Jazz Is All
Member
- Messages
- 861
- Location
- Barcelona, Spain
Many moons ago when I first got my Buescher TT 4, I read a post on SOTW (of which I was a member for many years) by Bruce Bailey about reducing the diameter of the pips on those horns to improve their intonation up top. Bruce, if you don't know him, is a flute maker, tech, and seller who lives in Florida and knows a lot about True Tones. The method was quite simple to carry out and involves simply inserting a short piece of hollow plastic cut from either a Q-tip or a ballpoint pen cartridge into both pips. That reduces their inner diameter and improves the intonation of the sax. I did that, and Voilà, it worked and I have enjoyed the improved sound of that sax ever since then.
So just a week ago I wondered if that would help out the intonation on my Comm III because let's face it, it isn't even all the way up and down any more than any vintage horn is or can be. So I found some appropriate sized ballpoint pen cartridges with not much ink in the upper part and cut that off. Then I slipped one into the Neck pip and played it. Wow, it improved immediately but when I went to do the same in the body pip I had a hard time doing it from the top of the open tenon end. A combination of poor eyesight lack of light, shadows caused by my hand holding the plastic piece in the tweezers and the piece not going in straight and falling into the bell. I left it for another day.
Yesterday was the day and I decided the best way was to remove that octave key mechanism entirely and put the plastic piece in from the outside. Easy as pie, and it also gave me a chance to oil the rod inside the tube, and now I have my tenor with much more even intonation and putting out altissimo much more easily.
I wonder if anyone else has done this on a 1940s horn too.
So just a week ago I wondered if that would help out the intonation on my Comm III because let's face it, it isn't even all the way up and down any more than any vintage horn is or can be. So I found some appropriate sized ballpoint pen cartridges with not much ink in the upper part and cut that off. Then I slipped one into the Neck pip and played it. Wow, it improved immediately but when I went to do the same in the body pip I had a hard time doing it from the top of the open tenon end. A combination of poor eyesight lack of light, shadows caused by my hand holding the plastic piece in the tweezers and the piece not going in straight and falling into the bell. I left it for another day.
Yesterday was the day and I decided the best way was to remove that octave key mechanism entirely and put the plastic piece in from the outside. Easy as pie, and it also gave me a chance to oil the rod inside the tube, and now I have my tenor with much more even intonation and putting out altissimo much more easily.
I wonder if anyone else has done this on a 1940s horn too.
