Saxophones What Model Blessing Tenor is This?

ToneRanger

Member
Messages
8
I recently obtained a Blessing Tenor sax while helping clean out a storage area at my church - it's free, so I'm not expecting anything, but I cannot seem to find a model name or # to know what I have.

While I know Blessing was based in Elkhart, IN, it says made in Taiwan so I'm assuming it's a student model.

When I google it, everything new comes up in the $3K range, but used I'm seeing for around $600 or less.

Any guesses?

View attachment 186730
View attachment 186731
View attachment 186729
 
Try this again...
20240822_182634.webp

20240822_182247.webp
 
Looks OK, like a standard reasonable quality student sax. Blessing in recent years has been a bit of a portable brand name, used by a few manufacturers. Good news is yours is from Taiwan, where quality control tends to be a little more consistant than mainland China. It'll probably be OK, but as you've had a very, very long hiatus, it might not be immediately obvious if anything is wrong. Probably worth getting a decent, trustworthy technician to give it a quick once-over, or at least get a player with good recent playing experience have a go on it.
 
OP asked this on SOTW lemme give a fuller answer, David is correct though.

It's a Jupiter-made horn. INTERESTINGLY, I had always ASSUMED that Blessing just contracted Jupe to do a student line horn. Which is what JUpe did for Vito and Evette, they stenciled their 567/587 model student alto/tenor.

Other Blessings I have seen seemed to be these models, the student ones. But THIS one, and another Blessing I saw recently on auction site, are not the base models. They are the intermediate 787's...good horns. Surprising...I wonder if Blessing actually offered two lines of saxes so had Jupe stencil both the student and intermediate.
(This also appears to be the case with Jupe-made Olds saxes, there appear to be/have been both the 5XX and 7XX series horns available thru Olds).

A 787 is a horn at least equal to a Yama 23, quite honestly I'd say the Jupe is a tad better.

So....if a person can get past the fact that their sax is gonna read Blessing on the bell....they should keep it and know they have a good, bonafide intermediate modern horn there.

Blessing specializes in brasswinds, they have always had their saxes stenciled.

Previous notable version of Blessing saxes were made by Buescher in their heyday. They have used other mfr's as well....
 
OP asked this on SOTW lemme give a fuller answer, David is correct though.

It's a Jupiter-made horn. INTERESTINGLY, I had always ASSUMED that Blessing just contracted Jupe to do a student line horn. Which is what JUpe did for Vito and Evette, they stenciled their 567/587 model student alto/tenor.

Other Blessings I have seen seemed to be these models, the student ones. But THIS one, and another Blessing I saw recently on auction site, are not the base models. They are the intermediate 787's...good horns. Surprising...I wonder if Blessing actually offered two lines of saxes so had Jupe stencil both the student and intermediate.
(This also appears to be the case with Jupe-made Olds saxes, there appear to be/have been both the 5XX and 7XX series horns available thru Olds).

A 787 is a horn at least equal to a Yama 23, quite honestly I'd say the Jupe is a tad better.

So....if a person can get past the fact that their sax is gonna read Blessing on the bell....they should keep it and know they have a good, bonafide intermediate modern horn there.

Blessing specializes in brasswinds, they have always had their saxes stenciled.

Previous notable version of Blessing saxes were made by Buescher in their heyday. They have used other mfr's as well....
This was good news.
I mean, a free horn is great either way, but knowing that it is better than entry-level lets me know that any of the struggles are on me to get better.

On SOTW someone mentioned it was proabaly late 90's, and that tracks as the case had an old-school, mail-in warranty card with no website listed and a flyer for a Christmas program dated Dec, 2000 - and I joined the church in 2001 and never met anyone that played the tenor sax.

I haven't been back into the sax long enough to be picky about the brand name - I guess in the guitar world it would be like playing a decent-quality Epiphone or Squier electric - sure, Gibson or Fender brand names carry more clout, but most Epi's and Squiers are their designs and made in their overseas factories anyways.

My birthday is coming up next month, and my wife always complains I never give her ideas, so I'll probably have her get a mouthpiece and ligature upgrade and maybe a more comfortable strap.
 
How does a 787 compare to a 767-769 @JayeNM
Sorry Brother, been a LONG time since I have checked in here.

Depends on the 787.
STS 787 was their early version of intermediate horn, like '87-late 90's.
Then they went to Carnegie XL's and Capital editions in early 2000's...a significant redesign from the STS/SAS lines.
Then those became JTS/JAS somewhere around 2009ish, I think.
At first it was the JTS 787, soon giving way to the JTS 789. THOSE two models are really almost identical to one another. But the JTS 789 vs. the older STS 787 are fairly different.
The latter being better IMHO but the former being no slouch.

There were just some keywork mechanics which improved once the STS/SAS models gave way to the later models. Also bellpiece design and the neck specifications are quite different on the JTS/JAS models.
Tonality improved some as well, although again I wouldn't say the STS787 'sounds bad'. The JTS/JAS's are just my preference in tonality.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,436
Members
8,130
Latest member
tommyliehe
Back
Top Bottom