Thanks @mizmar!
I discovered today (in the manual) that the NUX-B6 'will automatically detect the best 2.4Ghz frequency channel' (out of 14). and pair with the receiver'.
It's possible that this might be the reason for the differences between rehearsals 1 & 2. For the 1st rehearsal, I was late setting up (after the guitarist). Because I'd brought along all my 'new' equipment (NUX-B6, amp, power leads, tablet _ stand, etc.) .... but had forgotten to bring along my sax
! So I had to drive back home and pick it up. I'm still the but of many jokes about this 🙁.
In the 2nd rehearsal I was there early and I had already set up my NUX-B6 network by the time that the guitarist had set up his.
Over the last few days, I've learned a lot more about 'wireless transmission frequency ranges', different types of wireless systems, 2.4 Ghz.channels (number, overlap and separation), etc.
My post (above) still holds true. But I'm hoping that allowing the guitarist to set up his wireless network first, will enable the NUX-B6 to automatically select a different 2.4 Ghz. 'channel', free of interference.
Other tips, I've come across is to 'shield' (with metal) the receiver - on a lead from the amp to prevent interference.
In hindsight, it might well have been better if I'd had this kind of knowledge about the 'crowded' 2.4 Ghz. frequency band - and its 'channels' - before opting for the NUX-B6 purely on the basis of 'sound quality, reputation, ease of use, robustness, value for money, reviews, etc.'
On the topic of 'interference' between wireless systems that operate in the 2.4 Ghz. range, there are many positive posts on the NUX-B6. But also some that note that (despite the claim that the NUX-B6 'will automatically detect the best 2.4Ghz frequency channel' (out of 14). and pair with the receiver' and that 'the NUX-B6 'will never interfere with other wireless systems', there are a few posts that contradict these claims. In the sense of 'NUX-B6 almost always OK, and my preferred system for convenience, but ocassionally I needed to switch to my backup UHF wireless system.
I'll post my results.
I discovered today (in the manual) that the NUX-B6 'will automatically detect the best 2.4Ghz frequency channel' (out of 14). and pair with the receiver'.
It's possible that this might be the reason for the differences between rehearsals 1 & 2. For the 1st rehearsal, I was late setting up (after the guitarist). Because I'd brought along all my 'new' equipment (NUX-B6, amp, power leads, tablet _ stand, etc.) .... but had forgotten to bring along my sax
! So I had to drive back home and pick it up. I'm still the but of many jokes about this 🙁.In the 2nd rehearsal I was there early and I had already set up my NUX-B6 network by the time that the guitarist had set up his.
Over the last few days, I've learned a lot more about 'wireless transmission frequency ranges', different types of wireless systems, 2.4 Ghz.channels (number, overlap and separation), etc.
My post (above) still holds true. But I'm hoping that allowing the guitarist to set up his wireless network first, will enable the NUX-B6 to automatically select a different 2.4 Ghz. 'channel', free of interference.
Other tips, I've come across is to 'shield' (with metal) the receiver - on a lead from the amp to prevent interference.
In hindsight, it might well have been better if I'd had this kind of knowledge about the 'crowded' 2.4 Ghz. frequency band - and its 'channels' - before opting for the NUX-B6 purely on the basis of 'sound quality, reputation, ease of use, robustness, value for money, reviews, etc.'
On the topic of 'interference' between wireless systems that operate in the 2.4 Ghz. range, there are many positive posts on the NUX-B6. But also some that note that (despite the claim that the NUX-B6 'will automatically detect the best 2.4Ghz frequency channel' (out of 14). and pair with the receiver' and that 'the NUX-B6 'will never interfere with other wireless systems', there are a few posts that contradict these claims. In the sense of 'NUX-B6 almost always OK, and my preferred system for convenience, but ocassionally I needed to switch to my backup UHF wireless system.
I'll post my results.
