Mouthpieces Andy Sheppard Autograph mpc

Yes there are a few lucky folks out there who just find the right thing and stick with it.
I've done the opposite of you - used to do the whole bright Brecker thing with Dukoffs/ Guardalas, softish reeds and so on but the last 10 years or so go very much for the hard "dark" side. I had the sound concept but still had to go through a few combinations to get it right - now using an older Navarro Maestra with 3.5/4 reeds. It's all just taste, but I don't personally buy into the Holy Grail set up - there's nothing wrong in trying stuff out (occasionally!!!)
Strangely enough I normally don't change my setup for years,play 80% alto and for well over 13/14 years played a Runyon Quantum Delrin 10 that i bought off ebay cheap,only changed that because of dental issues that made playing metal and thin profile mouthpieces uncomfortable and then moved HR RPC's,now dental issues sorted have moved to play metal Absolute + mpc with an FL Spectruoso sphere as backup.
 
Have just acquired a Runyon Quantum 8. Supposed to be very loud, can't wait to try....
Bet my Quantum 16's louder. 😉

I don't think my idea of a decent tenor sound has changed much over the last 40 years. I started with a steel Berg 105/0 and stayed with Bergs (2 others I think) for about 20 years. Then the Runyon, MBII and currently a PPT. Quite a few others have come and gone but those have been my main pieces. Of course I'm not completely happy with the current choice. Anyone do something like a cross between a PPT9* and an MBII?
 
Forget the Andy Sheppard Autograph mouthpiece,i could do with some of Andy's talent in a can,now that would be worth £499 of anybodies money.:sax::sax::sax:
Well, quite.
Mr Sheppard started playing at about the same age as me and at about the same time (a bit later actually). And that is where the similarity ends. I suspect he made better use of his time.
 
Anyone do something like a cross between a PPT9* and an MBII?

PMT ?

On a serious note, I have a one-off metal mouthpiece made by Lawrie Waldron for Snake Davis that you might find interesting and might be a half-way house between those two. It has a 0.120" tip opening, high baffle and smooth drop-off into a large chamber. I could bring it along to the London meet tomorrow if you would like to play it (but it isn't for sale).

Rhys
 
PMT ?

On a serious note, I have a one-off metal mouthpiece made by Lawrie Waldron for Snake Davis that you might find interesting and might be a half-way house between those two. It has a 0.120" tip opening, high baffle and smooth drop-off into a large chamber. I could bring it along to the London meet tomorrow if you would like to play it (but it isn't for sale).

Rhys
Rhys,i have tried that mouthpiece,from what i remember its a excellent piece,i was offered it by Lawrie but at the time i wasn't playing a lot of tenor so i passed on it.
 
Rhys,i have tried that mouthpiece,from what i remember its a excellent piece,i was offered it by Lawrie but at the time i wasn't playing a lot of tenor so i passed on it.

And the very generous Lawrie gave it to me for nothing ! What a lovely man he is as well as a great craftsman and what a shame he is no longer doing mouthpieces.

You have to be careful to get the whole set-up right otherwise it can get too bright or even harsh. But it is a fine mouthpiece.

Rhys
 
And the very generous Lawrie gave it to me for nothing ! What a lovely man he is as well as a great craftsman and what a shame he is no longer doing mouthpieces.

You have to be careful to get the whole set-up right otherwise it can get too bright or even harsh. But it is a fine mouthpiece.

Rhys
Lawrie is a true gent,he also helped me with refacing work on a number of pieces after i bought a couple of mpc's off him,sometimes you had to force money into his hands,i wish too that he still did mouthpieces,like you said he is a great craftsman.
Enjoy the saturday meet,hope its a good day.
 
Hi Guys. Andy has been fantastic and a privilege to work with and I'm extremely happy with the way these are turning out. For those interested in the details, it's based on a Hollywood Dukoff chamber, but with a lot of little changes to the design (angles, baffle, beak, --- lots of things). So it's a unique piece, but still very much rooted in tradition. Since it's a non-plated finish I do them out of lead-free brass.
 
Hi Guys. Andy has been fantastic and a privilege to work with and I'm extremely happy with the way these are turning out. For those interested in the details, it's based on a Hollywood Dukoff chamber, but with a lot of little changes to the design (angles, baffle, beak, --- lots of things). So it's a unique piece, but still very much rooted in tradition. Since it's a non-plated finish I do them out of lead-free brass.
Very interesting to hear that from you, Morgan.

Who has decided that it is to have a non-plated finish and would it be available as special order with your excellent Rhodium plating ?

Rhys
 
We wanted it to match the Andy Sheppard saxes, so that's why the tumbled finish. As for special orders, I'm not selling these direct, just making them, so for any orders special or otherwise talk to your retailer
 
Prompted by an alert for an eBay 7* I idly googled this mouthpiece just now to see whether it is for resale anywhere else online, and found this thread once more

I have a 10 tip, bought at a good price off of eBay in 2018

It's a very reliable and well made 'piece and easy to play with the softer reeds that I choose anyway. I use this piece for practice and playing in a jazz band. I'd recommend anyone at least intermediate level to try, if given the chance
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,427
Members
8,129
Latest member
Bartman
Back
Top Bottom