxes, they are excellent and priced very favourably – in fact I believe they are under-priced for what they are and are a very good deal indeed.
I hasten to add that I paid for my Sequoia instruments and beyond some excellent food and wine, I paid for my recent trip to Italy myself. Although I endorse Roberto’s instruments wholeheartedly, I play them out of choice and I am writing this without renumeration.
