Figaro
Member
- Messages
- 55
- Location
- North Carolina
Chanting to self.... must not go shopping for a c-mel now, must not go shopping for a c-mel now, must not go shopping for a c-mel now..... 😳
No need to go shopping. Couple hundred members here will help you look. Go start your thread. “ NOT shopping for C Melody”Chanting to self.... must not go shopping for a c-mel now, must not go shopping for a c-mel now, must not go shopping for a c-mel now..... 😳

I'll see if I have any to add when I get home from work tonight! I believe I have a couple I can shoot out!@Jmoen3 do you have any other pictures ? I really didn’t take many before pictures
View attachment 18609

All you need is to play it against the backing track that you used and it'll be part of a "musical framework", I can see / imagine how this would sound from your playing. You are making strides!Needed to blow off some steam tonight. Playing is way out of tune but at least you get to hear what it sounds like. In reality I’ve only been playing since November daily. Not much prior to that for four years.
I did this in one take. Buescher C mouthpiece #3 tenor reed.
Dropbox - Error - Simplify your life
www.dropbox.com
SweetNeeded to blow off some steam tonight. Playing is way out of tune but at least you get to hear what it sounds like. In reality I’ve only been playing since November daily. Not much prior to that for four years.
I did this in one take. Buescher C mouthpiece #3 tenor reed
I actually did the test with a lightweight glove and a heavy weight. Both as vacuum and pressure. Due to the lack of testing equipment I didn’t have any other options. Largely I was after checking the neck joint fit.Since this thread has been revived, I have to admit I am a bit confused about the "rubber glove over the bell" vacuum or suction test. It is common practice to test the vacuum on flutes, oboes, and clarinet with bladder, cork or synthetic pads that are completely airtight. I have done it both ways with a Magnehelic and by blowing or sucking air with the end of the instrument plugged. On a well made instrument with toneholes that are intact a reading of zero on the mag indicates a leak free tube. What puzzles me about using this technique on saxophone is the fact that most pads are porous to some extent and in terms of the instrument as a whole, that porosity is cumulative. My question is where is the line drawn on where the amount of pressure loss is acceptable and where it is not.
A tech in Arizona who posts on repair facebook sites does a whole saxophone leak test with the rubber object over the bell using a Magnehelic set a 8in.H2O input pressure. A zero would be a perfect reading and an 8 would indicate "free flowing air" through the tube. He claims his pad work is leak free when he gets a reading of 7. I know that another well known tech uses a similar "measuring technique" as well which I think is based upon the amount of time before either the positive or negative air pressure is lost due to leakage. If you don't mind my asking, how do you describe the way you are doing it?
