Used to a be a shop in Ealing West London that sold these as student saxes.Who made the MW saxes?
thesaxshack.co.uk
I've played worse than that......
These things are great, I have one. They're also useful for all sorts of other things where a controllable localised heat source is required. Subject to the usual cautions about risk of fire and explosions, they're great for freeing up seized bolts on motorbikes and the like.You’re very welcome. Always glad to help out anyway I can. I sort my workbench weekly. Good luck !
if you don’t already on a micro torch you’re going to need a heat source. These hot air units work really well. Lowers the chance of smoking a pearl or pad. Units with programmable heat settings can be had for as little as $30. About $10 more than a conventional micro torch.
YIHUA 959D-Digital Hot Air Rework Station, High Power with 3 Memories, Airflow Efficiency, °F /°C Display, Accurate Temp.(212°F~932°F), Brushed Aluminum Panel & Safety Features - - Amazon.com
YIHUA 959D-Digital Hot Air Rework Station, High Power with 3 Memories, Airflow Efficiency, °F /°C Display, Accurate Temp.(212°F~932°F), Brushed Aluminum Panel & Safety Features - - Amazon.comwww.amazon.com
The interior of the sax is worse with green and rust spot all over.I've played worse than that......
It's called character......😀The interior of the sax is worse with green and rust spot all over.
Most horns don't have regulation screws.Only downside to the horn is that it doesn't have regulation screws for top and bottom stack.
Plan to replace cork for tech cork and felts. Starting with disassemble then reassemble a few times for practice.
Got cheap Zenghao pads to use. Horn is not worth much plus lots of lacquer peal red spots rust and a few dings.
After reading the great debate about how the material resonators are made of affects sound, I'm of the opinion that verdigris improves the tone. 😉The interior of the sax is worse with green and rust spot all over.
Regulation screws, what’s that😳 ? Cheap pads burn just as well as the expensive ones. Just make sure you don’t accidentally grab one to Dunkin your tea.Only downside to the horn is that it doesn't have regulation screws for top and bottom stack.
Plan to replace cork for tech cork and felts. Starting with disassemble then reassemble a few times for practice.
Got cheap Zenghao pads to use. Horn is not worth much plus lots of lacquer peal red spots rust and a few dings.
You’ll be amazed with a little elbow grease and a good brush how clean it will become. Use warm-tepid water not hot.The interior of the sax is worse with green and rust spot all over.
Should I get my carpenter mate to make something like this for me?Most horns don't have regulation screws.
It might be worth making a screw board. It won't take too long to make and will be useful if you do any others.
Silver is a frustrating finish. Great when it's clean and polished but ewww when it isn't.Regulation screws, what’s that😳 ? Cheap pads burn just as well as the expensive ones. Just make sure you don’t accidentally grab one to Dunkin your tea.
You’ll be amazed with a little elbow grease and a good brush how clean it will become. Use warm-tepid water not hot.
View attachment 19452
View attachment 19453
View attachment 19454
View attachment 19455View attachment 19456

Excellent work. Is this horn unlacquered?Regulation screws, what’s that😳 ? Cheap pads burn just as well as the expensive ones. Just make sure you don’t accidentally grab one to Dunkin your tea.
You’ll be amazed with a little elbow grease and a good brush how clean it will become. Use warm-tepid water not hot.
View attachment 19452
View attachment 19453
View attachment 19454
View attachment 19455View attachment 19456
Could do. It's just a block of plywood or mdf with holes drilled in it. Ferrees do them. If you can get a picture you can copy the layout. J90-J94 Assembly Boards
It’s a handy item if you’re disciplined using it. All hardware needs to be removed and stored exactly the way it was removed.
