Tech/maintenance Do you carry out your own repad?

Do you replace your own pads?


  • Total voters
    48
🙂🙂 Of course I do my own work!!. All it takes is a lot of research, making mistakes and learning from them. Eventually you have total confidence in your horn and makes you and your horns better. Get a cheap sax. Take it to bits and work from there..Stephan Howards book is a good start and then Youtube. Matt Storhrer etc. I started because local "techs" were not to my standard.. (You have to kiss a lot of frogs before you find a prince!) As they say!! Regards..
🙂🙂
There is that, and then there is that little thing about setting up a horn to exactly play the way YOU want it. That may include adjusting spring tension to match the shortcomings of your own hands, tweaking the regulation where every note is within a few cents regardless of the fingering and you can play the low Bb, B, C softly as in a morning sunrise. There are some techs that can get this level but they are in the minority. And then there is the driving, the waiting, the driving back to pick up the instrument, the playing and it still isn't dialed in, more driving, more waiting more driving back to the shop.

Repadding and setting up a horn is an art that goes way beyond replacing and leveling pads.

And I have leveled uneven frets on a guitar neck more than once, replaced pick-ups or installed internal mics in acoustic upright basses. Working on instruments is almost like meditation, even dent work if you know what you are doing, looking at the pilot magnet and seeing the dent smoothing out. Ok, I am beyond anal in that respect ...
 
I haven’t fixed a flat tire this week yet. Have two car A/C repairs to do though. One full system rebuild. The other is just a new pump, dryer, expansion valve and systems flush. Then I recharge the system.

Saxophone work, lost count of how many pads I’ve changed this week.
My best advice to anyone who wants to change a pad.
1) Take a picture.
2) Understand what the effects of thickness to tuning / regulation are.
3) Respect heat.
4) If your not mechanically inclined don’t buy tools to save money on repairs.
4) Give your tech a nice tip.

Fixed ?
1746602678153.webp

1746602748721.webp
 
@PigSquealer , in my own solutions from building and flying model aeroplanes (I actually built from kits, not today's Almost Ready to Fly (ARF) that are almost complete), I would have tackled that broken hinge with better than a tin/lead solder blob. That type of repair adds new meaning to a plumber's tool truck logo, "We fix your husband's plumbing repairs."

I wasn't full up in my last reply. I did replace all pads on my Vito tenor, which appears to be a Jupiter stencil. It's pads were bad, bought it a while back from Canada, played it until pads went further south. Recently bought a decent leak light to find where I have a leak. When they were inexpensive, bought a tenor pad kit from China, then individual pads where the kit had a few that were wrong sized.

My Venus tenor that I bought not long ago played nicely especially in the lower register until it fell off a metal chair by itself, bending keys and a dent in the lower portion behind the E key. I removed the dent partially and straightened a few keys.

Just need to find out where that leak is to return it to playability. Since turning 71, it seems now I do a little thing and feel good about it. Before, I'd do great things and felt good about it. It's why I've been putting off on repairing my early 1950's Beaugnier Vito low Bb bari. It somehow fell and separated the main brace from the bell that is sweat soldered.

As alluded to, finding a decent repair tech within a 100 mile radius is difficult.

Adds new meaning to:

Q: How many seniors does it take to change a light bulb?
A: Only one, but it might take him all day. 😉
 
A: they don't, they just sit around talking about how darkness was better in the good old days / how bulbs never blew in the past / how heroically they used to change lightbulbs...
New fangled inventions, first house I lived in had gas lamps.
And an outside privy and the tin bath tub used in the kitchen with water boiled on the range.
For once all that is true.
 
New fangled inventions, first house I lived in had gas lamps.
And an outside privy and the tin bath tub used in the kitchen with water boiled on the range.
For once all that is true.
Haha, you're not the only one. Don't forget the washing machine in the basement, which had a little stove underneath to heat the water. I got in trouble as a toddler when I tried to help my mom by cleaning out the ashes but I didn't know where to put them so I put them in the drum...
My dad's white shirts turned a shade of gray

True story!
 
Yes, I can do a complete repad including minor mechanical refitting. Have done it a few times with good results. I also can and have changed flat tires.

The time will come when all the cheap credit dries up and people will have to take tools in hand and learn how to use them, or go broke paying other people to do things for them.

A saxophone is not a very complex piece of machinery; it takes patience and the willingness to make a small adjustment and try, then repeat, many many times. That said, there are some people who seem unable to deal with that kind of work.
 
The tire analogy was a good one.

Also with a car. Who gets out on the hard shoulder, jacks up the car, takes off the wheel (or not if you can't find the new fangled security nuts) and puts the spare on?

I don't do that any more because our car doesn't have a spare 🙁 - it has a "kit" that injects some stuff and air into the tire. But the main dealer is now going to charge me £75 to replace the "kit" because it's expired.

My point is though that although I used to be able to change a tire on a car I don't. But even then, I didn't balance the wheel so that's a bit like changing a pad without fettling the venting etc.
Well, that goop is going to make the eventual repairer charge you a lot more to fix the tire - it has to be COMPLETELY removed or it'll set up and give you an uncurable unbalance of that tire.

And last I checked the roadside service guys don't drag a tire warehouse behind them. Hit a bottle or do any kind of damage the goop can't plug up, and you'll be riding in the wrecker to the nearest tire store. Better hope they have your size in stock. Me, I'd a million times rather have a spare tire. And even if you aren't physically able to change the tire, the guy on the truck can absolute change the tire for you - and heck, even air up your spare if it's low. What he can't do is magically conjure up a tire in your size, and put it on your rim.

