Mouthpieces Bargain metal mouthpieces !

Has anyone done a toxicity test on any of these?
Good question. China has large problems with the high blood lead content in childeren. Cheks on industry are failing despite the attention in Chineese media. A high lead content helps with brass casting, If you buy directly from China there is not much change that this product is checked on its lead content.
 
My first metal mouthpiece was a "Classic" (Amati) that I bought in 1973. I didn't care if it was a Link, Larsen ..... copy. It was a mouthpiece wo baffle. I played it for some years and it was ok. My second metal mouthpiece was a "B&S 230" (tip opening 2,3 mm). I played better on that mouthpiece compared to the "Classic". Then I bought a used Larsen ss 2 chamber before I got my first high baffle chamber piece; Berg Larsen 0 chamber (high baffle). I tried a Dukkoff and I liked them and the price as well. My last metal mouthpiece is Rovner Deep-V high baffle. The "sky opened" the first time I "blow/played" one. The day I can play a Rovner #9 (.120") or #10 (.130") I'll lay down my saxes.

The chinese Lawton copy can be a good mouthpiece. The low step baffle meets the bore/chamber ..... ????
 
Survived 30 years of leaded petrol and various other toxic dangers throughout life I don't think a mouthpiece would bother me.

Toxicity? ****.. unless I'm grinding it to powder and injecting it I think I'll be alright 😉

Point taken, but its about choice, I had one of these mouthpieces a number of years ago, came with a horn I bought, it was awful,table wasn't flat, rails were uneven wasn't good to play, maybe I was unlucky, maybe they are better built these days,
but if you have one that your happy with then great.
 
Point taken, but its about choice, I had one of these mouthpieces a number of years ago, came with a horn I bought, it was awful,table wasn't flat, rails were uneven wasn't good to play, maybe I was unlucky, maybe they are better built these days,
but if you have one that your happy with then great.
The faults you mention were quite evident in the Otto Link STM I looked at tbh.. the rails were very uneven etc etc.
The Chineseium job I have to say is very accurately machined, presumably CNC type production process..
 
Have you measured the facing?
Facing length about 19mm, at a guess the tip opening looks like approx what I'd think of as a 5 ( I know the 'numbers' are different between makers ) I'm not fussed about doing macho weight lifting competitions and being a proper geezer with a 11* and a lolly stick reed !
The rails look to be well finished and symetrical , the table flat, has a modest step baffle but isn't thin sounding or a 'screamer' it's a well made usable mouthpiece that plays perfectly adequately. Well worth the price of admission (especially with a free alto MP thrown in ! ) 🙂
 
Probably not. Has anyone done a toxicity test on an Otto Link or Meyer?
A reputable manufacturer is interested in further sales and as such, IMHO would make strides in ensuring that their product is not harmful from the knowledge base at that time.

About maybe 20 years or less there was in the news, a discovery that some children toys from the Orient were painted with lead based paint. The manufacturers were put on notice. I haven't heard anything lately, so I think that was corrected.

If one is not comfortable buying inexpensive mouthpieces on the open Internet, then may play it safer by buying from reputable music sources. One may pay a little extra, but they prescreen what they sell overall.

Of the inexpensive mouthpieces I have, these are Brilhart designed Rico Graftonites and Metalites, and several Bari (a US manufacturer) mouthpieces. Except for 1 Metalite, these were under $30 US.

I know these are not metal mouthpieces, but the Ricos (depending on grading spectrum) are said to be chambered similarly to metal mouthpieces.

I refrain from other inexpensive mouthpieces sold by other than reputable dealers because it is still sort of a "Wild West" out there.
 
A reputable manufacturer is interested in further sales and as such, IMHO would make strides in ensuring that their product is not harmful from the knowledge base at that time.
I, too, would like to believe that all manufacturers put product safety ahead of profits, but it just isn’t so.
If one is not comfortable buying inexpensive mouthpieces on the open Internet, then may play it safer by buying from reputable music sources. One may pay a little extra, but they prescreen what they sell overall.
How do you propose that “reputable music sources” test for toxicity?
 
Facing length about 19mm, at a guess the tip opening looks like approx what I'd think of as a 5 ( I know the 'numbers' are different between makers ) I'm not fussed about doing macho weight lifting competitions and being a proper geezer with a 11* and a lolly stick reed !
The rails look to be well finished and symetrical , the table flat, has a modest step baffle but isn't thin sounding or a 'screamer' it's a well made usable mouthpiece that plays perfectly adequately. Well worth the price of admission (especially with a free alto MP thrown in ! ) 🙂
No, I am not talking about its approximate length, but the accuracy of the actual facing.

“Set your expectations sufficiently low and you’ll never be disappointed” - Sum Gaia.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,061
Messages
578,370
Members
8,128
Latest member
Roger Atlas
Back
Top Bottom