I am thinking die-cast cups and those holes were vents in the die or else caused by the ejector pins but it's only speculation. Die-cast would make sense because you can easily make a wax mold and for small quantities / prototyping it's the way to go.Solder-filled holes? It might be that the barrels feature 'compound rods' - a bit like you find on a flute - whereby a small screw or a pin is used to lock the key to the rod.
Such a featured turned up on a Boosey & Co soprano:
Boosey & Co. Ltd. soprano saxophone review
A workbench review of the Boosey & Co. Ltd. soprano saxwww.shwoodwind.co.uk
Edit: Just seen the original pics...and no, I've no idea what those curious holes are about.
As for the lyre holder; don't forget that the sax was originally invented for French military bands.
We need pictures to confirm, but I think this is actually the backside of a screw hole holding in a flat spring ? I’m not seeing needle springs for other key action(s).Edit: Just seen the original pics...and no, I've no idea what those curious holes are about.
Yes I do believe you have this information. Historically dating and authenticating is a completely different process. The stamp of agent with information is one step of that process. The makers mark could have changed. That would also be a way to date and authenticate the time of build. For instance they were not always serial numbered at the time of making. As an example what if it was made in 1846. It would have certain features. The serial number could have been applied in 1890. In that context the serial number for dating would be incorrect to the origin of the instrument.Hum sorry but, i know the date of Making this c soprano,
It's really 1853, it's simply the serial number 10171 by Adolphe sax
You see on many Website and document listing by edimburgh university, it tries to reference all instrument by Adolphe sax by reference,
It's between 1852-1853
It's 1853, they're serial number, it correspond to this any years,Yes I do believe you have this information. Historically dating and authenticating is a completely different process. The stamp of agent with information is one step of that process. The makers mark could have changed. That would also be a way to date and authenticate the time of build. For instance they were not always serial numbered at the time of making. As an example what if it was made in 1846. It would have certain features. The serial number could have been applied in 1890. In that context the serial number for dating would be incorrect to the origin of the instrument.
For now it is documented that at least the agent existed in a given time period from the stamp. No earlier, no later.
The way the springs are installed with the combination of the key foot is also a clue for dating.
