- Messages
- 2,778
- Location
- Black Forest
There is that, and then there is that little thing about setting up a horn to exactly play the way YOU want it. That may include adjusting spring tension to match the shortcomings of your own hands, tweaking the regulation where every note is within a few cents regardless of the fingering and you can play the low Bb, B, C softly as in a morning sunrise. There are some techs that can get this level but they are in the minority. And then there is the driving, the waiting, the driving back to pick up the instrument, the playing and it still isn't dialed in, more driving, more waiting more driving back to the shop.🙂🙂 Of course I do my own work!!. All it takes is a lot of research, making mistakes and learning from them. Eventually you have total confidence in your horn and makes you and your horns better. Get a cheap sax. Take it to bits and work from there..Stephan Howards book is a good start and then Youtube. Matt Storhrer etc. I started because local "techs" were not to my standard.. (You have to kiss a lot of frogs before you find a prince!) As they say!! Regards..
🙂🙂
Repadding and setting up a horn is an art that goes way beyond replacing and leveling pads.
And I have leveled uneven frets on a guitar neck more than once, replaced pick-ups or installed internal mics in acoustic upright basses. Working on instruments is almost like meditation, even dent work if you know what you are doing, looking at the pilot magnet and seeing the dent smoothing out. Ok, I am beyond anal in that respect ...

) that the hand tool craftsmanship you mention will also involve making one's own pads.