Saxophones David's Interesting Finds - Oooh! A Selmer MkVII Baritone for sale!

I never knew they produced the VII baris and sopranos.

Not "real" ones (in the sense of fully new design of body tube, mechanism and key touches) - they continued to sell 'nino, sop, bari and bass of the MkVI design alongside the Mk7 tenor and alto. But some (a very small number) of those late, late MkVI saxophones seem to have been labelled as "Mk7".

Rhys
 
Last edited:
Neck has no M7...

138331469_2390846707705626_344770092340962456_n.webp


Is this normal?...

138345466_403368304320997_2274186152515697020_n.webp


Repair here...

138620306_1615577485302087_6186752365658845099_n.webp
 
Another confusion can arise from Selmer serial number charts that show Mk7 starting at a particular number without saying that MkVI continued for 'nino, sop, bari and bass. So some people mistakenly think they have a Mk7 just because of the number stamped on it.

Rhys
 
Hi there
I had a MkVII bari on approval from Howarths for a few weeks in 2005 when I was in the Apollo Quartet. Although it looked like a MkVI, it was marked MkVII and blew very differently from a MkVI. It was a actually a very good sound but had very bad intonation unless the mouthpiece was in precisely the right position - so useless really! No wonder they gave up and waited for the SA80's production!

Here are a few photos if it's of any interest.

I was a dogsbody on the 1976 World Sax Congress at the Royal College of Music, and I witnessed Jean Marie Londeix play an entire set (SATB) of MkVIIs in his recital.
 
Hi there
I had a MkVII bari on approval from Howarths for a few weeks in 2005 when I was in the Apollo Quartet. Although it looked like a MkVI, it was marked MkVII and blew very differently from a MkVI. It was a actually a very good sound but had very bad intonation unless the mouthpiece was in precisely the right position - so useless really! No wonder they gave up and waited for the SA80's production!

Here are a few photos if it's of any interest.

I was a dogsbody on the 1976 World Sax Congress at the Royal College of Music, and I witnessed Jean Marie Londeix play an entire set (SATB) of MkVIIs in his recital.

That's fascinating information and good photographs, although I couldn't see the style of the LH pinky keys. Did you get a look at the soprano as played by JM Londeix and do you remember any particular features such as the style of its pinky keys and palm keys ?

On my Mk7 alto and tenor the intonation is pretty good and better than my MkVIs - I wonder what Selmer could have done to make the bari so sensitive to mouthpiece position. Did you play it with a Soloist mouthpiece ?

I wonder whether Selmer would have records of the number of bari and sop Mk7s that were made. Probably Douglas Pipher over on SOTW could answer that question.

Rhys
 
Last edited:
That's so stolen. Really the most honorable course of action would for this to be donated to a local school where it can at least redeem itself and be remarked and given a new identity, Not the "Day of the Jackel method either".
I also read Selmer are doing trade ins now.so all is not lost for a legitimate swap by some worthy organization.
It's bang out of order to even try sell this as the obvious defacement and lack of a SN is almost 100% proof of concealment of theft.
I don't believe something as expensive as this just disappears.
Folk out there know where it came from. Armed forces perhaps?
Quite sickening actually reading this. How one would feel being the victim like losing a long known friend . We actually don't know how Hot this Bari is either. Someone should be aware there is a chance they could be visited by police as a result of this surfacing.
 
Last edited:
The RH pinky keys are NOT Mk7 style,
Explain to me, what are you seeing in the Mark VII photos provided on this thread which show this ?

All of the pics I am seeing on this thread of VII's show the same style pinky spats. Your comment intimates that VII baritones had a different style spat...just wondering how you can say this ?

(not being argumentative, I just don't understand how you conclude that - seems to me VI's and VII's had the same spat touches, and they both have the double-post support bridge between the end posts....so the spats would not prove or disprove anything).
 
