Saxophones Corton Foreign tenor .

I've certainly seen bassoons and clarinets badged Corton, and I seem to recall trumpets / cornets, I'd assume they were likely sourced from different factories as they're instruments requiring somewhat different production processes :confused2:
 
It's easy to see that this "Corton" was made by Amati. Corton was a brand name/trademark that use to belong to the importer of the sax. This is a "Corton" (stencilsax) made by Amati. Most stencils made by Amati didn't have the word "Amati" engraved or stamped on the sax. But after writng this they might show up? On the pictures I can't see the word "Amati". I can't see which model it is but I guess it's a "Super Classic" model. Amati made "Toneking" (c1945-1955), "Classic" (c1955-1972) "Super Classic" and "Classic Deluxe" (c1972-1990) and later ASS, AAS, ATS, ABS (+ model number and model name) . I got this information from a chart made by the german saxophone expert Uwe Ladwig.

Amati made stencil saxes for some saxophone manufacturer as well: Keilwerth in the 60's, Couf, SML, King Musical Instruments, USA "King Lemaire" ...... .

Amati also made saxophones engraved with "Lignatone" and "Musica Steyr". They are not what I would call stencils saxes. "Musica" is an old trademark. Conn and UMI had some "Musica" instruments. Steyr is a town in Austria where instruments were made ready for export. UMI Austria Vertriebsgmbh was in Steyr. An office and store house.
So calling a Corton an Amati is misleading, even if they were made in the Amati factory?
No. We are free to call saxes for what we want. I just don't like when sellers are trying to make more money when they call and Indiana for a Martin. I think it can mislead the buyer and have them to pay too much. "Amati" is almost an derogatory word when we talk about saxes. There are players who don't care what engraved on bell of sax. A good blues and rock player (amatuer) is playing an "Loius Robert" (Amati stencil) tenor from the 70's. He plays the shirt of most players and he is also keeping his in good playing condition. It's not what's engraved on the bell that's important, it's the tones/sound that comes out from the horn that matters.
 
It's easy to see that this "Corton" was made by Amati. Corton was a brand name/trademark that use to belong to the importer of the sax. This is a "Corton" (stencilsax) made by Amati. Most stencils made by Amati didn't have the word "Amati" engraved or stamped on the sax. But after writng this they might show up? On the pictures I can't see the word "Amati". I can't see which model it is but I guess it's a "Super Classic" model. Amati made "Toneking" (c1945-1955), "Classic" (c1955-1972) "Super Classic" and "Classic Deluxe" (c1972-1990) and later ASS, AAS, ATS, ABS (+ model number and model name) . I got this information from a chart made by the german saxophone expert Uwe Ladwig.

Amati made stencil saxes for some saxophone manufacturer as well: Keilwerth in the 60's, Couf, SML, King Musical Instruments, USA "King Lemaire" ...... .

Amati also made saxophones engraved with "Lignatone" and "Musica Steyr". They are not what I would call stencils saxes. "Musica" is an old trademark. Conn and UMI had some "Musica" instruments. Steyr is a town in Austria where instruments were made ready for export. UMI Austria Vertriebsgmbh was in Steyr. An office and store house.

No. We are free to call saxes for what we want. I just don't like when sellers are trying to make more money when they call and Indiana for a Martin. I think it can mislead the buyer and have them to pay too much. "Amati" is almost an derogatory word when we talk about saxes. There are players who don't care what engraved on bell of sax. A good blues and rock player (amatuer) is playing an "Loius Robert" (Amati stencil) tenor from the 70's. He plays the shirt of most players and he is also keeping his in good playing condition. It's not what's engraved on the bell that's important, it's the tones/sound that comes out from the horn that matters.
It's easy to see that this "Corton" was made by Amati. Corton was a brand name/trademark that use to belong to the importer of the sax. This is a "Corton" (stencilsax) made by Amati. Most stencils made by Amati didn't have the word "Amati" engraved or stamped on the sax. But after writng this they might show up? On the pictures I can't see the word "Amati". I can't see which model it is but I guess it's a "Super Classic" model. Amati made "Toneking" (c1945-1955), "Classic" (c1955-1972) "Super Classic" and "Classic Deluxe" (c1972-1990) and later ASS, AAS, ATS, ABS (+ model number and model name) . I got this information from a chart made by the german saxophone expert Uwe Ladwig.

Amati made stencil saxes for some saxophone manufacturer as well: Keilwerth in the 60's, Couf, SML, King Musical Instruments, USA "King Lemaire" ...... .

Amati also made saxophones engraved with "Lignatone" and "Musica Steyr". They are not what I would call stencils saxes. "Musica" is an old trademark. Conn and UMI had some "Musica" instruments. Steyr is a town in Austria where instruments were made ready for export. UMI Austria Vertriebsgmbh was in Steyr. An office and store house.

No. We are free to call saxes for what we want. I just don't like when sellers are trying to make more money when they call and Indiana for a Martin. I think it can mislead the buyer and have them to pay too much. "Amati" is almost an derogatory word when we talk about saxes. There are players who don't care what engraved on bell of sax. A good blues and rock player (amatuer) is playing an "Loius Robert" (Amati stencil) tenor from the 70's. He plays the shirt of most players and he is also keeping his in good playing condition. It's not what's engraved on the bell that's important, it's the tones/sound that comes out from the horn that matters.
Tomsax the serial number is 161821
 
I’ve seen some very mixed reviews on here but is that based on the 70’s Amati’s? Mine was built in 1960 according to the factory and it’s a monster! It’s a heavily built instrument, yes it’s a little clunky but then it’s been 10 years since her last overhaul. She’s a dream to play and when paired up with a Runyon Quantum, she does exactly what I want,
From soft whispering breathy tones to big fat parping notes, she produces the goods every time. Despite being dropped and knocked over by the base player, she’s still a great horn. I had the option to trade up a while ago and with 4k burning a hole in my pocket, I couldn’t find anything that matched her!
 
I’ve seen some very mixed reviews on here but is that based on the 70’s Amati’s? Mine was built in 1960 according to the factory and it’s a monster!
You can never be sure! Amati "Toneking" was up to c #20000 (1945-1955). Amati "Classic" up to c #37000 (1955-1972) .... . Manfacturer behind iron curtain didn't care so much about when a sax was made. The didn't had PR or sales departments that answered questions in the same way as the american manufacturer did. I ask Vincent Bach International when my Buescher C-soprano was made. I got a letter from them and the told me that my soprano was made; September 10, 1923 and also that Buescher made c 500 C-sopranos.

You got your information after the iron curtain so I guess it's close to the truth.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway πŸ˜€

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,059
Messages
578,318
Members
8,127
Latest member
PJ2116
Back
Top Bottom