Saxophones Very Vintage Rampone tenor.

I think the resemblance to Conn begins and ends with the microtuner
The microtuner is more in the style of old V. Kohlert und Sohne or Keiwerth. Pre WWII. They are on some German built saxes as well. Conn micro tuner looks different.

The side Bb key is in one piece. Keilwerth (Nauheim) had that solution to the middle of 70's. My "New King" from -69 have this solution as well. Working but .... The silver plating is worn out on the side Bb touch. You have to press harder and deeper with thisBb solution.
 
t seems to me that there's a bit of a whiff of a Weltklang about the one I've got...
Let's hope ..... .

The pads on the Malerne, "SML", Buffet, Dörfler und Jörka, Weltklang, R&C ...... seems to be too thin? The European saxophone business became so mixed up after WWII. Probably a c 4.0 mm/.160" pad? A 4,7 mm/.185" pad would be better. As a former woodshed-saxophone-repair-man I didn't like to bend keys or built up key cups too much. Even if I just was working on my own saxes . Maybe the tech just had modern style pads in stock.
 
What could be worse? I am lacking the imagination.

Maybe I should reconsider my career. If such a business doesn‘t go bancrupt within 2 years I may open a shop myself and get rich.
What could be worse is causing damage to the instrument. In this case all there is is a crappy pad job (and some scruffy solderwork), but I've seen horns where severe dents have been pushed into the body tube (while attempting to remove others), toneholes filed way too heavily (and broken-through rolls on Conns etc.), mangled and chewed keywork, distorted body tubes and, well, the list goes on.

And folks get away with such poor work because so few players really understand how a horn works or even what a properly working one feels and plays like.
 
Probably a Roth thing. Ferdinando Roth was influential in Milan, while Wero Roth had something to do with Weltklang.
I think I've got some old Weltklang keywork knocking about somewhere - might do some comparisons if I get the time.
 
And folks get away with such poor work because so few players really understand how a horn works or even what a properly working one feels and plays like.
This horn seems to been set to train gorilla grip and make it impossible to learn how a sax should feel. Heavy clamps on the main stack while floating the pads will do this. Really terrible in methods and goals.
 
This horn seems to been set to train gorilla grip and make it impossible to learn how a sax should feel. Heavy clamps on the main stack while floating the pads will do this. Really terrible in methods and goals.
It's possible. I'll have a better idea once I get around to dismantling the horn.
 
This article is almost 20 years old... but it still interesting.

Page_2.png


Page_3.png


Page_4.png


Page_5.png
 
Yep. And the true horror of it is...this isn't the worst work I've seen by so-called professionals.
I’m trying to envision the technique used to accomplish this feat. Best idea I can come up with…..
Hobby hotmelt glue in the cups. Let chill. Place the pads in and clamp down. Place in oven +/- 200°F / 94°c. Bake all day. Let cool and delivered to the customer before anything springs back.

I recently did a service on a B&C tenor. Came with mixed bag of reflectors. Had to make my own replacements. All SS.
Honestly I hated the way it played for me. The owner was thrilled. The Italian goods are completely different animal. Like 24 pivot screws !
1708886751364.webp

1708886994645.webp

1708887181449.webp

1708887242938.webp
 
I’m trying to envision the technique used to accomplish this feat. Best idea I can come up with…..
Hobby hotmelt glue in the cups. Let chill. Place the pads in and clamp down. Place in oven +/- 200°F / 94°c. Bake all day. Let cool and delivered to the customer before anything springs back.

It is a creative and perverted way to use the flute oven method. I think that it will give the aforementioned result after drying the pads for a long time in the oven before you put them in the cups.
 
I like to work warm to warm if possible. I used to warm the keycaps and pads. I used shellac. Probably rubbish but I just worked on my own saxes. When I'm cooking it's important to work warm to warm or cold to cold. Never warm to cold.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,524
Members
8,132
Latest member
LouisJR
Back
Top Bottom