Last edited:
Hi there
I had a MkVII bari on approval from Howarths for a few weeks in 2005 when I was in the Apollo Quartet. Although it looked like a MkVI, it was marked MkVII and blew very differently from a MkVI. It was a actually a very good sound but had very bad intonation unless the mouthpiece was in precisely the right position - so useless really! No wonder they gave up and waited for the SA80's production!

Here are a few photos if it's of any interest.

I was a dogsbody on the 1976 World Sax Congress at the Royal College of Music, and I witnessed Jean Marie Londeix play an entire set (SATB) of MkVIIs in his recital.
These are great pics, you should send them to @helen, as her website is now becoming the best visual repository of vintage saxes....
 
Lastly, regarding Pinky Table....we are all assuming that, because the tables of the VII Altos and Tenors differed from their VI cousins...that the table of the VII Baritone should also differ.

But maybe (it actually appears more likely than 'maybe')...it didn't.

Here's an enlarged pic of David Roach's pinky table area....looks to be the same table as Helen's pics and the OP's owner's/seller's pics....

MkVIIBariTable.webp
 
Well, all I know is that every authority agrees that the design of the Mark 6 baritone continued clear through to the introduction of the Super Action 80 - and that a small number of instruments were labeled "Mark 7" - and that other than the labeling they were the same thing as Mark 6s.

There were a very large number of mechanical and acoustical changes to the M7 altos and tenors. I would say that if it doesn't have similar changes, it's not a real M7 no matter what might have been engraved.

If Conn-Selmer were to take a generic Chinese alto and stamp it "Conn 6M VIII" it still wouldn't make it a 6M VIII.
 
And it's EXTREMELY bad form to buy any item with removed or altered serial number. Reputable dealers won't have anything to do with such an item.
 
Lastly, regarding Pinky Table....we are all assuming that, because the tables of the VII Altos and Tenors differed from their VI cousins...that the table of the VII Baritone should also differ.

But maybe (it actually appears more likely than 'maybe')...it didn't.

Here's an enlarged pic of David Roach's pinky table area....looks to be the same table as Helen's pics and the OP's owner's/seller's pics....

View attachment 16779
@rhysonsax was referring to RH pinky (low C/Eb) which are rounded like on a Mark VI.

On my MK7 brochure, there is no mention of MK7 nino,sop, bari (lowBb or low A) or bass. The photos show what look like MKVIs, as the pics are from the side I cannot tell whether they were stamped MK VII or not, but safe to say they look like MKVI.
 
Explain to me, what are you seeing in the Mark VII photos provided on this thread which show this ?

All of the pics I am seeing on this thread of VII's show the same style pinky spats. Your comment intimates that VII baritones had a different style spat...just wondering how you can say this ?

(not being argumentative, I just don't understand how you conclude that - seems to me VI's and VII's had the same spat touches, and they both have the double-post support bridge between the end posts....so the spats would not prove or disprove anything).

I'm not sure what you mean by "spat".

The Mk7 alto and tenor had much larger RH pinky key touches than did the MkVI. The pictures provided by the OP are small (like a VI) and NOT large (like a tenor/alto 7) The low C touch piece on a 7 was shaped like an ear but on a VI it was half round.

Rhys
 
Well, all I know is that every authority agrees that the design of the Mark 6 baritone continued clear through to the introduction of the Super Action 80 - and that a small number of instruments were labeled "Mark 7" - and that other than the labeling they were the same thing as Mark 6s.

There were a very large number of mechanical and acoustical changes to the M7 altos and tenors. I would say that if it doesn't have similar changes, it's not a real M7 no matter what might have been engraved.

If Conn-Selmer were to take a generic Chinese alto and stamp it "Conn 6M VIII" it still wouldn't make it a 6M VIII.
I also spotted a "design-wise Mk. VI Bari but labeled Mk. VII" in the wild, around 2005, in Grenoble, France. The owner played very, very well and I don't remember hearing any intonational issues.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,584
Members
8,133
Latest member
walthang
Back
Top Bottom