After taking the week off I’m back at it. Multiple small leaks were giving me fits. Started over rechecking each tone hole. Marking dye or sharpie doesn’t fool the eyes. I couldn’t see this leak with a light. This is RH palm high E.
There is! I can't remember if I paid attention to this 'detail' back then, although i know about it... 😳I’ve been thinking about this. Is there a chance you did not buy dewaxed shellac ?
I personally use hot air to melt the shellac as I don't like flames. It's way too easy to burn things with a flame.Why make sticks in the first place when you can melt the flakes in the cup?
Four of seven leaky chimneys I found no problem. The lighter fluid definitely did the trick on the others. First clue I look for is gap in joint from inside.Said it before and I'll say it again; the best and only reliable way to check for soldered-on tonehole leaks is to drizzle lighter fluid around the exterior base of the tonehole, then run a finger around the interior and give it a sniff for any fluid contamination. If there's a leak, no matter how small, it'll find it - every single time.
I use hot air as well and I heat the cup from below, never had a problem with that. And no shellac flying around. 😉I personally use hot air to melt the shellac as I don't like flames. It's way too easy to burn things with a flame.
And flakes fly when blown with hot air... Messy. 😉
Berry, berry pyrrty!Almost done. Been a busy couple weeks. View attachment 18513View attachment 18514View attachment 18515View attachment 18516View attachment 18517

I think I mentioned it somewhere but after years of experimentation with the posture, I found sitting on a chair and supporting the bow with my right knee is the easiest and most comfortable way to play a Martin c-mel. If you have to stand, get a little stool to raise your right leg and do the same. Otherwise, I agree, you wish you had triple-jointed elbows and wrists and the neck of a heron. And don't tell me about duck bills nowFantastic job!
How do you like playing it?
Everytime I pick mine up, I think there must be a more comfortable position, but I fail to discover it...
Anyways. This gives me a rather high level target to match! But mine was in better shape initially.

They look interesting. What are they made of?I need to find your address again and mail you a c-mel MPC! And then stand behind you with a whip so that you actually practice
View attachment 18553
The material is Ultem, a medical grade resin, Ron Coelho was really pioneering it and it is my favorite material now for MPCsThey look interesting. What are they made of?
221B Baker Street. NW1 6XE, London UK.I need to find your address again and mail you a c-mel MPC! And then stand behind you with a whip so that you actually practice
View attachment 18553

