Playing the saxophone advice on recording stuff needed

Hi Chris, I guess for a first attempt at recording with a backing track it wasn't too bad, although its sounding worse and worse to me as I get better! There was no reverb or anything added to the recording, it was just an MP3 track and then my mic recording of the Sax. I'm not really too worried about adding any effects just yet, I'm mainly using the mic so I can listen to all my flaws and try and improve on them.

The Sax was very close to the microphone when I recorded that, probably too close, but I've got a bit more used to it now and moved further back, I've just increased the gain on the mic to compensate.

One think to note about the mic I'm using regarding monitoring... the sound that comes through the headphones from the mic is actually directly from the mic rather than going to the computer and then back to the mic, this pretty much eliminates the lag completely regarding what goes into the mic.

Hi Jason,

That's quite a neat mic you've got there, I've just downloaded the manual. Shure look to have overcome the issues I was worried about. (Not sure they were worth worrying about in the first place but until you get to play with something you never know.)

The PG27-USB large diaphragm side-address condenser microphone features a neutral frequency response and low-self noise for faithful reproduction of a wide variety of sound sources—from piano and wind instruments to drum overheads, acoustic guitars, and vocals.
I love the marketing, that description is the same for nearly all large diaphragm mics!

As you said, the variable gain stage pre-amp is prior to the analogue to digital converter and that's exactly where you'd want it. Monitoring is direct and by the sounds of it analogue with a blend control, again another thumbs up.

The only limitations are that you are probably limited to 3-5m cable length without a repeater and a 48kHz top sample rate, but when you consider CDs are at 44.1kHz your already doing a bit better. Having said that, if you're playing along with a CD I'd set it to 44.1kHz.

I hope you post more recordings as you do them.

With regard to reverb, it's a subjective thing and easy to be a bit heavy handed with it, or maybe that's just me. Anyway if you are close mic-ing you will be reducing the natural reverb of the room that's recorded as well, so it might sound a touch dry. Also the backing track will most likely have been mastered with a bit of reverb and if you want to sax it sit in the mix a bit better, adding reverb to the track can help.

Best wishes,

Chris
 
Hi Chris,

As it happens, the 3m cable that it comes with is way too long for me! so the length isn't an issue for me, but worth noting for others who need to consider this.

The quality as far as as I was concerned is also plenty good enough for me. As I said in an earlier post, even if you have the best mic in the world that records the slightest of sounds, its only as good as what you play it back on, and all I will be playing it back on is either through my PC or uploading it to a site like this for instance which means you will need to compress the file in most cases anyway, thus reducing the quality. I learnt this lesson after buying a top end video camera and finding that everything the recordings were being played back on could not reproduce the recording at its fullest! so I wasted a lot of time and money there. But obviously it depends on what you want to do at the end of the day.

I will have a mess about with reverb and see how it goes, although you said Audacity wasn't great for this so I might try some other software at some point, unless of course I can get the natural reverb of the room sorted, although my room is very small so it might not be so easy!

Cheers
Jason
 
Well guys I'M BACK

I've quickly read through all your posts all very interesting.your right about the number of mics available at the shop,they seem to specialise in A.R.T. products and had about six of there mics on display

I showed him the list of mics I had and right at the top was the rhode NT2A he immediately said thats the one to get you can't get much better than that but they are around £200.

they did have a samson cuo1 but I was thinking more of the cuo3if I went samson

they had an A.R.T. USB DUAL PRE interface for £70.00 which I bought the guy said why not try it with your cheap mic first this is getting painful I keep stopping to correct errors and losing 2 or 3 lines of type I dont know what I'm doing to cause this.


I mentioned programs to him and reaper imparticularly he said this was a great program and he used it himself

I have just tried to load the cd for the interface no joy my pc illiteracy coming to the front again it's supposed to load audacity with it as well but zilch...bye for now john🙁
 
Last edited by a moderator:
Well guys I'M BACK

I've quickly read through all your posts all very interesting.your right about the number of mics available at the shop,they seem to specialise in A.R.T. products and had about six of there mics on display

I showed him the list of mics I had and right at the top was the rhode NT2A he immediately said thats the one to get you can't get much better than that but they are around £200.

they did have a samson cuo1 but I was thinking more of the cuo3if I went samson

Welcome back John,

Just out of curiosity why the Samson CUO3 over the CUO1?

they had an A.R.T. USB DUAL PRE interface for £70.00 which I bought the guy said why not try it with your cheap mic first this is getting painful I keep stopping to correct errors and losing 2 or 3 lines of type I dont know what I'm doing to cause this.

Is this the one?

lg_usbdualpreps.jpg


I have just tried to load the cd for the interface no joy my pc illiteracy coming to the front again it's supposed to load audacity with it as well but zilch...bye for now john🙁

From their website:

It will work with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista... No special drivers are needed.
This would suggest you don't need to load anything from a CD for it to work although there may be advanced features that require specific drivers or software. Also any version or Audacity on a CD is likely to be older than the version you download from their website.

All the best,

Chris
 
REAPER 3.35: http://www.cockos.com/reaper/download.php

I presume it would be the first one on the list for you: Windows (4.4MB installer)

Just go to the link above and click on the 'Windows (4.4MB installer)' and it should automatically download.

Hope this helps,

Chris

Hi chris

Thanks again for the advice,I went through your link and it worked fine this time one of the problems I have when I see a list like that is I haven't a clue which one to pick, I'm sure I clicked on them and nothing seemed to happen.Anyway thanks to your help I have it installed now

When I opened it up it asked me a question to choose an audio system options are

wave out
WDM Kernel Steaming
direct sound
wave out
asio
dummy audio

Also there is an option input and output

input

microsoft sound mapper
AUX(realtekhigh definition

output

more or less the same

TILT I suppose you can just accept the ones that are already in the boxes because it's already made the best choice for you but I don't know

When I went to the download list to install reaper which I have done there were two downloads for audacity there as well, so I installed them too the more the merrier eh ,they are all showing on my desk top so I suppose I can have a play with both

Your QUESTION ABOUT THE MIC I WAS THINKING THAT THE03 HAD A SWITCH DIRECTION FOR BETTER CLOSE micing and 01 didn't

When I plugged the interface in this time a pop up came up in the bottom right corner saying the the driver was being installed and then that it was ready so I suppose that's sorted then and yes it is the one in your pic.

I'm going to submit this now and then go back to your post and see if I've missed anything but thanks again for all your help with out it I think I would have a sore head and some dents in the plaster walls...john

PS the type in capitals on the mic question had just disappeared when I went through it before posting and I had to put it in again I don't know whats causing that:w00t::welldone
 
Last edited by a moderator:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,408
Members
8,129
Latest member
Bartman
Back
Top Bottom