- Messages
- 5,282
- Location
- France
So I've been brave or stupid enough to embark in that mission impossible. It all started a few year ago, when I decided to buy this unlikely British made soprano. I don't think I'd do it again, but I was in a GAS spree and found that horn appealing...
It's now been on the bench for a few days. Starting like this:
Then I gave it a good bath or shower, after removing all the keys of course:
Then I took it apart and checked the pads I ordered. I have done a pretty good job this time. I guess the tone holes were quite easy to figure after measuring a few of them as it all fell into place rather nicely. At least from a diameter point of view!
I went on to dry fit these new pads and evaluate where I'm going to enjoy my next challenges... It looks like some keys don't open much. At least not enough to my liking. That will be an interesting problem to solve!
It's now been on the bench for a few days. Starting like this:
Then I gave it a good bath or shower, after removing all the keys of course:
Then I took it apart and checked the pads I ordered. I have done a pretty good job this time. I guess the tone holes were quite easy to figure after measuring a few of them as it all fell into place rather nicely. At least from a diameter point of view!
I went on to dry fit these new pads and evaluate where I'm going to enjoy my next challenges... It looks like some keys don't open much. At least not enough to my liking. That will be an interesting problem to solve!
