Saxophones Tenor sax: Buffet 400 vs. Keilwerth ST110 vs. Sequoia

This is an old thread, but to the OP, glad you got the SA80II tenor. I still believe this is the best I have.

What mouthpiece set up do you use?
It might be a coincidence, but I just checked my account a few days ago and saw your post. It's nice to see thread is still "alive"

My tenor setup for tenor Selmer II:

Classical: Selmer S90 190 mouthpiece, Rovner Versa/Bambu ligature, Vandoren V12 3,5 or Legere Signature 3,5 reeds

Jazz/Funk: D'Daddario Select Jazz D7M, Rovner Versa/Bambu Ligature, Legere American cut 2,5/Select Jazz 3s/Vandoren Java 2,5/3 reeds. (as you can seen, I haven't quite commited to one type of reed yet, also MPC is to be changed-see below 😀 )

I also have basic Selmer and Vandoren MIO ligatures, but they don't hold the reeds in place very good, especially the Legere ones.

I also habe problems with D'addario mouthpiece, it tend to be VERY sharp, so I have to have it almost completely out on cork to be able to play in tune. This of course brings out other problems, as the sax doesn't work properly. I don't know what's with those mouthpieces, on alto I have exatly the opposite problem with the same MPC(marble edition), I put it in till the end of the cork and it's still flat(not such a problem, because I regularly use Meyer on alto). That being said, I don't have similar problems with any other mouthpieces and I also tried both D'addarios on other saxophones...same problem.

Sooo. any suggestions for a solid tenor mouthpiece? Otherwise I like the D'addario, but this intonation problem is not good for a long term 😀
 
It might be a coincidence, but I just checked my account a few days ago and saw your post. It's nice to see thread is still "alive"

My tenor setup for tenor Selmer II:

Classical: Selmer S90 190 mouthpiece, Rovner Versa/Bambu ligature, Vandoren V12 3,5 or Legere Signature 3,5 reeds

Jazz/Funk: D'Daddario Select Jazz D7M, Rovner Versa/Bambu Ligature, Legere American cut 2,5/Select Jazz 3s/Vandoren Java 2,5/3 reeds. (as you can seen, I haven't quite commited to one type of reed yet, also MPC is to be changed-see below 😀 )

I also have basic Selmer and Vandoren MIO ligatures, but they don't hold the reeds in place very good, especially the Legere ones.

I also habe problems with D'addario mouthpiece, it tend to be VERY sharp, so I have to have it almost completely out on cork to be able to play in tune. This of course brings out other problems, as the sax doesn't work properly. I don't know what's with those mouthpieces, on alto I have exatly the opposite problem with the same MPC(marble edition), I put it in till the end of the cork and it's still flat(not such a problem, because I regularly use Meyer on alto). That being said, I don't have similar problems with any other mouthpieces and I also tried both D'addarios on other saxophones...same problem.

Sooo. any suggestions for a solid tenor mouthpiece? Otherwise I like the D'addario, but this intonation problem is not good for a long term 😀
How odd. I have used D'Addario mouthpieces on tenor and alto, and not had the slightest issue with tuning. For tenor, I have a D9M, although I have also tried several others on a pass-around. On alto, a D7M. Both alto and tenor saxes are Yanagisawa. Both are installed to about the middle of the cork, and both are easy to play in tune. I use a Legere synthetic reed on tenor, a Rico Select Jazz 2H on alto.

My current favourite tenor piece is a SYOS custom, which I find to be the most flexible and adaptable of any mouthpiece I've played in 45 years,
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,062
Messages
578,404
Members
8,129
Latest member
Bartman
Back
Top Bottom