Accessories NUX B-6 Saxophone Wireless System

On the matter of the bell mount and stands etc., the NUX B6 also gets in the way of the Jazzlab style deflectors, requiring the mic to be moved to the side of the bell but, that seemed to be no problem for my buddy last night and, he uses a Hercules stand for his tenor. ... all we need now is one of these mics with three echo/delay settings and whey hey that's everything covered!
:cheers:
Pardon my ignorance but who says you have to put the NU-X at the far end of the bell? It looks cuter there? With the deflector, there is a logic behind it but whether you center the mic from the left or the right or the front or back shouldn't really make a difference. The only horn I ever noticed a positional requirement is my saxello because of the reach of the mic extension, I mount it around 10 o'clock so that I can get as high on the body as possible without mechanical interference.
 
I always have the Nux Mic on the rear of the bell, pointing directly towards the very edge of the bell so it doesn't over-emphasise the low two or three notes but rather picks up the full range of the horn. The reason I started doing this was charging out into the crowd tended to whack the mic but now prefer the sound.
 
I always have the Nux Mic on the rear of the bell, pointing directly towards the very edge of the bell so it doesn't over-emphasise the low two or three notes but rather picks up the full range of the horn. The reason I started doing this was charging out into the crowd tended to whack the mic but now prefer the sound.
I don't understand that, you can have the transmitter mounted on the side of the bell and the mic pointing to the edge of the bell. There is no specified angle of mounting the mic arm on the transmitter pack, so what am I missing?
 
If it's on the front of a Baritone bell, it's not going to reach all the way to be able to pick up the sound from the top front keys very well. It's also protected from being bashed by punters and the sax fits in a stand perfectly. Win/Win/Win
 
Wow, I'm really pleased to read all the positive responses on the NUX-B6!

I've been been toying with the idea of a sax mic since I started playing in an (oldie) rock band some months ago. In our (small) repetition room, I don't really need a mic. Except when I need to be heard in a 'loud section' with 2 electric guitars, keyboards, a bass guitar and drums.

A ribbon mic probably has the best sound quality and volume flexibility, but the band wants me to be able to move around, especially during solos. And so do I!. So I'm looking for a clip-on mic. (and amplifier) for an upcoming concert. On this clip-on mic shootout, the NUX-B6 came out as the best of the bunch and not too expensive. So I had the NUX-B6 in mind. I have absolutely no experience with sax mics so it was wonderful to read the supporting comments for the NUX-B6!

Once again, I feel very grateful for Cafe Sax and for its members who share their experience!

This thread came exactly at the right time for me!

Mike
 
If it's on the front of a Baritone bell, it's not going to reach all the way to be able to pick up the sound from the top front keys very well. It's also protected from being bashed by punters and the sax fits in a stand perfectly. Win/Win/Win
Ok, I see what you mean, the only thing is that the mic is hypercardioid and I don't know how much of the top front keys it would pick up anyway. But that's getting into minutia. I agree that on a bari, mounting it on the front is a very good option. I may have to play around with sticking the transmitter into the bell and directing the mic towards the top keys and see how much of a difference it makes, maybe it'll sound awesome or awful 🙂
 
Has anyone tried the B6 on a Bari ??
From what I have seen under product reviews on Youtube the B6 seems to be questionable on a Bari.
Any comments ....
I have used it on my 12m and there was no issue. The only thing is that the microphone arm is too short to run it to the center of the bell but I did not notice anything in terms of tone degradation. In fact, I know that Randy Emerick (used to play with Jaco Pastorius) has been using the NU-X B6 on his big horns.

YouTube is full of folks who just want to be "different" yet have no idea what they are doing. Of course, the B6 is not an RE20 and I might not use it for studio recordings but compared to the sound quality of the average PA, I have no concerns using it for live events on bari or even bass.
 
Yup, another happy Nux/Bari player here. As I said above, I mount it on the rear of the bell angled sideways to point directly at the edge of the bell to get a better balance of sound. Also to be able to use a stand without damage and go out into the crowd without fear of a whack.
 
Pardon my ignorance but who says you have to put the NU-X at the far end of the bell? It looks cuter there? With the deflector, there is a logic behind it but whether you center the mic from the left or the right or the front or back shouldn't really make a difference. The only horn I ever noticed a positional requirement is my saxello because of the reach of the mic extension, I mount it around 10 o'clock so that I can get as high on the body as possible without mechanical interference.
Good point. So far, I've only briefly tried out my NU-X mic via headphones with earphones. Just to find out whether my set-up works. It does, so I'm trying it out next Saturday.

TBH (as others have pointed out), I don't expect that my clip-on mic + amplifier will add much to my acoustic sax in a pub or small hall.
 
I tried out my NU-X mic this morning with the band. Using my 150W bass amp (with EQ)!

The NU-X mic (transmitter/receiver) worked like a dream. I side-mounted it on my tenor so that I could put the sax on its stand when I wasn't playing along, without removing the mic.

For one song that I wasn't playing along to, there was some discussion about the 'sound' of the band (keyboards/guitars). I wondered whether my sax mic was picking up and transmitting some 'background sound' so, to be safe, I switched it off. Turned out that the 'sound problem' had nothing to do with my sax mic. But I found out how easy it is to switch off the mic when not playing and switch it back on for songs that I do play along to. The re-connection with the receiver was immediate. The two guitarist were also playing with bluetooth connections but there was absolutely no interference between us.

To my pleasant surprise, the mic sounded pretty good with my bass amp! So - at the moment - it looks like I can use this amp rather than buying a 3rd (keyboard) amp. I'd intended to play around with the volume and EQ but I didn't get the chance *. My initial mid-volume and EQ (dialed-down bass, neutral high frequencies and boosted low and high mid-tones) seemed to hit the spot with the band. As the band leader said "sounds great, no need to change these settings!).

