Mouthpieces Old mouthpiece identification help

Messages
325
Location
SW Devon, UK
A friend has this old mouthpiece and asked me if I knew what it was. Says it was her husband's grandfather's, and she's similar age to my parents so I'd guess that would make him born around 1900 or a bit before. She thought it was for a clarinet but it's definitely saxophone - alto or possibly soprano as it seems a bit smaller than my alto pieces (actually more like clarinet size) although I haven't been able to compare the two directly. It's unusual in that it seems to be hard rubber (gone greenish brown) but the actual reed table looks like some sort of metal.

Does anybody recognise it?

Sorry not the best pictures but she lives close so I could take some more if it helps.

DSC_0507.webp
DSC_0510.webp
 
I would go over the lettering with something to make it readable. Also if the reed table is metal that should be easy to tell by just the weight of the MP. I read that composite MP metal with something else were not really made after the 1920s.
 
I would go over the lettering with something to make it readable.
I couldn't really see much obvious marking on it tonight, but I didn't have my reading glasses with me. I think it had a three-letter stamp on the bottom ring but I couldn't read it in the picture. I could probably get more detail if I have another look at it with the right glasses and a magnifying glass.

The reed table certainly looks like metal - there's a definite "layer" along the bottom edge of the mouthpiece. I've not seen one like that before. 1920s would be about right for the age of the original owner I think.

EDIT: The "metal" layer on the reed table looks more silvery than it came out in the pictures - not yellow like brass, more like pewter or silver.
 
Last edited:
Thanks Colin. I couldn't read it last night but magnifying the photo it's definitely Ben Davis. It looks to be in pretty decent condition apart from the fading of the rubber. The slight smoothing of the "knurled" pattern on the shank suggests it's been well-used, which is a good sign that it might be a good piece.

It looked small to me so I think it's probably for a soprano - if that's the case I won't be able to test it. If it's alto I can give it a try.

That one I linked to on Reverb is the only one I can find with the metal table and the rest rubber - none come up in completed sales on ebay. Going by that it doesn't look to be scarily valuable (they're asking £150 for that one and it's cosmetically much nicer) but may be a nice piece if it's cleaned up and plays well.
 
The Ben Davis alto pieces look like a sop piece. They have a small bore. You need to reduce the cork. Once you adjust the cork, other modern mouthpieces will be too big and not fit. 100 year old HR may be brittle so don't force it.

Hard rubber doesn't like hot water, so wash it cold. I like a gentle scrub with toothpaste to bring it up HR part. The metal is probably silver and riveted onto the rubber. Go gently. It's been there over a century.
 
That makes sense - it did look really small.
I know about hot water and HR, but thanks for the reminder 🙂

To be honest I don't know what she's wanting to do with it, she just mentioned the other day that she had an old "clarinet mouthpiece" that was her grandfather's. I had my clarinet with me as we were having a bit of a jam, but obviously it's not a clarinet piece after all. If she wants to sell it then probably best to give it a gentle clean, but I think it may just remain as a keepsake.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,524
Members
8,132
Latest member
LouisJR
Back
Top Bottom