Saxophones C Melody Saxophones

Excellent! Glad to hear it. 🙂

Have you got a mouthpiece that works well enough to be going on with? The Yamaha 7C tenor seems fine on mine (softish reed), but it would depend on the neck length - I guess that's why the Thomann neck is on the short side; so that tenor mpcs fit directly.

You did mention hacksaws...
Just us nightbirds Andy! My Melody has a couple of things that Dawkes will fix for me tomorrow including a wire guard that is stopping a pad from opening and then I will get on the case! She is beautifully built - as are all early Martins! The patina is stunning! I could not be more pleased! My flock grows! No more horns now until I get my desires! A silver tenor and a baritone!
 
That sounds great, Prof 🙂

Yep, no more horns for me for a while either. I want to get my slightly mangled ebay straight sop done - possibly by me, we'll see - then I might put some more thought into auditioning repairers til I find one I want to stick with 🙂

What little research I've done so far has led me to think that most of the cost is in the stripping and oiling part of a service - big price differences between a "playing condition" repair and a full service. I figure I can strip and oil for myself, then pay someone to repair it afterwards... It might need it a bit more.

I'm thinking repairs on my sop would be pricey, and I'm broke, so I'm entertaining myself by seeing how far I can get.

Here's another good Matt Stohrer video, on oiling the action. He has a slightly different view of it to Stephen Howard's page on the subject - suggesting (insisting?) you shouldn't just keep topping up the oil, you should leave well enough alone, and occasionally strip and re-oil properly:


I'm inclined to agree. Oil invites fluff and grime (fluffophilia?), which forms gunge. It has a wicking action, so by adding key oil externally, you're helping to wick more crap into the key barrel.
 
I've just noticed that Ed Pillinger's webpage of "New & Recent Additions" now features a C Melody mouthpiece. http://www.pillingermouthpieces.co.uk/page12.html

He makes great mouthpieces, is a very helpful chap and his prices are very reasonable. I have Pillinger pieces for all of my horns, from 'nino to bass (not forgetting C soprano) EXCEPT for C Melody. As I am going to visit him next week I might have to talk to him about a C Melody piece - it would look good in his Bronzite material (as shown on that webpage).

Rhys
 
Eds Prices are incredibly cheap for such workmanship , puts a perspective on those asking £600+ for the things . I`d love to try a super large chamber Bronzite Tenor - My guess it'll be not unlike the LAW LCM I have on Alto
 
Stoopid Bank Holiday, my C mel is sitting in some post office warehouse somewhere, instead of being here with me.
Sorry to hear that. I can empathise (not that that helps).

Mine spent a weekend in the ParcelFarce warehouse, and might well have come on the Friday, if my order hadn't been delayed while Thomann waited for a plastic recorder thumb rest I'd ordered to be back in stock - ignoring my emails to just get on with sending my sax...

I actually thought that was the bank holiday weekend, so I was even more frustrated, til I found I was wrong. Yes, I am that out of touch :old:
 
Europeans tend to call them C-Tenors - UK and USA call them C-Melody ...... or that`s what I`m lead to understand , same horn ..

The Neck style doesn`t change what they`re called either - the naming stays the same per location regardless of the neck fitted and the necks appear to be inter changeable anyway
 
Last edited:
Seeing as how C-Melodies are suddenly de rigeur at the Cafe I thought I'd better get my old Wurlitzer out and give it a blow, the first time for over a year. Impressions:
1. My sling still feels like a cleric's dog collar when I have it high enough for the C-Mel.
2. Instant access to all the notes from top to bottom, just like playing alto; but
3. I have to take great care with my embouchure to avoid overtones, undertones, unwanted altissimo (no offence intended!) and a strange slow vibrato that I've never experienced before.
4. It sounds OK and I expect that with more practice and a different mouthpiece I'd get the kind of sound I want from a tenor.
5. My playing has definitely improved since the last time I blew my C-Mel.
I've often wondered why C-Mels went out of fashion to the extent that, until recently, you couldn't buy a new one.
Am I going to invest time and effort in playing my C-Mel or money in buying a new one? I don't think so but, as a dedicated follower of fashion, I might have to change my mind if everyone else does it.
 
Octaving can be a number of things, anything from overblowing due to a narrow tip piece to a leak somewhere - the slow vibrato (or Warbling) can also be down to leaks , or bad design (a lot of early Taiwanese horns suffered), the two cures for warbling are 1:- pushing the Mp right up the neck and 2:- dropping a champagne cork in the bell - the former usually gets old Jupiters sorted ..

I`d have it checked over (if you`re not up to it yourself) and look into what mouthpiece you`re using , have you changed your Alto/Tenor setup to a harder reed or wider gap ? if so this will affect your playing on a narrow gap piece you`ve not played in ages ...... just suggesting , I`ve not got a clue as to what you`ve got .
 
Octaving can be a number of things, anything from overblowing due to a narrow tip piece to a leak somewhere - the slow vibrato (or Warbling) can also be down to leaks , or bad design (a lot of early Taiwanese horns suffered), the two cures for warbling are 1:- pushing the Mp right up the neck and 2:- dropping a champagne cork in the bell - the former usually gets old Jupiters sorted ..

I`d have it checked over (if you`re not up to it yourself) and look into what mouthpiece you`re using , have you changed your Alto/Tenor setup to a harder reed or wider gap ? if so this will affect your playing on a narrow gap piece you`ve not played in ages ...... just suggesting , I`ve not got a clue as to what you`ve got .
Thanks, Ads. I've kept the C-Mel as a curio rather than a functioning instrument, although I did have it professionally set up a few years ago. It was mere curiosity that made me get it out again and my last post was intended to be semi-humorous. However, on reflection, I'm going to spend a bit more time with it. I've always thought that the loss of one full tone at the bottom of the tenor range was a small price to pay for the advantages of a C-Mel. If they come back into fashion (is the enthusiasm at the Cafe anything to go by?), we should find a good range of instruments and mouthpieces coming onto the market. If that happens, I think C-Melody will have plenty going for it.
 
Good question Richard! Are they coming back into fashion? Also the weight of mine is very heavy. Surprising but it may well be to the fact they were handmade with thicker metals, screws, etc.
 
it was exactly a year ago when I had mine (when I did the review) . not many joined in buying them then but a few dusted theirs off ..... these things tend to go in cycles, suddenly it`s C-Melody time --- then its Bari time -- then Sopraninos are being sought out and so on .....

BTW all saxes are handmade Prof - even Chinese ones, little Automation has entrered the sax making world except maybe for Yamaha and even they are mostly handmade - look at some of the Youtub vids
 
My new Thomann is pretty heavy too, Prof - heavier than I remember the Jericho tenor being, and definitely sturdier.

Maybe the Chinese factory that makes them had a look at an old one (possibly a straight neck Conn, judging by the micro adjuster), and thought the weight was an essential part of how they work.
 
I measure the weight of horns as heavy in comparison to my Step 700 tenor which is the heaviest tenor I have ever tried to play! But I was amazed with the Martin as I already have two other Martins from the same era
 
Is there a difference between C-Melody and C-tenor?
The C tenor is often called C melody. The correct name is C tenor. I think they got the name C melody because if was easy to play the singing lines from the piano charts. But then there was the C- melody/-tenor Home Model. It was a c-tenor with just 12 keys. Keyed from C#1 to C3. No palm keys or side keys. Martin made them.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,456
Members
8,130
Latest member
tommyliehe
Back
Top Bottom