Tech/maintenance Do you carry out your own repad?

Do you replace your own pads?


  • Total voters
    48
IMG_4566.webp

Holy Corn Muffin,
That looks like one of my Mother in Law's muffins. Put a 12 gauge slug thru it, and it held together.
She was known as Betty the Broken Tooth Baker, in Red Hook.
Her teeth were perfect, customers, not so great.
Her large muffins, were often used to keep mooring buoys, from moving, near the Brooklyn Navy Yard.
True story. πŸŽΆπŸ΄β€β˜ οΈπŸŽΆ
 
A: they don't, they just sit around talking about how darkness was better in the good old days / how bulbs never blew in the past / how heroically they used to change lightbulbs...
Oh, I remember replacing incandescent light bulbs in the more often used spaces maybe every 6 months. Compact fluorescents were good, lasted some up to 14 years, but as in all fluorescents the phosforous coating would break down and by then produce half the light.

However, the new LED bulbs (except for the fluorescent bulb replacements) that screw into a standard candelabra socket seem to be just as good as the incandescents, because here in US they are more expensive but I have been replacing them at about the same frequency. The culprit? Inexpensive electronic components same as used in inexpensive radios, TV's, etc. that are going bad.

And I thought Lucas was the creator of darkness.
 
πŸ™‚πŸ™‚ Of course I do my own work!!. All it takes is a lot of research, making mistakes and learning from them. Eventually you have total confidence in your horn and makes you and your horns better. Get a cheap sax. Take it to bits and work from there..Stephan Howards book is a good start and then Youtube. Matt Storhrer etc. I started because local "techs" were not to my standard.. (You have to kiss a lot of frogs before you find a prince!) As they say!! Regards..
πŸ™‚πŸ™‚
I always had some excellent techs afround and learned (slowly) to distinguish the excellent from the good by ear. As a member of a
technical family I found the standard pad lacking and made something better. Which opens the question how many people make their own pads?
 
It is a very minor detail, but this is only true when the replacing pad has exactly the same height.
True but if isn’t you’ve got more to worry about than a probably insignificant amount of intonation as you’d need to make adjustments eg bending the key cup.
 
I always had some excellent techs afround and learned (slowly) to distinguish the excellent from the good by ear. As a member of a
technical family I found the standard pad lacking and made something better. Which opens the question how many people make their own pads?
Working on it. I have been wondering about what to do with the pesky squirrels in my garden.
 
True but if isn’t you’ve got more to worry about than a probably insignificant amount of intonation as you’d need to make adjustments eg bending the key cup.
The well used and thrashed early 1950's Le Blanc Beaugnier Vito low Bb bari sax I bought 14 years ago and straightened and repaired (ex-high school instrument), played badly in tune until I adjusted the pad heights. They were much wider than need be. This was after I straightened the bent key posts and racks.

I only paid $315 US with shipping included from east coast to NM. (A good portion of that cost was shipping.) It's once stout but now badly broken with missing pieces and extremely musty case was most of the shipping weight. Dumped it and bought a decent gig bag.

It now plays very well in tune, playing altissimo with it is a joy, but due to its low cost and shape, I was willing to do things with it that I might be reluctant with on horns that are in better shape.

Now I need to resolder the bell brace and do some major straightened. Handled by others during furniture moving, it fell over and got a bad share of damage.
 
Picked up my 1980's Le Blanc Vito tenor (Yam. YTS-23 stencil) yesterday. Repair chit says, "Service: bent keys, bent post, level all pads, pc & adj. $140.00, Tax $11.12, Balance $151.12".

I did have an interesting conversation with the repair tech in Lubbock, Texas, 95 miles away. "Someone did a repad job, but there are a lot of leaks. It will cost $151.12, should be done in about a week." I gave the go-ahead.

I didn't tell him who did the repad job. :banana:

This was my first all sax repad. I knew I still had leaks after I did it, but I have a 2nd tenor, a newer Venus one. For their seasoned experienced tech to do the adjustments for that small amount was worth it. They can do this a lot quicker than I can, better to be done with it.

Not realising it was a YTS-23 in disguise, I enjoyed its play and stoutness. Not bad for the some $400+ US I paid to a Canadian E-Bayer 13 years ago. Really am a happy camper now. πŸ˜€

Tarpley's was apologetic that it took almost 2 months, but I explained to them that I understood their workload. (Schools sent their loaners in for servicing after the school year ended in mid May, school year starts in mid August.) It is my second tenor.

Next, will send my Venus sop, Antigua Winds alto and Venus tenor in for servicing. May include my better Boosey & Hawkes Bb soprano clarinet, too. Haven't decided all at once or staggered.
 
I've done about a dozen horns for my own collection. The only one that had to go to a tech afterward was a Buescher tenor. Getting the pads to seat after the snaps were on was overly frustrating. I just couldn't get it to settle in.

Getting pads to seal isn't that hard most of the time. The really hard part for me is getting the setup to feel right, particularly spring tensions and key heights.

I've had 3 horns professionally done because I wanted them to be better than I thought I could get them.
 
Picked up my 1980's Le Blanc Vito tenor (Yam. YTS-23 stencil) yesterday. Repair chit says, "Service: bent keys, bent post, level all pads, pc & adj. $140.00, Tax $11.12, Balance $151.12".

I did have an interesting conversation with the repair tech in Lubbock, Texas, 95 miles away. "Someone did a repad job, but there are a lot of leaks. It will cost $151.12, should be done in about a week." I gave the go-ahead.

I didn't tell him who did the repad job. :banana:

This was my first all sax repad. I knew I still had leaks after I did it, but I have a 2nd tenor, a newer Venus one. For their seasoned experienced tech to do the adjustments for that small amount was worth it. They can do this a lot quicker than I can, better to be done with it.

Not realising it was a YTS-23 in disguise, I enjoyed its play and stoutness. Not bad for the some $400+ US I paid to a Canadian E-Bayer 13 years ago. Really am a happy camper now. πŸ˜€

Tarpley's was apologetic that it took almost 2 months, but I explained to them that I understood their workload. (Schools sent their loaners in for servicing after the school year ended in mid May, school year starts in mid August.) It is my second tenor.

Next, will send my Venus sop, Antigua Winds alto and Venus tenor in for servicing. May include my better Boosey & Hawkes Bb soprano clarinet, too. Haven't decided all at once or staggered.
So it was 8 pads x ($ 18.89 each)?
 
The only one that had to go to a tech afterward was a Buescher tenor.
Funnily enough It was a Buescher alto, that was my only real (possible partial) success at repadding. Perhaps I was just lucky in having one that had straight tonehole chimneys so the snapins just worked. No shimming.

Other DIY jobs have not been so successful so it's sheepishly off to the tech with it, listen to them suck air in over their teeth and look at me over the top of their glasses and ask "who on earth did this?"
 
I've done about a dozen horns for my own collection. The only one that had to go to a tech afterward was a Buescher tenor. Getting the pads to seat after the snaps were on was overly frustrating. I just couldn't get it to settle in.

Getting pads to seal isn't that hard most of the time. The really hard part for me is getting the setup to feel right, particularly spring tensions and key heights.

I've had 3 horns professionally done because I wanted them to be better than I thought I could get them.
My 156 was the quickest repad ever. Snap them in and be done with it. It took a few days afterwards for the pads to self level and form perfect seats but I think I did the entire horn in under 1 hour. Maybe a little more. Cutting the missing metal discs from cat food can lids was the most time consuming part (not factored in with the1+ hour for the repad).
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,060
Messages
578,362
Members
8,128
Latest member
Roger Atlas
Back
Top Bottom