Tech/maintenance Old Pads On Michael White Alto

After reading the great debate about how the material resonators are made of affects sound, I'm of the opinion that verdigris improves the tone. 😉

It gives a sax that dark green mossy sound.

In all seriousness, it seems quite likely that a layer of gunk inside the neck or body of a saxophone will affect the sound. The resonators are only a very small proportion of the internal body surface area, but the gunk could be a lot.

No doubt some enterprising manufacturer will be offering internal coating options soon. Probably Yanagisawa.
The T-WO10FR - pre-coated with a micro-layer of food residue for a mellower sound.
The A-WO02SM - smoked, for a 1930's nightclub vibe.


Are silver saxophones plated on the inside as well as the outside?
 
Cleaning the mouthpiece and crook can make a noticable difference. Designer gunk?
Just like those jeans you could buy, previously worn by some cowboy. Get your favourite player to blow it for an hour or two to get their unique gunk. 😱:confused::doh:
 
In all seriousness, it seems quite likely that a layer of gunk inside the neck or body of a saxophone will affect the sound. The resonators are only a very small proportion of the internal body surface area, but the gunk could be a lot.

No doubt some enterprising manufacturer will be offering internal coating options soon. Probably Yanagisawa.
The T-WO10FR - pre-coated with a micro-layer of food residue for a mellower sound.
The A-WO02SM - smoked, for a 1930's nightclub vibe.


Are silver saxophones plated on the inside as well as the outside?
The more goo on the inside the less it vibrates. Hold the taco coating please:confused:

Yes the inside is normally plated too.
60222732-79C2-47A4-8F02-5D2515FB4F15.webp
 
cleaning clothes dryer vents.
Spotted on Ebay and Amazon gonna take a few weeks as Chinese seller on both.
Try a local hardware or home improvement store. just needs to be 23” tip to handle. About 1 in diameter. Preferably plastic bristles.
Our local junk tool store has them.
 
Last edited:
Try a local hardware or home improvement store. just needs to be 23” tip to handle. About 1 in diameter. Preferably plastic bristles.
Our local junk tool store has them.
Had to order off ebay as not available in my locale at a hardware shop. 3 week delivery time:rolleyes:
 
What make is the green brush?
looks handy for toneholes.
Nice soft brush. Another small one is hiding in the handle. look for a baby bottle brush. I prefer those without a sponge on end. The sponge gets stuck on everything. Especially springs if you’re using it to clean around the posts.
1647024557030.png


This is item link to Walmart. It’s being stubborn. I’m a Robot :doh:
 
Last edited:
In all seriousness, it seems quite likely that a layer of gunk inside the neck or body of a saxophone will affect the sound. The resonators are only a very small proportion of the internal body surface area, but the gunk could be a lot.
I routinely use "The Works" toilet bowl cleaner (weak hydrocloric acid) for necks that have not been cleaned for years. I plug the small end with a rubber stopper and wrap plastic tape around the octave vent. I carefully pour in the cleaner, wait 5 seconds and pour it out. Then it is rinsed then plugged again and this time a mixture of water and baking soda is poured in to neutralize any remaining acid. Finally a flex brush and Dawn dish soap does the final cleaning.

The brass inside is bright and shiny just like it came from the factory, and before and after playing tests show that it plays more responsively and with a slightly brighter tone (I think).
 
I routinely use "The Works" toilet bowl cleaner (weak hydrocloric acid) for necks that have not been cleaned for years. I plug the small end with a rubber stopper and wrap plastic tape around the octave vent. I carefully pour in the cleaner, wait 5 seconds and pour it out. Then it is rinsed then plugged again and this time a mixture of water and baking soda is poured in to neutralize any remaining acid. Finally a flex brush and Dawn dish soap does the final cleaning.

The brass inside is bright and shiny just like it came from the factory, and before and after playing tests show that it plays more responsively and with a slightly brighter tone (I think).
Although hydrochloric acid works really well, I tend not to mention it on forums in case anyone decides they'd like to give it a try...with dire consequences. That's why I recommend acetic acid (vinegar) or citric acid (from crystals). Takes a lot longer (30 minutes on average) but is far less likely to end in disaster if someone forgets they have a 'crook in soak'. It's easily done.

Completely second your finding re. tone and response. Makes a noticeably difference.
A horn in for a service with a manky crook is just like a bonus on a plate; you know that even just cleaning the crook is going to make the horn come alive.
 
Although hydrochloric acid works really well, I tend not to mention it on forums in case anyone decides they'd like to give it a try...with dire consequences. That's why I recommend acetic acid (vinegar) or citric acid (from crystals). Takes a lot longer (30 minutes on average) but is far less likely to end in disaster if someone forgets they have a 'crook in soak'. It's easily done.

Completely second your finding re. tone and response. Makes a noticeably difference.
A horn in for a service with a manky crook is just like a bonus on a plate; you know that even just cleaning the crook is going to make the horn come alive.
I have followed your instruction in your book/website with citric acid. Works great.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,079
Messages
578,717
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom