Find the original patent filing and detail drawings in records. Those will show the spring and key design details.It's very basical and minimalist mecanism,
But it's not Adolphe sax son, but it's original father and probably very early because it didn't write address exactly,
It writed only Adolphe sax and Cie à Paris, in early production, it doesn't write the address, just à Paris, it begin to write the address during 1855-1860
Seems I was wrong about the peened pins - they do look like screws.Are the springs holding by screws with slot ?
But still I think this site is fine to have collectors. I am (or have been) a bit of a collector myself. The Grafton (which I am now selling hint hint 😉 )is mostly a collectors item, but I have since sold my Clarosax and Saxie.It would be good if there were a web site that was set up for collectors of rare instruments (maybe there is one?). Most of us on this and other sax sites are players, not collectors.
An example from The Metropolitan Museum of art below. The museum has one of the worlds finest collections of musical instruments.
Aldolphe Sax SN# 12960 alto dated (unverified) 1855.
This example has none of the spring features like the OP’s soprano.
The example also has the address as the OP has mentioned.
2789 numbers apart. 10171 to 12960
View attachment 27096![]()
Adolphe (Antoine Joseph) Sax - Alto saxophone in E-flat - French - The Metropolitan Museum of Art
The Met presents over 5,000 years of art from around the world for everyone to experience and enjoy.www.metmuseum.org
View attachment 27097
Interesting orientation of the strap ring.
View attachment 27098
No, you cannot just add a different extension or neck and turn a c-soprano into a Bb soprano. You would end up with an instrument that is wildly out of tune.After Adolphe sax trying plenty thing, and we can have theory for Removable neck, it would be at possible at the originally it was design in C soprano but with can be adapted with extension in Bb, it's not too hard to made this. It could be explained plenty thing, it's crazy a'd origally thinking but not illogical, maybe it was design and based on soprano in Bb where Adolphe modificated to arrived to obtain soprano in C by many modificate.
The mecanisme is typically Adolphe sax father, writing and logo and typically not address like very old Adolphe sax too, the serials number is 10171, corresponding at 1853, and the exportated Shop on london, installé during this period too.
It's definitively Adolphe Sax father, definitively 10171 is 1853-1854, but now it would be have little modificated by the exportator Shop, that I believe, maybe the horns arrived in Shop in bad condition to play causes by transporter and it modificate to restorate. Today, transporter isn't very precaution, at 19s century, i don't want imagine that.
but it's definitively curiosity and very Nice collector piece, it's litterally museum pieces.
That makes it an even cooler find
1) it appears the OP’s C SOP is unrecorded .
2) Two units with Rudall, Rose, Carte & Co. One listed plus the Op’s are very close in serial number. 10171 and 10183. The later would be excellent for a comparison analysis. “sold 9 Jun 1871” This could be a completely different looking instrument.
RRC & Co were likely regular buyers. Multiple units on the list and two distinctly different addresses.
View attachment 27104View attachment 27105
Thank you for the link. Very interesting archive.
web site that was set up for collectors of rare instruments
this site is fine to have collectors
... on the other side I could play a Buescher Bb soprano mouthpiece on my Buescher C soprano without any problem. I couldn't hear any difference.No, you cannot just add a different extension or neck and turn a c-soprano into a Bb soprano. You would end up with an instrument that is wildly out of tune.
I will absolutely not surprise if it tried, or experimented this thing... on the other side I could play a Buescher Bb soprano mouthpiece on my Buescher C soprano without any problem. I couldn't hear any difference.
The probably did some changes on the tube so a C-soprano would sound like a C- soprano and a Bb soprano would sound like a Bb. But what kind of changes were made? Anyone who can compare a C-soprano with Bb soprano from the same year? Same model, same pitch, same key range ..... .
Conn 2M C-soprano; weight 2 pounds, length 22 ½ inches, bell diameter 3 ½ inches.
Conn 18m Bb soprano; weight two and a quarter pounds, length 22 ½ inches, bell diameter 3 and five eights inches.
Both were LP saxes. Conn just made LP c-sopranos and I think that goes for Buescher as well? So were to find the differences? Just curious .....
If you can push on the MPC far enough, you can play a Bb sop MPC on a c-sop.... on the other side I could play a Buescher Bb soprano mouthpiece on my Buescher C soprano without any problem. I couldn't hear any difference.
The probably did some changes on the tube so a C-soprano would sound like a C- soprano and a Bb soprano would sound like a Bb. But what kind of changes were made? Anyone who can compare a C-soprano with Bb soprano from the same year? Same model, same pitch, same key range ..... .
Conn 2M C-soprano; weight 2 pounds, length 22 ½ inches, bell diameter 3 ½ inches.
Conn 18m Bb soprano; weight two and a quarter pounds, length 22 ½ inches, bell diameter 3 and five eights inches.
Both were LP saxes. Conn just made LP c-sopranos and I think that goes for Buescher as well? So were to find the differences? Just curious .....
Sure ..... of course I was wrong. You*re right. My 18M is also 25½ inches long. I took the info from a Conn model chart and that's chart is wrong. At least when it comes to 18M. But It would be interesting to see the differences between a C-soprano and a Bb soprano.If you can push on the MPC far enough, you can play a Bb sop MPC on a c-sop.
My Buescher c-sop is 21-7/8 in length and 3-1/8 bell diameter but my Conn Bb is 25 -1/2" long, are you sure about your 18M?
