Tech/maintenance Workshop damage

Back in my London days I used to share a basement workshop with a strings repairer and a brass guy. We did a lot of work for the London schools and, as a result, had an archway under the street filled with instruments that were written off due to being beyond economic repair. Most of these got sold to folks who wanted to have a go at fixing them up, or to restaurateurs who wanted stuff to hang up on the wall.
But we also used them to put the collywobbles up the clients.
If a strings client was coming down the stairs, the strings guy would bung a written-off violin on his bench - and just as the client hove into view he'd belt the violin with a big mallet and say something like "I can stand people who won't pay their bills!!".
I still have the sax I used to use for this prank hanging up on the wall of my workshop.

There were a couple of times when the client turned tail and headed off back up the stairs...and we'd have to go chase them down and explain it was all a joke.
Would have been lovely to have had a webcam going!
 
Oh. My. God! Whether it is a 22-year-old car, my lawn (do youse guys say "garden?"), a saxophone I bought new in 1966, or something I just bought off of Ebay--it must be visually stunning, or I just can't bear it. My heart goes out to the OP, I would be crushed. And your antics and jokes? You'd probably be calling an ambulance as I lay unconscious on the floor!!!

But assess a value? Pretty hard. **** happens. My tech often lets me be present for work, as most would want to be for a baby's operation. I almost need to be anesthetized if he pulls out soldering stuff. Being a bari primary, I need psychotherapy after viewing former school owned baris on Ebay, many with outrageously hideous solder work.

To always be ready for what a tech might need to do, I have this book I study before going--called "Haynes Saxop---oh wait--you already know about this!!!
 
Oh. My. God! Whether it is a 22-year-old car, my lawn (do youse guys say "garden?"), a saxophone I bought new in 1966, or something I just bought off of Ebay--it must be visually stunning, or I just can't bear it. My heart goes out to the OP, I would be crushed. And your antics and jokes? You'd probably be calling an ambulance as I lay unconscious on the floor!!!

But assess a value? Pretty hard. **** happens. My tech often lets me be present for work, as most would want to be for a baby's operation. I almost need to be anesthetized if he pulls out soldering stuff. Being a bari primary, I need psychotherapy after viewing former school owned baris on Ebay, many with outrageously hideous solder work.

But it's not a baby, not even a puppy. It's a mechanical device. Yep, a tool, a machine.
 
Oh. My. God! Whether it is a 22-year-old car, my lawn (do youse guys say "garden?"), a saxophone I bought new in 1966, or something I just bought off of Ebay--it must be visually stunning, or I just can't bear it. My heart goes out to the OP, I would be crushed. And your antics and jokes? You'd probably be calling an ambulance as I lay unconscious on the floor!!!
Would that be after a (presumed) significant other read the first sentence?
 
Exactly - you are plucking a value from thin air with the intent of starting high to leave room for negotiation. Yes, I read what you said. I am confident that your repairperson feels bad about it. No need to take advantage of something that was an accident. If you intend to build a good long-term relationship with your repairperson, start with compassion and goodwill.
I spend a lot of time doing dispute resolution: your points are Sound and it would be a bad job if I had acted in any other way! If only more of us could stand by such principles! I did feel sorry for the guy, who was trying to help - but then he did act without authority in a way that left an unnecessary blemish on a fine-looking sax.
 
Value: plucked from the air in all liklihood, then boosted a bit to allow for negotiation.
I have a list of other gnash-generators at the ready.
And, funnily enough, It plays and feels pretty much like the same horn.
Bah. Where is the fun in that? No conflict, no suspense, and no cliffhanger. Definitely not a recipe for modern entertainment.
Fair point. I shall try to do worse next time.
 
Back in my London days I used to share a basement workshop with a strings repairer and a brass guy. We did a lot of work for the London schools and, as a result, had an archway under the street filled with instruments that were written off due to being beyond economic repair. Most of these got sold to folks who wanted to have a go at fixing them up, or to restaurateurs who wanted stuff to hang up on the wall.
But we also used them to put the collywobbles up the clients.
If a strings client was coming down the stairs, the strings guy would bung a written-off violin on his bench - and just as the client hove into view he'd belt the violin with a big mallet and say something like "I can stand people who won't pay their bills!!".
I still have the sax I used to use for this prank hanging up on the wall of my workshop.

There were a couple of times when the client turned tail and headed off back up the stairs...and we'd have to go chase them down and explain it was all a joke.
Would have been lovely to have had a webcam going!
Anyone upset or harmed by Mr Howard’s story can get free aversion therapy sessions from Wes Lee Music Repair at YouTube, such as this: (the 10-pin bowling pin is deployed at around 4:25).
View: https://youtu.be/xy4ra8ULz6M
 
Last edited:
"I can stand people who won't pay their bills!!"
I need help from someone that I can bring to the repair shops that never remotely kept their estimates for the amount of time required to perform a repair. I imagine a stuntman who can fake taking a really bad punch, while I scream: "I hate when people don't keep their promises!"
 
Last edited:
Anyone upset or harmed by Mr Howard’s story can get free aversion therapy sessions from Wes Lee Music Repair at YouTube, such as this:
View: https://youtu.be/xy4ra8ULz6M
I've watched a few of Wes Lee's videos, I find them absolutely fascinating: there's a 3 part video of a French Horn with the bell like Bacofoil that is mesmerising -the degree of controlled strength and hand eye co-ordination is something to behold.
 
This is why I generally don't do many walk-in repairs, and the ones I do are for people who are friends and musical acquaintances. 80% of my work is on horns I own, and resell.

This is a tough one, really, from my viewpoint.

First off, let me just say...lacquer "Crazing"...which is what this situation is discussing....tends to happen MORE often during dentwork on a relacquered horn, in my experience.

The tech probably thought he was doing you a favor, whether removing the dings was requested or not. I am glad it resolved amicably, I would have probably resolved it ina similar fashion (apology, small refund or credit to customer).
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,079
Messages
578,702
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom