Saxophones Cadence baritone and John Packer

Paul Warner

Member
Messages
307
Location
Teignmouth, Devon
I am so pleased with my new Cadence baritone from John Packer that I feel I should give them a major thumbs up for this instrument. Although it is advertised under the `beginner` section of their listings for some reason, I would certainly classify it as a professional instrument. The tone and projection are quite outstanding. Everything falls beautifully under the fingers and it offers a wonderfully expressive response to the player. I have played a great many baritones as it is my preferred saxophone `of choice`; this one stands comparison with any and very much has the feel of the Yanagisawa I once owned and always regretted having sold. The only observation I would make is that, like the Yani, the low A key is not as immediately accessible as the Yamaha`s- you can`t `roll on` to it as readily as I would like. I will probably try to build up this key at some point and would appreciate any advice in this regard.
In general I wholeheartedly endorse this instrument, and would in future also look carefully at the other Taiwanese instruments J.P.`s also offer before spending more money elsewhere on buying saxes that look remarkably similar to these.
I won`t mention names, but next to the altos I also looked at were a well known and much publicised brand which didn`t look very different in design, materials or general finish to J.P.`s own badged `upper`(i.e. Taiwanese) range. The price, however, was several hundred pounds higher. I would say that if buying a Chinese instrument,then proceed carefully. Some of them are now excellent, even oustanding, but you do tend to get what you pay for. The Taiwanese, however, do seem a class apart, and could be said to produce some of the finest instruments now available.....hence the `Cadence`!:welldone:welldone:welldone
 
I am so pleased with my new Cadence baritone from John Packer that I feel I should give them a major thumbs up for this instrument. Although it is advertised under the `beginner` section of their listings for some reason, I would certainly classify it as a professional instrument. The tone and projection are quite outstanding. Everything falls beautifully under the fingers and it offers a wonderfully expressive response to the player. I have played a great many baritones as it is my preferred saxophone `of choice`; this one stands comparison with any and very much has the feel of the Yanagisawa I once owned and always regretted having sold. The only observation I would make is that, like the Yani, the low A key is not as immediately accessible as the Yamaha`s- you can`t `roll on` to it as readily as I would like. I will probably try to build up this key at some point and would appreciate any advice in this regard.
In general I wholeheartedly endorse this instrument, and would in future also look carefully at the other Taiwanese instruments J.P.`s also offer before spending more money elsewhere on buying saxes that look remarkably similar to these.
I won`t mention names, but next to the altos I also looked at were a well known and much publicised brand which didn`t look very different in design, materials or general finish to J.P.`s own badged `upper`(i.e. Taiwanese) range. The price, however, was several hundred pounds higher. I would say that if buying a Chinese instrument,then proceed carefully. Some of them are now excellent, even oustanding, but you do tend to get what you pay for. The Taiwanese, however, do seem a class apart, and could be said to produce some of the finest instruments now available.....hence the `Cadence`!:welldone:welldone:welldone

Well put. I don't have your experience but bought my Cadence as a cheap "taster" to see if I got on with the bari before investing in a "proper" named brand. Suffice it to say that I won't be bothering with the second stage of the plan.......
 
How much difference is between the Gear4music bari which is about half the price as the JP Cadence (£2000.00) plus whats the cheaper JP MKII bari like which is about £1200.00.As a not used much horn is it the cheaper 1 which fits the bill ?
 
JP often have good deals on their ex demo 'lightly used' instruments - I paid just over half price for my Cadence bari from JP, and find the Cadence a hugely better instrument than the JP044 which I had originally.
 
I think the cheaper one is a decent workhorse and very similar to the Gear4M model. In fact, to be frank, it looks the same! The G4M is ok. for straight ahead big band type stuff, and very good for the money without question. It will probably always need a setup built into the purchase price. The Cadence blew me away straight out of the box. It is in another league, and is what I would describe as a soloists` instrument. It has that bit extra in every way, and is every bit as well made and designed, in my opinion, as any of the competition. In fact, my guess would be that it comes from the same factory as much of the competition! It also looks really good; the high copper content of the bell section (described as `American Brass`) really glows- in stage lights the inside of the bell seems to emit a rich, deep red glow (poetic, that!), and contrasts beautifully with the rest of the body which is normal brass. Great for posing, then.
If you`re lucky, or prepared to go on a waiting list, you might also be able to go for a `demo` model at around £1600. An extra special bargain. Given that a G4M will need a setup, bringing it to around the thousand mark, I think it`s a no brainer. However, if you just want a bari for a rehearsal band or similar, the G4M is very hard to beat.
 
Does the Cadence have a Selmer style low A while the Mark II has the Yamaha style low A? How about the double octave vent? It seems to be on the Mark II but not clear if it is on the Cadence. Specs and pictures are scarce.
 
