Mouthpieces Otto link mouthpiece biteplate

eb424

Well-Known Member
Messages
4,216
Location
london
I bought a metal link a while ago and really like it.. it had a bitemark on the patch. I'm having trouble now getting a patch to stay on. I think i put a bit of pressure on the same place the front lifts saliva gets underneath and the patch falls of. I have had a bit of success levelling it out with contact adhesive and sticking a patch on. But im not sure if its healthy tho im not eating it. Its a bit spongy and rides the dent. Is there anywhere in the uk that can fix the original patch..
 
Take the patch off and clean the bite plate with alcohol. Then put a new patch on.

If the bite plate itself has a dent, then Pete's advice is excellent 🙂 Or use epoxy rather than contact cement to fill the dent. JB Weld is good for this, as it is a dark color, though not black. But the best solution is to have someone with the proper equipment and materials (like Mr. Pillinger) replace it.

FWIW I prefer a harder patch, and I use UHMW tape which I cut to fit; the acrylic adhesive in this stuff is excellent and doesn't give out. My patches stay in place and remain useful for months at a time.
 
Maybe something you can do yourself?

 
Maybe something you can do yourself?

Hi thanks @thomsax..mines the metale aemp. version but the principle will be the same i guess..its annoying i must be putting pressure on the dent and the frobts lifting. Patch lasted 45 mins yesterday..grr had to cut practice shirt after persisting for an hour and a half. I have 2 fetes to do in July so against advice ( have done it before) ill use contact adhesive temporarily..then hopefully Ed can sort it.
 
I noticed on the "Dolly" recording that your mouthpiece/sax is hanging a little bit low. Adjust the strap/harness and try to hold the sax more in the front of you so the mouthpiece goes straight into your mouth (too many advice kills the joy of playing)? I made a teeth protection out of a teeth guard that hockey players use. It's helps and I can also color it so it looks like a front teeth is missing, playing with spinach or snus on my teeth 😉
 
Take the patch off and clean the bite plate with alcohol. Then put a new patch on.

If the bite plate itself has a dent, then Pete's advice is excellent 🙂 Or use epoxy rather than contact cement to fill the dent. JB Weld is good for this, as it is a dark color, though not black. .

Agree with this, although personally I use JB Waterweld as its certified food safe. Just feel a bit more reassuring for something that'll be in the mouth for a period of time.
 
Last edited:
I bought a metal link a while ago and really like it.. it had a bitemark on the patch. I'm having trouble now getting a patch to stay on. I think i put a bit of pressure on the same place the front lifts saliva gets underneath and the patch falls of. I have had a bit of success levelling it out with contact adhesive and sticking a patch on. But im not sure if its healthy tho im not eating it. Its a bit spongy and rides the dent. Is there anywhere in the uk that can fix the original patch..
Do you actually mean the patch, I presume you mean the BITE PLATE has a tooth mark on it?
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,317
Members
8,127
Latest member
PJ2116
Back
Top Bottom