Veggie Dave
Sax Worker
- Messages
- 3,466
- Location
- Citizen of Nowhere
A few months ago I changed the wireless mic on my tenor over to a Shure system, which has worked perfectly for every single show I've done since.
Like so many other people, I used a cloth strap on the bell to secure the mic transmitter to the sax. While practising and in rehearsals this, too, has worked faultlessly. On stage, with all the dancing and jumping around I do, however, it's been problematic. Because the transmitter is on the left hand side of the horn, it means it's constantly rubbing or knocking my right leg. And that has led to the transmitter being slowly moved until it comes loose from the strapping. Even with constantly checking, it's a big problem - especially on really rocking gigs where you're completely in the zone.
The only solution I could think of was making a solid bracket for the other side of the sax - preferably one that didn't need removing every time the sax was put back in its case. Sadly I no longer have any sort of workshop these days so I needed something already half made and easy to modify.
Yesterday I found exactly what I was looking for.
Ikea make wall brackets to hang their cupboards on. These brackets also come with extension clips for connecting two brackets to each other. The metal isn't too thick or wide, and the clip points looked perfect for keeping a wireless transmitter secure from sideways movement. In fact, it looked like all you had to do was cut the bracket in half, drill one screw hole and you'd have a perfect transmitter bracket.
It turns out I was right. 😎
I'm going to add cloth to its surface to make it less likely to scratch anything, but other than that, it's ready to go.
Tools used were:
Angle grinder
Drill
Like so many other people, I used a cloth strap on the bell to secure the mic transmitter to the sax. While practising and in rehearsals this, too, has worked faultlessly. On stage, with all the dancing and jumping around I do, however, it's been problematic. Because the transmitter is on the left hand side of the horn, it means it's constantly rubbing or knocking my right leg. And that has led to the transmitter being slowly moved until it comes loose from the strapping. Even with constantly checking, it's a big problem - especially on really rocking gigs where you're completely in the zone.
The only solution I could think of was making a solid bracket for the other side of the sax - preferably one that didn't need removing every time the sax was put back in its case. Sadly I no longer have any sort of workshop these days so I needed something already half made and easy to modify.
Yesterday I found exactly what I was looking for.
Ikea make wall brackets to hang their cupboards on. These brackets also come with extension clips for connecting two brackets to each other. The metal isn't too thick or wide, and the clip points looked perfect for keeping a wireless transmitter secure from sideways movement. In fact, it looked like all you had to do was cut the bracket in half, drill one screw hole and you'd have a perfect transmitter bracket.
It turns out I was right. 😎
I'm going to add cloth to its surface to make it less likely to scratch anything, but other than that, it's ready to go.
Tools used were:
Angle grinder
Drill


