Saxophones Better Sax Session vs. Selmer Signature vs… tenors at NAMM

I recognize Ryan from the Symposium. He had a look more of trepidation when I picked up the Signatures and Supremes at his Symposium table. Next time ask him how wasted you have to be to get such a horn handed to you.
Steve introduced us to Ryan along with our secret code names. I detected a slight look of caution. Now I know why.
There was a brief inquiry if we knew a “Marty & Grumps”. Honestly I don’t think anyone answered Ryan as spent the next five minutes laughing 🤣. Then the party pigs came out.
 
OK here’s a video showing some of the highlights of the above reporting. It focuses on a few things that I saw, and one I didn’t.

It starts (and ends) with young monster Cole Ashley playing on the Eastman tenor I liked so much, obviously before the G#/Bb bis gismo bar got loose, and the inestimable @PigSquealer fixed!

Notice in the Conn-Selmer booth, in the section on Yanagisawa, there are only altos. Why this is so is a mystery to me. A little later, the video shows Bob Reynolds playing the new Signature USA, and if you glance to the left of the frame, you will see my hand holding my water bottle. My belly also puts in a brief appearance (I’ve tried to train that thing to be less noticeable, but it just won’t listen!) Bob played for about 30 or 40 minutes, then handed the tenor to me. A great experience.

The section of the video where he interviews Theo Wanne and Matt Ambrose is really worth watching. Matt gives the true explanation about the genesis of this relationship, and the complete skinny on how these pieces will be made later.

Here’s the video:
View: https://youtu.be/sK9m_sUyx3w


BTW the horns in this video that I didn’t try are the Cannonball ones. I just don’t like them, though I think that they are probably good for the saxophone world in general.
 
The Connfermentation was SN#46. Clean, well prepared and ready. No loose neck or parts. Solid fabrication with smooth action. A bit heavy on the touch feel. Ergonomics were good for my medium size hands.
So no odd feel for the left thumb on the octave?
 
Thanks for the link Skeller a lot of info... not sure if I am sold on the blue Cannonball but who am I to judge I picked up a Black Ruby alto a closet horn since High school for a song. Like the look of it and the sound from it as a showy horn but not the feel so much of the stones. I may have them replaced with standard pearls if I decide to keep it you do get used to them but hard when switching out horns.

Very interesting on the Otto Link mouthpieces it will shake up the market.
 
In other words, they already sell enough of those. No need to promote them anymore.
....
Marketing logic .....
I could be wrong but I suspect they sell more altos and tenors than sopranos - so by that logic they should have turned up with just their baritones.
I'm also willing to bet that Yamaha were showing off the 280 series altos and tenors.
 
Just to be informed. The producer of the video is a local (LA California) dealer of all products reviewed.
OK here’s a video showing some of the highlights of the above reporting. It focuses on a few things that I saw, and one I didn’t.

It starts (and ends) with young monster Cole Ashley playing on the Eastman tenor I liked so much, obviously before the G#/Bb bis gismo bar got loose, and the inestimable @PigSquealer fixed!

Notice in the Conn-Selmer booth, in the section on Yanagisawa, there are only altos. Why this is so is a mystery to me. A little later, the video shows Bob Reynolds playing the new Signature USA, and if you glance to the left of the frame, you will see my hand holding my water bottle. My belly also puts in a brief appearance (I’ve tried to train that thing to be less noticeable, but it just won’t listen!) Bob played for about 30 or 40 minutes, then handed the tenor to me. A great experience.

The section of the video where he interviews Theo Wanne and Matt Ambrose is really worth watching. Matt gives the true explanation about the genesis of this relationship, and the complete skinny on how these pieces will be made later.

Here’s the video:
View: https://youtu.be/sK9m_sUyx3w


BTW the horns in this video that I didn’t try are the Cannonball ones. I just don’t like them, though I think that they are probably good for the saxophone world in general.
 
One thing I will note about testing any new instruments of any kind or maker. Be it a sax, drums, piano or kazoo.
Like people each is uniquely different.
Take 10 sequential units of a model off the production line. None will preform exactly the same. Really close yes, exactly the same, nope !
There’s also an adjustment period. Becoming intimate usually takes at least a few weeks.
Still consumers first impression feedback is important.
Not bringing your products in the very best condition to an international show is just stupid.
 
I could be wrong but I suspect they sell more altos and tenors than sopranos - so by that logic they should have turned up with just their baritones.
I'm also willing to bet that Yamaha were showing off the 280 series altos and tenors.
On a hunch….Some vendors don’t bring everything to generate new contacts. Post show business calls.
First this is a trade show. Makers and distributors to retailers.
Second tier attendees are the pro working musicians testing products.
There were very few low end student / intermediate models on the floor. Most retailers already know this level of goods.
The new Conn products being the exception.

FWIW overall most all saxophones were in better than average mechanical condition. Far from being at their best, but fairly representative of what Joe consumer would receive on ordering.
The playability setup on 90%+ was disappointing. I witnessed a record amount of mouthpieces shoved almost all in.
Our Wrecking Crew ( aka West Coast Contingent) included. Playing style or mouthpiece didn’t matter.
@skeller047 on Rampone playing Jazz.
@lukehuang77 on Confirmation playing Classical / Gospel
@lig playing Funk
1769494025299.webp

1769494162643.webp

1769494292673.webp
 
The Jupiter altos impressed me. Was a nice surprise to see such a well made product. I couldn’t find a single flaw on the two display altos. The not in public yet JAS1150Q and the JAS1100GOQ in "Gilded Onyx" finish.
The keywork action was smooth as warm butter. Touch feel firm but not by much. For calloused finger tips a positive contact was noticeable (unlike a Conn 6M).

Wrecking Crew member @lukehuang77 did the test drive. “Way better sound and easier to play than my CAS80 Chateau.” Short of doing a repad on his 80 I can’t make it any better. Although I will say at 19 years old it has zero mechanical wear issues. I’m the first person to service it.

Luke was playing the 1150 and didn’t get a picture.
The JAS1100GOQ in Gilded Onyx was beautiful. I especially liked the LH adjustable height palm keys.
1769497133962.webp

1769497253425.webp

1769497416097.webp
 
Other tenors Luke and I gave a battery exam included ;
Trevor James, Julius Keilwerth, P. Mauriat. Yamaha was too crowded.
I briefly looked at the John Packer alto & tenor and moved on. The booth was having a brass demonstration and I didn’t make it back.

JK SX90R Shadow in black nickel with silver plated keywork. The finish was stunning. The amount of hand engraving on a black nickel finish over German nickel silver was just insane. This tenor also has adjustable LH palm key touches. Adjustable in both height and pivot left & right. Medium firm touch feel with comfortable ergonomics. IIRC a single post ( pillar) build on body.
I couldn’t find any flaws in the tone hole fabrication. They’re drawn, machined flat and then a solid round stock ring is soldered on.
In concept these can be (if needed in 2076) leveled, filed or replaced. In other words, fully serviceable.
I do need a better understanding of how this funky G#? system works. The West Coast manager for Buffet Crampon is a customer. Time for a field trip.
1769500904992.webp

 
Other tenors Luke and I gave a battery exam included ;
Trevor James, Julius Keilwerth, P. Mauriat. Yamaha was too crowded.
I briefly looked at the John Packer alto & tenor and moved on. The booth was having a brass demonstration and I didn’t make it back.

JK SX90R Shadow in black nickel with silver plated keywork. The finish was stunning. The amount of hand engraving on a black nickel finish over German nickel silver was just insane. This tenor also has adjustable LH palm key touches. Adjustable in both height and pivot left & right. Medium firm touch feel with comfortable ergonomics. IIRC a single post ( pillar) build on body.
I couldn’t find any flaws in the tone hole fabrication. They’re drawn, machined flat and then a solid round stock ring is soldered on.
In concept these can be (if needed in 2076) leveled, filed or replaced. In other words, fully serviceable.
I do need a better understanding of how this funky G#? system works. The West Coast manager for Buffet Crampon is a customer. Time for a field trip.
View attachment 32696
A sax I would like to own/play. Hard to justify an expensive sax and just playing out in the woodsheed.
 
Zero! This example was like it just came off my bench. Very refined setup. There’s a chance corrections were made from previous players comments ? Ryan attends shows for R & D feedback. He’s the director of product management, woodwinds.
I suspect then that the left thumb rest placement is only a problem for those like me, afflicted with the ability to palm... and even juggle... basketballs.

Ryan is the first guy you see when walking in through the main entrance to the Symposium vendor room at the Selmer table. A genuinely nice guy for what he's there for. But yeah, the big difference with NAMM and the Symposium is that the former is geared towards the industry when the latter is purely a gift for players given all the performance options in addition to a room full of horns, and now these days more mouthpieces to try. The very best part? Very few guitars are spotted. If at all.
 
A sax I would like to own/play. Hard to justify an expensive sax and just playing out in the woodsheed.

You only go around once, if you can afford it enjoy it.

I am locked on my Series III tenor and my trio of Jupiter Artists, steady reliable work horses. I gig a lot so my gear more than pays for itself yet recently I am flirting with new horns to me. I am not a flipper. I have no time or expertise for that but when a nice clean horn presents itself I may buy if at a decent price. Always buy 2nd hand at a price that allows me to send it down the road without cost hopefully. If I were to buy new I would have to commit to a long term relationship.

I am not recording for pay just playing and enjoying the scene and playing setups that work best for me at the moment.

This attached review below gives me pause as I am considering buying a CSS80 soprano. Now I get tempted by Pig squeaks & @lukehuang77 review on the new Jups! My Artist Jups are about 15 years old, bought new with the soprano and tenor overhauled with Pristini pads and new springs two years ago. Pads were shredded and a broken spring on the tenor when I finally sent it in.

"Wrecking Crew member @lukehuang77 did the test drive. “Way better sound and easier to play than my CAS80 Chateau.” Short of doing a repad on his 80 I can’t make it any better. Although I will say at 19 years old it has zero mechanical wear issues. I’m the first person to service it."

Keep the reviews coming "Wrecking crew"!
 
First this is a trade show. Makers and distributors to retailers.
I think that's what I was getting at above...
S&M want to walk away with, I guess, distribution agreements, contracts to in supply a district or something.
Then, for a retail oriented industry, crowds of punters enjoying the kit are part of the booths display. Happy members of the public are sales folk saying to distributors; "look! punters like our product. We can supply kit that'll sell".
Given which, a full range of working kit should be important.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,061
Messages
578,378
Members
8,129
Latest member
Bartman
Back
Top Bottom