The spare tire should be balanced on its rim, so when you put it on you've got good balance. I'd rather have a full size spare than a short-term donut, but either one is better than hoping the goop will get you moving again.

Same with bicycle tires. They sell tubes pre-loaded with goop nowadays, and sure enough the first time you air one up, the goop gets into the valve, and the valve starts leaking in pretty short order. Tossed those and went back to plain old bike tubes and patch kits. I replace the cement every year for a cost of something like $5.
 
Well, there are hamfisted knuckleheads everywhere. Again, if you grew up with my family's financial resources, with parents that came from the farm during the Depression, you learned that your brain and hands were the first resort - and part of that involves LOOKING at what you're trying to do and not goobering it up.
 
Not to mention the goop only fixes small "urban" leaks but if you are in the country and encounter that spike sticking out from a buried oak branch resulting in a 1" or larger puncture, no goop in the world is going to fix that. Oak, lost rake blades, you name it.
 
Sure, but "growing [LED] electroluminescent with rage" doesn't quite have the same, what? ambience?
I dunno, I think it was @Targa who mentioned that blue hue in LED lighting affected nocturnal polinators, but both the wife and I are beyond polinating age.
Well, that goop is going to make the eventual repairer charge you a lot more to fix the tire - it has to be COMPLETELY removed or it'll set up and give you an uncurable unbalance of that tire.
It also messes up the tyre pressure sensors installed to the inside of the tyre filling nipple (in spite of claimed compatibility with newer sensors - they still have to be cleaned). Here in US, expect to spend up to, say, $140 US per sensor to replace. (I liked my 1999 and older vehicles, no sensors and I still had to air the tyres with the same periodic timing.)
Not to mention the goop only fixes small "urban" leaks but if you are in the country and encounter that spike sticking out from a buried oak branch resulting in a 1" or larger puncture, no goop in the world is going to fix that. Oak, lost rake blades, you name it.
This is why until the manufacturers did away with the storage space for a regular tyre as a standard tyre, I always replaced the so-called smaller space saver with a standard tyre. Similarly, how does one get help when they are 200 or 300 miles from the nearest autorepair station and there is no cellular service available? (This is why I also replaced all rubber belts and hoses on the engine every 5 or 6 years, cheap insurance against breakdowns in rural areas.)
The time will come when all the cheap credit dries up and people will have to take tools in hand and learn how to use them, or go broke paying other people to do things for them.
I'm afraid (well, sort of :banana: ) that the hand tool craftsmanship you mention will also involve making one's own pads.

Last few pads I've replaced, I used hot melt glue to install them and a cheapo Harbor Freight electric heat gun (same I use to shrink insulation tubing on wiring and connectors). Found that in some cases I needed to float the pad a little to get it to seal around the hole. (And, although may not suit some, I felt safer in use than the venerable bunsen burner.)

Instead of purchasing hot glue beads, I just sliced a hot glue stick with a very sharp Exacto knife or razor blade.
 
This is why until the manufacturers did away with the storage space for a regular tyre as a standard tyre, I always replaced the so-called smaller space saver with a standard tyre. Similarly, how does one get help when they are 200 or 300 miles from the nearest autorepair station and there is no cellular service available?
That's exactly my situation, not 200 but 25 miles of dirt road and after having to flag down another motorist just to get to an area with cell signal while having to leave my dogs in the car, thanks but no thanks. And sacrificing that one tire by slowly rolling to an area where you can get help, with an AWD vehicle you'll need to replace all 4 tires if there is any bit of wear, and then very likely, the rim as well.
 
with an AWD vehicle you'll need to replace all 4 tires if there is any bit of wear, and then very likely, the rim as well.
This is one the reasons why I've never invested in a 4 wheel drive vehicle. Whilst in Gallup, New Mexico in the 1990's, I saw 4 wheel drives get stuck in snow and mud during and after rain and snow showers. (There are many dirt and gravel roads outside the city.) Basically I learned that if a situation needs a 4 wheel drive, not to even go there as I saw them get stuck just as easy as a 2 wheel drive.

Do we need to change this thread's title from, Do you carry out your own repad? to, Do you carry out your own repad and tyre repairs? :happydance:
 
Haha, you're not the only one. Don't forget the washing machine in the basement, which had a little stove underneath to heat the water. I got in trouble as a toddler when I tried to help my mom by cleaning out the ashes but I didn't know where to put them so I put them in the drum...
My dad's white shirts turned a shade of gray

True story!
Washing machine?
In the cellar there was a large stone basin above a cavity for a fire, sort of like how a bread oven worked, and that was for the clothes washing. Though more likely in the kitchen sink.
 
Well, there are hamfisted knuckleheads everywhere.
🙋🏼hi!
And yet my cack-handed abilities have, once again, saved me money.
Yesterday the scruffy sax (not me) was struggling with the low notes; and I spent the evening browsing G4M...
Today I took it and the leak-light into the toilet (no windows) and found a slight leak somewhere up around the A tone hole for certain keying combinations, fixed that and now I (not the horn) is singing again.

Just a few basics - even a chickentofu(kosher and halal), vegan , vegetarian)fisted non-hick can manage - can keep things ticking over.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,060
Messages
578,367
Members
8,128
Latest member
Roger Atlas
Back
Top Bottom