Tech/maintenance Recommended glue for pearls?

I'm not sure what you mean; but for a pearl that needs refixing, I'd use ordinary clear hardware store epoxy. It's a low stress joint but the parts are not precisely matched - so you need something that fills gaps well.
“Poxy” = “rubbish” in colloquial English. “ePoxy” = joke I.e putting an e in front of Poxy means something rubbish bought online (or iPoxy something rubbish from Apple)
 
We wrap some masking tape around the cap and tube of the Super Glues, as it helps with longivity.

JB Clear Weld #50114-H can be used to glue a rear view mirror's metal tab to the glass.
Devcon 5 minute epoxy was popular for gluing pearl inlays into fretboards long ago.
I use West System's G/5 now for lotsa stuff.

Surface prep is essential as is temperature.
Epoxy will soften and parts can be removed with heat carefully applied.
IMG_2491.jpeg
 
Working with carbon fiber cloth, impregnated with epoxy, was being tried for rudder posts back in the last half of the '70s. Sadly the arrogant young Naval Architects, did not listen to those who knew better, and the Fastnet Race of '79, was the result. Snapped like matchsticks when a WAVE backed the boats up.
 
'I used clear bathroom silicon glue for glas or plastic "pearls".'

There are thinner formulations of silicone designed to be used as a
'dissimilar surfaces' adhesive. I find the version used on glass to work
very well for the key touches, too.

t
yes, I'm sure it affects the 'feel' but maybe not 'the sound!'
 
I don't know if it's real mother of pearl. It's pretty but I rather doubt it. And it seems to be backed with something.
It's most likely a thin layer of abalone glued to a blue sheet of plastic. These are readily available on Amazon ($8.-) for a whole set or Alibaba (50 cents for the same product). The "eye-shape", i.e. elliptical pieces are part of the standard sets:


I have used contact cement for those in the past if you need to replace them, just heat them up gently and they will come right off again.
 
No glue install. This thread helped. Thanks @thomsax !
The pearl was already out. I ever so slightly expanded the edge. Dropped in a new 10mm pearl and rolled the edge over. I used a steel tube beveled to the inside and rolled the edge back over. The sides of the pearl were not straight wall. It had a slight taper.
1718818843530.webp

1718818941972.webp
 
Cool thread indeed. I’m the happy owner of a YSS-475, not always fan of it’s « stick-slip » synthetic buttons.
Anyone here has experience taking them off, to replace them with real mop buttons, or something more exotic ?
 
Last edited:
Cool thread indeed. I’m the happy owner of a YSS-475, not always fan of it’s « stick-slip » synthetic buttons.
Anyone here has experience taking them off, to replace them with real mop buttons, or something more exotic ?
Just scuff them up with some coarse grade sand paper. Makes them a lot less slippy.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,508
Members
8,131
Latest member
Jef B
Back
Top Bottom