I'd previously said that "I don't expect that my clip-on mic + amplifier will add much to my acoustic sax in a pub or small hall". But it really did! I had so much more 'power' (volume) when needed for some fills and especially solos. But the mic was so responsive that I could play softly (through the mic) too when needed without adjusting any volume on the amp.

So thanks again for the positive reviews of the NU-X mic! I'm delighted with it!

Mike
* This morning at 07.30, I was so focused on packing and loading my 'new equipment' (NU-X mic, bass amp + lead + hand truck, extension power lead, tablet + stand) that I arrived at our rehearsal room at 08.15 only to discover that I'd forgotten to bring my sax!🙁

So I had to drive back home, pick up my sax and drive back, arriving just before 9.00. Not too bad, but I took a real ribbing! With a quick set-up from me, and after a cup of coffee, we still got going 'as usual'.
 
Last edited:
I found out how easy it is to switch off the mic when not playing and switch it back on for songs that I do play along to. The re-connection with the receiver was immediate
Just watch how long your mic is switched off for...

Based on the Nux 6 mic that a trombone playing mate uses, the receiver doesn't reconnect after about 10 mins idle time. Then it's a shout across the floor to whomsoever is closest to the mixer and a failed attempt to instruct them as to the location of the on button, followed by John and Bone insinuating a path between instruments and personnel to click the receiver back into action

Aksk me how I know this

Obvs, if your receiver is on an XLR cable by your feet, you can flick the switch whenever
 
Just watch how long your mic is switched off for...

Based on the Nux 6 mic that a trombone playing mate uses, the receiver doesn't reconnect after about 10 mins idle time. Then it's a shout across the floor to whomsoever is closest to the mixer and a failed attempt to instruct them as to the location of the on button, followed by John and Bone insinuating a path between instruments and personnel to click the receiver back into action

Aksk me how I know this

Obvs, if your receiver is on an XLR cable by your feet, you can flick the switch whenever
Yes, true but for a single gig, there is no reason to even turn off the transmitter - the battery life is about 20 h. If you are low or not sure, you can just turn it on for a second or two every 5 minutes. Tip: sometimes it is hard to identify the link light in the mess of LEDs but just switch the EQ setting and you'll immediately know if it is you who changes color on the soundboard.
 
Just watch how long your mic is switched off for...

Based on the Nux 6 mic that a trombone playing mate uses, the receiver doesn't reconnect after about 10 mins idle time. Then it's a shout across the floor to whomsoever is closest to the mixer and a failed attempt to instruct them as to the location of the on button, followed by John and Bone insinuating a path between instruments and personnel to click the receiver back into action

Aksk me how I know this

Obvs, if your receiver is on an XLR cable by your feet, you can flick the switch whenever
Good point and thanks for this! I think I ran into this problem on Saturday. I'd just switched my sax mic back on again and I (thankfully) looked at receiver to check the connection. It was flashing red so I switched the receiver on and off and the re-connection was pretty much immediate.

@LostCircuits You're right. Now I know that my sax mic is not transmitting any 'background sound' (audible above the guitar, bass and keyboard amps!), there's absolutely no reason to switch it off. For an upcoming gig (january) I'll have fully recharged batteries (and a spare set just in case).

I also use a pedal 'page turner' on my Tablet and I play an 'active' bass guitar (with a battery) too. The same applies. I always carry spare batteries for equipment and for any gigs, I start out with fully recharged (and also spare) batteries.

Thanks for all comments!

Mike
 
Hmmm ... perhaps a caveat (and perhaps not!),

The first time I tried out out my NUX-B6 at a band rehearsal, I ( and other members) had absolutely no problems. Everyone (including me) was delighted. At the 2nd rehearsal (our Saturday), one of our guitarists (the band leader) experienced a lot of 'static' when playing. Since we both use 'wireless' connections that operate on 2.4 Ghz., he attributed the 'static' to interference between our 2 wireless systems and soon switched to non-wireless connection (a guitar lead).

TBH, I'm not (yet) convinced. I fully accept that 2 different wireless systems operating on the 2.4 Ghz. frequency range can sometimes interfere with each other. But it seems strange to me that at the 1st rehearsal we had no 'interference' problems and at the 2nd we - in his opinion - did.

So next Saturday (our final rehearsal before an upcoming gig) I intend to do a 'test' by:
- first letting the band (and me) play without the NUX-B6 switched on and hearing whether the guitarist's usual setup (with an array of pedals and connections) operates 'static-free'; if not, it could indicate that something like a loose connection or broken cable is the 'source' of his 'static'
- then switching on the NUX-B6 and hearing whether this immediately interferes with the guitarist's wireless system
- if it does, running an XLR lead from my amp to my NUX-B6 receiver close to my transmitter, to hear whether this makes any difference

If not, it seems my only option is switch to a UHF-based wireless system that would allow me to choose between a much wider range of operating frequencies.

I'll post the 'test results'!
 
I fully accept that 2 different wireless systems operating on the 2.4 Ghz. frequency range can sometimes interfere with each other.
With respect, it doesn't work we like that (depending on what you mean by interfere!)
Ultimately it's about signal to noise - where noise means other sources of 2.4 GHz energy: WiFi, Bluetooth, microwave ovens, bad electric motors etc. Very often some radio Comms will stop working due to something outside your control.

Sticking the receiver on a XLR cable is sensible because you maximise the signal strength. Moving the WiFi router away from the receiver reduces noise.
But two of these receivers, next to eachother and on different channels; shouldn't interfere.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,429
Members
8,129
Latest member
Bartman
Back
Top Bottom