Does the Cadence have a Selmer style low A while the Mark II has the Yamaha style low A? How about the double octave vent? It seems to be on the Mark II but not clear if it is on the Cadence. Specs and pictures are scarce.
Not sure you'e going to get much of a reply, as the thread is over 12 years old and the original posterhasn't been on the forum for over four years. Cadence is an in house brand of a UK retailer, John Packer. They still list it for sale so may be able to answer any queries.
 
Not sure you'e going to get much of a reply, as the thread is over 12 years old and the original posterhasn't been on the forum for over four years.
However they will have been notified of the question so who knows? Plus someone else may have some knowledge but I agree contacting JP should be useful
 
Not sure you'e going to get much of a reply, as the thread is over 12 years old and the original posterhasn't been on the forum for over four years. Cadence is an in house brand of a UK retailer, John Packer. They still list it for sale so may be able to answer any queries.
Thank you for the reply and insight. I do know this is an old thread but am currently looking at the instrument and seeking owner's knowledge given that dealer and manufacturer photos and descriptions are very limited in photos. I picked up on this question given a few photos in this thread but the evidence is inconclusive.
 
The only observation I would make is that, like the Yani, the low A key is not as immediately accessible as the Yamaha`s- you can`t `roll on` to it as readily as I would like.
So the Cadence has the Yani low A mech? I believe the MKII HAS THR Yamaha style mech. What about the double octave vent? Does the ance have this feature?
 
Both these features are on the startone from Thomann.

 
Does the Cadence have a Selmer style low A while the Mark II has the Yamaha style low A? How about the double octave vent? It seems to be on the Mark II but not clear if it is on the Cadence. Specs and pictures are scarce.
Hate to say it...

If there's any chance you can play before you buy, you'll get what you decide you want

The Yamaha style low A mech is worth looking for, as you know, or you wouldn't've aksked... But there's a fair risk with a Packer online buy, especially with two model options, and those model specs might change any time Packer or their suppliers need to cut corners, that you could end up with a floppy A

No-one wants a floppy A

Or...

No-one wants A floppy
 
Hate to say it...

If there's any chance you can play before you buy, you'll get what you decide you want

The Yamaha style low A mech is worth looking for, as you know, or you wouldn't've aksked... But there's a fair risk with a Packer online buy, especially with two model options, and those model specs might change any time Packer or their suppliers need to cut corners, that you could end up with a floppy A

No-one wants a floppy A

Or...

No-one wants A floppy
Agree. A blind online sale is a challenge. I think I have discovered (unless production changes) that the mKII has the Yamaha style low A mech. and double octave while the Cadence has the Selmer style low A mech. What I am trying to avoid is the spongy Yani mech on the low A. My Super Action 80 series 1 is similar. Thanks!
 
Agree. A blind online sale is a challenge. I think I have discovered (unless production changes) that the mKII has the Yamaha style low A mech. andhe double octave while the Cadence has the Selmer style low A mech. What I am trying to avoid is the spongy Yani mech on the low A. My Super Action 80 series 1 is similar. Thanks!
A low A mech that obeys every whim of your left little finger is a joy to command

My Bauhaus bari, a defunct Chinese-manufactured make of laudable quality, has an imitation Yamaha low A mech that closes with a gratifying 'thunk', in time with the music... No hesitation... No anticipation.. just a lovely thunk (not making an additional point here, just boasting)

Also, to consider... a Yamaha mech made with softer (than Yamaha) brass rods... they look the part, but make the mech sloppy... You won't know if that's where J Packer has made savings until you try

Reading your last missive, do you have a(n) SA80 1 Baritone?
 
A low A mech that obeys every whim of your left little finger is a joy to command

My Bauhaus bari, a defunct Chinese-manufactured make of laudable quality, has an imitation Yamaha low A mech that closes with a gratifying 'thunk', in time with the music... No hesitation... No anticipation.. just a lovely thunk (not making an additional point here, just boasting)

Also, to consider... a Yamaha mech made with softer (than Yamaha) brass rods... they look the part, but make the mech sloppy... You won't know if that's where J Packer has made savings until you try

Reading your last missive, do you have a(n) SA80 1 Baritone?
I do have a SA80 series I. It has much wear and sloppiness to it as well as some upper register intonation flaws. It is on loan so not really owned. That’s why I’m looking. I like to Yam low A mech but not the house tone of the Yam coming from an old Conn. I played a 52 and a 61 years ago. I’m looking for new and modern.
 
Are there many of those around?

I play a SA80 (I) alto, bought new in 1983 which still seems to do what an alto can do
I could find one in England but am not interested in the no lacquer. Also trying to find a Leblanc Premiere. That is the same as the Conn but available in lacquer. There are a number of house boutique horns that look just like this one too. Trying to get some in stock and then try.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,436
Members
8,130
Latest member
tommyliehe
Back
Top Bottom