Introduction Hello there

Ruby

Member
Messages
73
Location
Torrington, Devon
Hello from down here in Devon. I've been onto this site quite a few times since I started playing (around 8 months ago) and am finding it really helpful with every aspect of my playing. I do need a bit of advice on mic-ing up for live work though. I play in a rock n roll band and always seem to be the victim of horrific feedback at most gigs. When it happens, the rest of the band now automatically look at me. :blush: I also find it difficult to get enough volume over the rest of the band. I started with a SM57 on a mic stand, went on to a clip on mic with wireless system and now also have a graphic equaliser pedal which has a volume boost if I press it. Despite all this, I still seem to get the best sound if I stand still in front of the SM57, but find it difficult to stay still once we start playing and I'm enjoying it. Has anyone got any advice please? That was a long greeting!
 
greetings and aloha from Brighton. As far as miking goes, from my experience of playing in loud bands (a lot of loud bands, in my case) it's pretty much down to your own tone, and that's down to your mouthpiece. You need a mouthpiece designed to genertae a tone that will cut through amplification (my Runyon Smoothbore sounds a bit wierd and edgy when I practice at home but in the thick of it at a loud gig with bad monitoring, wow does it sound great when you blow the hell out of it!)
 
Thanks Nachoman for the advice on the mouthpiece. I did start using a Runyon Quantum with a spoiler which was definitely a lot louder but then I got a new teacher who said he'd not seen one like that and he thought I'd be better with the one that came with the sax which is wider so I went back to that one and stopped using the Runyon. I'll try that one again and see how I get on. Hello Peter and Bob.
 
Hi Ruby and welcome to the breakfastroom.

There is some kind of box you can get which stops feedback, I'll see if I can find out what it is called.
 
The Behringer is a great bit of kit but it takes a while for it to scan through all the frequencies and analyse the problem ones - while it's doing that, it "squeals like a bee-atch", as they say, so set it up well before the paying public gets anywhere close.......

We only ever have to use it in places with bad acoustics, e.g. halls with lots of echo, or pubs with really low ceilings - normally it's not a problem. I also used to play into an SM57 but know what you mean about standing still in front of it! I now have a PRO35 clip-on, but have never suffered feedback problems with either mic. Do you use a monitor? The position of it relative to your sax mic could be the problem. Also check your gain setting on the PA - a high setting can set it off - back off the gain, and up the output volume to compensate. And see if you are playing through a channel with lots of effects, e.g. reverb - again that can cause it in rooms with dodgy acoustics.
 
Ruby, I reckon your problems are far more to do with your PA than your sax or your playing. A PA is there to amplify what you are playing, you aren't there to play in a way that suits the PA!

I don't know if you have a soundman in your band, but have a look at this guide to setting up a PA system - it takes some reading but it reads like it was written by someone who knows what they are doing. Changing the settings on the graphic equaliser looks like a good area to start.

http://members.cox.net/pasystem1/
 
Ruby wrote:
Thank you all for this advice. I have plenty of things to try now. Dooce your signature made me laugh until my face hurt.
You're welcome - although I think Jeremy Hardy has to take the credit for originating that line 😛
 
Welcome from overseas!!! Vancouver Island!! Definitely monitors are a big problem in Rock Bands, especially if Git players use stage volume and do not DI themselves, then everything slowly but surely gets cranked up. Ended up using clip on Shure mic but also had a seinhauser 421, which never had feedback so I just left clip on, on and used 421.....so 2 mics will out do gits (that isn't against you "old git").
 
try a sound reflector on your mic.. it dose two things it will deflect the sound back at you so you can hear better, but will also act as a isolator between the mic and the monitor.. you can get them from places like sax'co.uk..
a bit cheeper than the electronic way..
also make sure your main PA speakers are infront of you and not behind..
 
Hey Ruby, Stick with the quantum!!!!! Theyyrrrrrrrr gggggrrrreat! I play with a rock'n'roll band, I use an eddie daniels lig and I find that combo gives me a great punchy sound. Regards the mic I also use a clip on mic that has a monitor ear piece built in to it. I am going to contact the guy who made it for me and see if he can make some more. 😉
Good luck with the band and welcome from sunny....NOT...Rugby. :laugh:
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,289
Members
8,127
Latest member
PJ2116
Back
Top Bottom