Mouthpieces Chinese metal mpiece

sushi..... if you havent bought a mp before then I suggest you do some home work on google.
For example the mp you have posted the link to, is an Alto, it also has a completely different way of attaching the reed via the ligature.
You will notice a groove in each side of the mp where the special ligature slides.
I`m not sure what type of lig this is called.
As far as sizes go, they vary greatly.
Tip opening and chamber size being the main two.
google ....saxophone mouthpiece diagrams
Then google ....saxophone mouthpiece charts

It may be that the material on the one youre looking at is yellow brass (all brass is yellow) but being chinese the quality may be questionable.
This is the main risk with buying a cheap chinese mp. also that the sizes may not be what they should be .....but then, there are many versions on mp sizes from reputable mp manufacturers.

The gold plated one that I looked at was definately described as copper thats why I went for the silver plated brass version.
Also I dont know much about mp materials and it may be that copper is a perfectly good mp material.
But my thinking was that if copper was good,? they would make saxes out of it. but they dont.
After all this youre probably going to be really confused
and you would be right to be
Its a minefield out there.
but thats the risk if you go cheap. so minimize your risk.
Regards
Allansto.
 
The seller uses a lot of different photographs for mouth pieces which has stalled my going for one.

Brass is an alloy of copper and zinc and I put the statement of the mp being gold plate on copper down to something being lost in the translation.

A ligature that slides on is called a slide on ligature as far as I'm aware.

I have recently acquired two second hand no name Chinese mouthpieces at prices that were worth a gamble and the difference is notable.

There seem to be several variations.

There's the Sharkbite, which a lot have tried and rate highly. http://www.ebay.co.uk/itm/151000837688?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

The Delacole which I have for sop, that is good quality and produces a good sound. http://www.pjlamusic.com/delacole.htm.

John packer have a range on their web site that look similar. http://www.ebay.co.uk/itm/170420891421?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

These all appear to me to be the same thing and based on a selmer jazz. I may be wrong and this has caused my dalliance.

Then there is the tenor piece I acquired, which is ok but made of thinner metal, less well machined and finished with a thinner gold plate. It produces an acceptable tone but nothing remarkable.

I've noticed G4Music do a Rosedale piece which probably comes from the same source as their instruments but looks like a high baffle piece with the poor finish as far as can be told from a photograph. http://www.gear4music.com/Woodwind-Brass-Strings/Rosedale-Metal-Mouthpiece-for-Alto-Saxophone-2/H27

The trick is getting one of these higher quality pieces at the rock bottom price.

The one you have ordered looks like one of the quality ones in the photo. The ones based on the selmer jazz.

I hope it is and await its arrival and your review with anticipation.

Bargain hunters anonymous
 
thanks colin
When I was trolling the internet for mps I didnt have much luck finding any new sharkbites anyway.
If I find the mp I have aquired to be of dubious quality then I may just attempt to make my own .
In fact that was my first thought until I found out about these cheap chinese mps.
I will post the results of my findings when I get my shipment.
Regards
Allansto
 
So how come I can buy a complete brand new sax for $600 aus and I have to pay $600 for a jody jazz mouthpiece

Nothing strange with putting an expensive mouthpiece on a cheap saxophone. I still do it, but my price limit for the mouthpiece is £200, that gives me excellent choices.

Please keep us updated about your purchase. i am particularly curious about the scature.
 
I have no idea, but you will find out shortly. If it is not there, write a complain requesting the missing scature. Whatever it is.

Perhaps it's from the Italian scaturendo, which is what came up when I Googled scature the other day. Seems to be something to do with being springy. Is that right? Perhaps it's a springy ligature...? 😱
 
Actually, further investigation suggests it's something to do with flowing or deriving, suggesting that it's a copy of a more well-established brand, maybe 🙂
 
A scature is a plain old ligature. Don't ask me why, but I've noticed it crops up quite often in foreign ads. Mebbe it's the Italian term for a ligature?

Stop Press! It IS the Italian name for a ligature! Bugger me with the rough end of a pineapple!
 
Last edited by a moderator:
A scature is a plain old ligature. Don't ask me why, but I've noticed it crops up quite often in foreign ads. Mebbe it's the Italian term for a ligature?

Stop Press! It IS the Italian name for a ligature! Bugger me with the rough end of a pineapple!

Well, I volunteer to follow you with a video camera in any Italian woodwind shop while you try to buy a scature.
 
No, this is a euphemism...
 

Attachments

  • uploadfromtaptalk1361987694375.webp
    uploadfromtaptalk1361987694375.webp
    21.5 KB · : 242

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,566
Members
8,133
Latest member
walthang
Back
Top Bottom